A New Firmware Update for the Samsung Galaxy S4: UB MG5
There is a new firmware update available for the Samsung Galaxy S4, which was leaked around 5 days ago. The update, known as UB MG5, has been confirmed by Ranjit from tech.com, who recently flashed it onto his own device using the Ka software. Ranjit had previously experienced issues with the previous update, UB MG1, including reduced battery life and laggy performance.
Ranjit's Experience with the New Update
Ranjit decided to share his experience of installing the new update on his blog. He started by connecting his Samsung Galaxy S4 device to his computer using a USB cable and opening up the Ka software. The current version of his device was listed as MG1, and Ranjit noted that he did not receive an over-the-air (OTA) update for UB MG5. Instead, he chose to use the Ka software to manually install the new firmware.
The Process of Installing the New Firmware
Ranjit explained that the process of installing the new firmware using Ka was quite straightforward. He clicked on the "install" button, and the software began to download the necessary files for the update. The size of the download was significant, ranging from 1.7 to 1.8 GB, which Ranjit noted could take anywhere from half an hour to an hour depending on his internet connection.
The Waiting Game
Ranjit explained that once the download was complete, he would have to wait for the installation process to finish. He noted that this process usually takes around 2-3 minutes, but it could be longer due to the size of the firmware update. During this time, Ranjit had to make sure not to disconnect his device from the computer.
The Update Progress
After waiting for a few minutes, Ranjit checked on the progress of the installation. He noted that the software was stating that the "preparation for Galaxy S4 GTI 9500 firw upgrade will proceed." This indicated that the update was being processed, and Ranjit could now wait for it to finish.
The First Boot After the Update
Once the update was complete, Ranjit's device rebooted, and he was greeted with a new Android version. He noted that this process always happens after an update, as part of the normal procedure to optimize apps and ensure smooth performance.
Ranjit's Thoughts on the New Firmware
Ranjit expressed his excitement about the new firmware update and shared his thoughts on what changes it might bring. He hoped that the update would address some of the issues he experienced with the previous version, such as reduced battery life and laggy performance. Ranjit also encouraged his readers to share their feedback in the comments section if they had already installed the UB MG5 firmware.
Improved RAM Availability
Ranjit noticed an improvement in the free RAM availability on his device after installing the new firmware. The amount of available RAM increased from around 700 MB to over 920 MB, which Ranjit found refreshing. He was hopeful that this update would also improve battery life and overall performance.
Conclusion
In conclusion, Ranjit's experience with the UB MG5 firmware update demonstrates the process of manually installing a new firmware using Ka software. The update addresses some of the issues experienced with the previous version, including reduced battery life and laggy performance. Ranjit's thoughts on the new firmware highlight his excitement about the potential improvements it might bring to his device.
"WEBVTTKind: captionsLanguage: enhi there this is ranit from tech.com and actually I got one more firmware upgrade for the Samsung Galaxy S4 and if you recall on July 11th uh we did an update for the Samsung Galaxy S4 it was the UB mg1 update and now I got the UB mg5 update actually this update was leaked around 5 days ago but uh I was not getting the OT update and whenever I tried to update it uh why the phone itself uh uh it used to give an that the downloads for the day had exceeded so I just flashed it via kais you just have to install kais and you can update the same and the problem I had with the UB mg1 update was that after that update I noticed that my battery life for the Samsung Galaxy S4 was reduced by about 20% and also the phone became a little bit laggy in some of the applications so I hope that this new update uh fixes those issue so let me show you how I updated via Ka so I've connected my Samsung Galaxy S4 to my computer and I opened up guys and as you can see it says the new firmware is available the current version that I'm running is mg uh 1 and uh my uh Samsung Galaxy S4 is the I 9500 uh that is Indian version and uh I'm doing this why Ka because I did not get the OTA update as I mentioned uh and again it gives you a warning and then it can take a quite a bit of time again do note that if you force this update V guys the download will be very big um with otaa uh it it should be a small update but doing it with guys actually it downloads the entire ROM that can be anywhere around 1.7 to 1.8 GB and now the process of downloading as you can see has started again it can take quite a bit of time so I'll just skip all these screens because it can take anywhere from about half an hour to 1 hour depending upon your internet connection and as you can see now it's going to start downloading it and now as you can see it's saying that preparation for the Galaxy S4 GTI 9500 firw upgrade will proceed do not disconnect the cable uh connected to the PC again I have a fairly fast internet connection so it should be done in about 20 minutes but as I said it can be anywhere about 1.7 to 1.8 gig of download so it can take quite a bit of time so the software download V guys was done and now it's actually transferring the image to the phone as you can see and again this might take about 2 3 minutes again as I mentioned it can take a lot of time because the download size is pretty big if you do it V guys and the firware has been downloaded to