**Review: Zag Cover for EPC – A Comprehensive Look**
Aaron from Solo Tech recently shared his insights on the Zag cover for the EPC device. In this detailed review, he walks viewers through the installation process and evaluates the product's performance.
The video begins with Aaron highlighting the main features of the Zag cover, which is designed to protect the EPC. He mentions that while the cover offers excellent protection, applying it can be a bit challenging due to the presence of air bubbles. Aaron advises patience and care during the application process, as removing these bubbles can be time-consuming.
Next, he examines the fit and finish of the cover. Although the overall design is impressive, he points out a minor imperfection: the cut on the button area isn't perfect. The cover slightly overlaps here, which might bother those who prefer a seamless look. Aaron suggests that for a better fit, one could either leave off this part or pre-cut it beforehand.
Aaron also emphasizes the importance of preparation before installation. He recommends removing any stickers on the device that display information like "Windows" or "Atom," as they can interfere with the cover's application. This step is crucial to ensure a smooth and bubble-free installation.
Despite these minor issues, Aaron praises the overall protection provided by the Zag cover. Once applied correctly, it offers great defense against scratches and wear, making it an excellent investment for EPC users.
In conclusion, while there are slight fit issues, the Zag cover proves to be a reliable and protective accessory for the EPC. Aaron encourages viewers to check if their specific model is available on Zag's website, ensuring compatibility before purchase. For those looking for durable protection with minimal hassle, this cover is definitely worth considering.
Thank you for watching, and we'll see you in the next video!
"WEBVTTKind: captionsLanguage: enhi this is aaron with solo tech today we're going to take a look at the zag covering for the epc now zag makes a ton of different coverings for different models of product and just want to take a look at this so we have this on an epc and you can see the reflections in it but there is some some waviness and things and it's tough to get all those bubbles out if you've ever done one of these it's it takes some time and some patience uh so we're going to take a look at it a simple covering on the back here you can see my reflection lights and that sort of thing let's go ahead and open this up now inside we'll take this out here inside it covers the uh the palm rest and the trackpad or i'm sorry not the trackpad but the the button now a couple things of note the cut of the zag on this particular application didn't seem to be perfect on the button here it overlapped a little bit and it's not a perfect fit now if you're picky you may want to leave that off the cut's just not right or pre-cut it ahead of time other than that overall is pretty nice flattened out really nice here and you just be careful not to get the liquid under here now as far as on the top the cut is pretty good it's it's a pretty pretty uh different bevels here there's one for a lip difficult to do but overall pretty good um the the cut's fairly good on there does have a little lack of coverage right here there is no coverage on the bottom and there were some stickers here on the left that generally uh show you you know its windows or atom or whatever and those those should be taken off ahead of time as ran into some problem laying this over the top of them i didn't see any warnings for that here overall the fit like i said maybe could be improved a little bit but once you have this on here the protection's great you're not gonna have to worry about scratching it or anything so you know that's the that's the zag covering the invisible shield for the epc they make it for all sorts of netbooks just basically put in your model check it out they probably have it for you this is aaron with zollotech we'll see you next timehi this is aaron with solo tech today we're going to take a look at the zag covering for the epc now zag makes a ton of different coverings for different models of product and just want to take a look at this so we have this on an epc and you can see the reflections in it but there is some some waviness and things and it's tough to get all those bubbles out if you've ever done one of these it's it takes some time and some patience uh so we're going to take a look at it a simple covering on the back here you can see my reflection lights and that sort of thing let's go ahead and open this up now inside we'll take this out here inside it covers the uh the palm rest and the trackpad or i'm sorry not the trackpad but the the button now a couple things of note the cut of the zag on this particular application didn't seem to be perfect on the button here it overlapped a little bit and it's not a perfect fit now if you're picky you may want to leave that off the cut's just not right or pre-cut it ahead of time other than that overall is pretty nice flattened out really nice here and you just be careful not to get the liquid under here now as far as on the top the cut is pretty good it's it's a pretty pretty uh different bevels here there's one for a lip difficult to do but overall pretty good um the the cut's fairly good on there does have a little lack of coverage right here there is no coverage on the bottom and there were some stickers here on the left that generally uh show you you know its windows or atom or whatever and those those should be taken off ahead of time as ran into some problem laying this over the top of them i didn't see any warnings for that here overall the fit like i said maybe could be improved a little bit but once you have this on here the protection's great you're not gonna have to worry about scratching it or anything so you know that's the that's the zag covering the invisible shield for the epc they make it for all sorts of netbooks just basically put in your model check it out they probably have it for you this is aaron with zollotech we'll see you next time\n"
