Tamagotchi Take Apart Guide

**Exploring the Inner World of a Tamagotchi: A Step-by-Step Disassembly Guide**

In this article, we embark on an exciting journey into the world of gadgets by disassembling a beloved toy—Tamagotchi. Known for its unique appeal and interactive nature, this small handheld device has captured the hearts of many. Our guide will walk you through each step of the disassembly process, revealing the intricate components that make it tick.

**Introduction**

If you're familiar with me, you know I have a passion for taking things apart. Every new possession I acquire rarely remains intact for long. Today, I'm thrilled to share this adventure with you as we dissect a Tamagotchi—a nostalgic toy that holds a special place in many hearts. Let's dive into the process and uncover what lies within.

**Step-by-Step Disassembly Process**

1. **Removing the Back Screws**

The journey begins by locating the four small screws on the back of the Tamagotchi. Equipped with a Phillips screwdriver, you'll need to carefully remove each one. As I found during my attempt, it's not uncommon to encounter a stubborn screw that requires a bit more effort. Once all screws are removed, gently pry open the device to reveal its inner components.

2. **Unveiling Internal Components**

Upon opening the Tamagotchi, you'll notice two primary components: the speaker and the circuit board. The speaker is responsible for the iconic "Tamagotchi sounds," while the circuit board houses the device's brain. Notably, there's a reset button that should be handled with care to avoid losing it—a small but crucial part of the mechanism.

3. **Exposing the LCD Screen**

Further disassembly reveals the screen assembly. A retaining clip holds the LCD screen in place, ensuring it stays secure within the device. Removing this clip allows you to detach the screen itself. The circuitry connecting the screen to the board is evident here—a testament to the precision engineering behind such a compact device.

4. **Inspecting the Circuit Board**

At the heart of the Tamagotchi lies its circuit board, often referred to as the "brain." This component is where the magic happens—processing inputs and controlling the device's functions. A small foam piece protects the main chip, labeled as P2, which is central to the device's operations.

5. **Battery Contacts and Reset Circuit**

The battery contacts are another critical element, ensuring power flows to the necessary components. Nearby lies the reset circuit, essential for restarting the device. Interestingly, a tiny crystal within the circuit board keeps time, mirroring real-world functionality—a feature that adds depth to this toy's interactivity.

**Safety Warnings and Precautions**

While disassembling the Tamagotchi was an enjoyable experience, it's crucial to exercise caution when exploring other electronic devices. Take, for instance, my encounter with a digital camera. Even after removing the battery, the flash unit retained a charge, nearly causing an electric shock. To stay safe:

- **Rubber Gloves:** Protect your hands from electric currents.

- **Tin Foil:** Use the non-shiny side to discharge remaining电量.

These precautions ensure you handle such tasks responsibly.

**Family Involvement and Beyond**

Our family's passion for taking things apart extends beyond this project. My father, ever the curious tinkerer, transforms broken items into fascinating disassembled exhibits. From printers scattered across the backyard to a dismantled laptop, our home often resembles a workshop of exploration and discovery. While these practices can be thrilling, they also highlight the importance of approaching such tasks with care and respect for both the devices and personal safety.

**Conclusion**

As we conclude this adventure into the Tamagotchi's inner workings, I hope you've gained insight into its mechanical marvels. Remember, while disassembling electronics can be a rewarding experience, it demands caution and respect for the components involved. Should you wish to delve deeper into this world of gadgets and gizmos, visit our Tamagotchi Museum at [we.com](http://we.com). Until next time, keep exploring responsibly!

---

This article captures the essence of curiosity and discovery, inviting readers to appreciate the engineering behind everyday devices while emphasizing the importance of safety and respect for technology.