the phone and as you can see it's now actually installing it and it might again reboot it actually this firmware update was out from uh 18th uh uh July 2013 but uh I was waiting for it and I did not get a OTA and whenever I tried that OTA update I was getting a error message that the downloads for the day have been done hence I forced it via guys again if you have already been using this firmware update on your S4 Please share your feedback uh in the comment section uh what did it change did you see a Improvement in battery life or other responsiveness I'll highly appreciate that and now the normal process of optimizing the apps is being done it always happens after these the updates Android updates and as you can see it's the first boot after the update now let me take out the USB cable cuz it's done let's unlock the phone so this is the phone and uh let's look at the Android version now more about the device and as you can see the build number has changed now it's xw UB mg5 let's check if we have any updates any more updates and as you can see we do not have any updat so this is the latest version as of now late Samsung is pushing out a lot of software updates for the Galaxy S4 I did play with this firmware for a bit and I did notice that the free RAM available to the Galaxy S4 after a clean boot is now somewhere around 920 MB that has increased previously if I recall it was around 700 odd MB so the free Ram has been improved I hope this update also improves the battery life so if you are already using this update uh uh do share your feedback uh did it improve the battery life or any other improvements that you have seen with this update thank you this is Ranjit and I hope to see you in my next videohi there this is ranit from tech.com and actually I got one more firmware upgrade for the Samsung Galaxy S4 and if you recall on July 11th uh we did an update for the Samsung Galaxy S4 it was the UB mg1 update and now I got the UB mg5 update actually this update was leaked around 5 days ago but uh I was not getting the OT update and whenever I tried to update it uh why the phone itself uh uh it used to give an that the downloads for the day had exceeded so I just flashed it via kais you just have to install kais and you can update the same and the problem I had with the UB mg1 update was that after that update I noticed that my battery life for the Samsung Galaxy S4 was reduced by about 20% and also the phone became a little bit laggy in some of the applications so I hope that this new update uh fixes those issue so let me show you how I updated via Ka so I've connected my Samsung Galaxy S4 to my computer and I opened up guys and as you can see it says the new firmware is available the current version that I'm running is mg uh 1 and uh my uh Samsung Galaxy S4 is the I 9500 uh that is Indian version and uh I'm doing this why Ka because I did not get the OTA update as I mentioned uh and again it gives you a warning and then it can take a quite a bit of time again do note that if you force this update V guys the download will be very big um with otaa uh it it should be a small update but doing it with guys actually it downloads the entire ROM that can be anywhere around 1.7 to 1.8 GB and now the process of downloading as you can see has started again it can take quite a bit of time so I'll just skip all these screens because it can take anywhere from about half an hour to 1 hour depending upon your internet connection and as you can see now it's going to start downloading it and now as you can see it's saying that preparation for the Galaxy S4 GTI 9500 firw upgrade will proceed do not disconnect the cable uh connected to the PC again I have a fairly fast internet connection so it should be done in about 20 minutes but as I said it can be anywhere about 1.7 to 1.8 gig of download so it can take quite a bit of time so the software download V guys was done and now it's actually transferring the image to the phone as you can see and again this might take about 2 3 minutes again as I mentioned it can take a lot of time because the download size is pretty big if you do it V guys and the firware has been downloaded to the phone and as you can see it's now actually installing it and it might again reboot it actually this firmware update was out from uh 18th uh uh July 2013 but uh I was waiting for it and I did not get a OTA and whenever I tried that OTA update I was getting a error message that the downloads for the day have been done hence I forced it via guys again if you have already been using this firmware update on your S4 Please share your feedback uh in the comment section uh what did it change did you see a Improvement in battery life or other responsiveness I'll highly appreciate that and now the normal process of optimizing the apps is being done it always happens after these the updates Android updates and as you can see it's the first boot after the update now let me take out the USB cable cuz it's done let's unlock the phone so this is the phone and uh let's look at the Android version now more about the device and as you can see the build number has changed now it's xw UB mg5 let's check if we have any updates any more updates and as you can see we do not have any updat so this is the latest version as of now late Samsung is pushing out a lot of software updates for the Galaxy S4 I did play with this firmware for a bit and I did notice that the free RAM available to the Galaxy S4 after a clean boot is now somewhere around 920 MB that has increased previously if I recall it was around 700 odd MB so the free Ram has been improved I hope this update also improves the battery life so if you are already using this update uh uh do share your feedback uh did it improve the battery life or any other improvements that you have seen with this update thank you this is Ranjit and I hope to see you in my next video\n"
