The Turbo Installation: A Step-by-Step Guide

This video has just been uploaded and it's going to feature the installation of a turbocharger on Charlie's Wagyu, which is an eBay find. The total cost for this upgrade was $120, including shipping, and it came with a variety of gaskets for the exhaust system as well as the oil fitting. This means that the new turbocharger should work fairly well without major issues.

However, there were some initial challenges to overcome before installation could begin. The downpipe from the previous setup doesn't quite fit with the new turbocharger due to its three-inch diameter and it hits the transfer case in the oil pan right here. To resolve this issue, the team decided to cut off four inches of the exhaust pipe as they found that the stock one was too long for the new turbocharger.

The next step involved cutting a piece to fit under the transfer case, allowing the flange to line up properly with the turbocharger. This would require precise measurements and adjustments to ensure a smooth installation process. The team is confident in their abilities and are eager to get started on this challenging project.

As the team began working on Charlie's Wagyu, they discovered that the new turbocharger required some special modifications. The exhaust pipe needed to be cut off by four inches due to its length, which would allow it to fit properly with the new setup. Additionally, the team found that the stock exhaust pipe was too long for the new turbocharger, so adjustments had to be made.

In a moment of levity, one member of the team joked about Charlie's first time using a MIG welder, and the team couldn't help but chuckle at the sight of it shaking in his hands. The welder proved to be quite useful in filling small holes and making various adjustments to the setup.

The next challenge involved removing the transfer case from Charlie's Wagyu to access the oil pan. This required a bit more effort, as the team had to take apart other components to get to the desired location. Once they finally reached the oil pan, they found it to be filled with various rods and sleeves.

In this section, we can see that the eagle rods are still present, even after removing some of the older components. The team also noted that there were still some issues with the sleeves, which may require further attention during the installation process.

Moving forward, the team needed to decide where they would drill the next hole for the turbocharger. This was an important decision, as it would determine how effectively the new setup could function. Fortunately, the team had access to a MIG welder, which allowed them to make precise adjustments and repairs as needed.

In a moment of whimsy, one member of the team decided to color their "enemy girl" back in, seemingly referencing an unrelated topic or inside joke. The only remaining component was the cleavage well, which provided a visually interesting distraction from the main task at hand.

As Charlie prepared to restart his engine for the first time, the team couldn't help but feel a sense of excitement and anticipation. They had all worked tirelessly to get this far, and it would be thrilling to see the new turbocharger in action.

In an amusing twist, one member of the team noted that Charlie's artwork on the valve cover was his "best attempt" at creating something, despite some minor setbacks during the process. The end result showed a crude yet charming drawing of what appeared to be a baby - it will surely serve as a reminder of this memorable project.

Finally, with everything bolted down and ready for ignition, the team stood nervously in anticipation of Charlie's engine roaring back to life. With their hard work and dedication, they had overcome numerous challenges and brought this turbocharged engine to life.

"WEBVTTKind: captionsLanguage: enso this just came in today this is going to be the turbo for Charlie's Wagyu over there it's just a eBay turbo should work fine for now out of brand-new this thing was a hundred and twenty bucks ship should work pretty good came with all these gaskets for the exhaust stuff and the oil fitting so the down pipe that we got for the wagon doesn't quite fit because it's a three inch and it hits on the transfer case in the oil pan right here so what we're going to do is cut it right here and add without like three inches or so we're about to measure it so then it will go under the transfer case and clear everything because right now as you can see the flange doesn't quite line up with the turbo so it just needs to come up a few inches perfectly straight that'd be good yeah yeah okay so we'll get that got this piece made for it when we get that welded up real quick all right so now we got to cut off four inches off his exhaust we're just going to cut it like up here somewhere because the stock one is too long to bolt up to her then we got for his turbo haha oh what'd you do you saw it's shaking it was shaking so our Charlie's first time using a MIG welder you can you get this right here closer and see how long your wires and you shove it in there a little more and you fill that little hole right there too so bad that's right no one has to see we got a little volcano going that one was stripped so bad crossbar this that's right it'll work getting the filter off kind of gonna feed the turbo some oil got pancakes this is pancake my total nobody please he awesome total oh cleaning this cage out right now and go buddy be free so Charlie has to take his transfer case off to to get his oil pan off so that we can top a return line into it for the turbo we just got the pan off can see all those rods in there bill off what I can't get the sleeves on camera but yeah let me see it eagle rods yeah sleeves you can still see the holding works hashtag fully built hashtag via killer hashtag sleeper well you find out where you want to drill that hole I'm going to color my enemy girl back in the only thing left is her cleavage well in our face kind of looks she got I keep making a copy of a copy now she has Down syndrome well Charlie wants to restart with the art no more chicken hugs for life goodbye Ling Ling so we got a picture Harambee right here we're both trying to draw draw and mine was like you said six got peeled off and he's all baby and then it's Charlie's over here he drew it in ten a baby with a vengeance it was our best attempts he will forever live in our memories and on Charlie's valve-cover not forever minutes yeah until he starts it and then he's going Dave he looks like a freaking demon just got his oil returned welded in this one's clamping on to that guy I did just like I did my wag oh it's welded up from the inside good to go all right Charlie just got all his oil lines hooked up got everything bolted down about to fire it up right now as fineso this just came in today this is going to be the turbo for Charlie's Wagyu over there it's just a eBay turbo should work fine for now out of brand-new this thing was a hundred and twenty bucks ship should work pretty good came with all these gaskets for the exhaust stuff and the oil fitting so the down pipe that we got for the wagon doesn't quite fit because it's a three inch and it hits on the transfer case in the oil pan right here so what we're going to do is cut it right here and add without like three inches or so we're about to measure it so then it will go under the transfer case and clear everything because right now as you can see the flange doesn't quite line up with the turbo so it just needs to come up a few inches perfectly straight that'd be good yeah yeah okay so we'll get that got this piece made for it when we get that welded up real quick all right so now we got to cut off four inches off his exhaust we're just going to cut it like up here somewhere because the stock one is too long to bolt up to her then we got for his turbo haha oh what'd you do you saw it's shaking it was shaking so our Charlie's first time using a MIG welder you can you get this right here closer and see how long your wires and you shove it in there a little more and you fill that little hole right there too so bad that's right no one has to see we got a little volcano going that one was stripped so bad crossbar this that's right it'll work getting the filter off kind of gonna feed the turbo some oil got pancakes this is pancake my total nobody please he awesome total oh cleaning this cage out right now and go buddy be free so Charlie has to take his transfer case off to to get his oil pan off so that we can top a return line into it for the turbo we just got the pan off can see all those rods in there bill off what I can't get the sleeves on camera but yeah let me see it eagle rods yeah sleeves you can still see the holding works hashtag fully built hashtag via killer hashtag sleeper well you find out where you want to drill that hole I'm going to color my enemy girl back in the only thing left is her cleavage well in our face kind of looks she got I keep making a copy of a copy now she has Down syndrome well Charlie wants to restart with the art no more chicken hugs for life goodbye Ling Ling so we got a picture Harambee right here we're both trying to draw draw and mine was like you said six got peeled off and he's all baby and then it's Charlie's over here he drew it in ten a baby with a vengeance it was our best attempts he will forever live in our memories and on Charlie's valve-cover not forever minutes yeah until he starts it and then he's going Dave he looks like a freaking demon just got his oil returned welded in this one's clamping on to that guy I did just like I did my wag oh it's welded up from the inside good to go all right Charlie just got all his oil lines hooked up got everything bolted down about to fire it up right now as fine\n"