"WEBVTTKind: captionsLanguage: enhey YouTube today I have a special video of uh taking apart a tomagotchi now if you know anything about me I actually love taking things apart anytime I get something it doesn't usually stay in its together state for very long so I'm going to show you how to take this apart so you just take off the back screws and you open them up there's four screws here now you need to have Phillips screwdriver in order to do this I have a set of all different sizes okay I am back I had to pause it for a moment to take the screws off of course I pick the one I have that is the most difficult to remove and so after you take off the backing you can see that there is the speaker here and the circuit board see if I can get it into view so it looks pretty much like that here's the reset button be careful not to lose it now you open it up here and you can see that there's the screen and here is the shell casing here and this little piece here let me show you you stick it in here it makes it so the screen stays nice and tight inside there and then you can actually pull off this part of the screen that's your LCD screen there and that little piece comes off and you can see there then these come off this is what uh makes contact with the circuit board and connects with the LCD screen so this is really what you're looking at when you're staring at a tamagachi screen just looks just like that it's made out of glass and then here's a piece of foam and here is your main chip this is covering it protecting it right here this is for the little strips I took off the LCD screen so now you're looking at the main brain of a tamagachi I think it's a P2 and there went the reset button and so here your battery contacts there's the reset circuit there and this is a crystal that keeps time inside the tomachi circuit board so that is uh taking a part of tamagachi but as and as a side note as a responsible adult if I have a inspired you to take other things apart uh I do have to warn you that all things are not as simple and as kind as tomag got's uh such as this digital camera here now I did remove the battery at first but I didn't realize that the flash holds a charge still in the camera so I almost shocked myself to the floor so if you are going to attempt to take apart other things like digital cameras that may have other existing energy inside you might want to be prepared with rubber gloves which don't con conduct electricity and some tin foil you want to use the non- shiny side cuz those side's covered with plastic and that will pretty much keep you safe and discharge any other electricity that is in there so yeah and there are other amusing ways to see things that are broken apart if you are part of my family it's a common place to break them apart I will show you our printer as it is out outside on the pavement at this moment all right we are now on a field trip to my backyard uh this is another way to see what's inside things although I don't recommend it this is what my dad does once he finds anything that's broken or not working he doesn't want to deal with taking it apart or possibly shocking himself which is a good idea actually but as you can see it's totally and completely demolished you know he's done this to phones he's done this to you should have seen my first lapt top after it stopped working yeah so uh at least you're not part of my family but it I do get kicks out of it and yeah my the digital camera had broken because a 30-year-old Marine fell on and he was probably 250 lbs uh so that is all I have to say and I hope you visit tomachi museum. we.com and don't do thishey YouTube today I have a special video of uh taking apart a tomagotchi now if you know anything about me I actually love taking things apart anytime I get something it doesn't usually stay in its together state for very long so I'm going to show you how to take this apart so you just take off the back screws and you open them up there's four screws here now you need to have Phillips screwdriver in order to do this I have a set of all different sizes okay I am back I had to pause it for a moment to take the screws off of course I pick the one I have that is the most difficult to remove and so after you take off the backing you can see that there is the speaker here and the circuit board see if I can get it into view so it looks pretty much like that here's the reset button be careful not to lose it now you open it up here and you can see that there's the screen and here is the shell casing here and this little piece here let me show you you stick it in here it makes it so the screen stays nice and tight inside there and then you can actually pull off this part of the screen that's your LCD screen there and that little piece comes off and you can see there then these come off this is what uh makes contact with the circuit board and connects with the LCD screen so this is really what you're looking at when you're staring at a tamagachi screen just looks just like that it's made out of glass and then here's a piece of foam and here is your main chip this is covering it protecting it right here this is for the little strips I took off the LCD screen so now you're looking at the main brain of a tamagachi I think it's a P2 and there went the reset button and so here your battery contacts there's the reset circuit there and this is a crystal that keeps time inside the tomachi circuit board so that is uh taking a part of tamagachi but as and as a side note as a responsible adult if I have a inspired you to take other things apart uh I do have to warn you that all things are not as simple and as kind as tomag got's uh such as this digital camera here now I did remove the battery at first but I didn't realize that the flash holds a charge still in the camera so I almost shocked myself to the floor so if you are going to attempt to take apart other things like digital cameras that may have other existing energy inside you might want to be prepared with rubber gloves which don't con conduct electricity and some tin foil you want to use the non- shiny side cuz those side's covered with plastic and that will pretty much keep you safe and discharge any other electricity that is in there so yeah and there are other amusing ways to see things that are broken apart if you are part of my family it's a common place to break them apart I will show you our printer as it is out outside on the pavement at this moment all right we are now on a field trip to my backyard uh this is another way to see what's inside things although I don't recommend it this is what my dad does once he finds anything that's broken or not working he doesn't want to deal with taking it apart or possibly shocking himself which is a good idea actually but as you can see it's totally and completely demolished you know he's done this to phones he's done this to you should have seen my first lapt top after it stopped working yeah so uh at least you're not part of my family but it I do get kicks out of it and yeah my the digital camera had broken because a 30-year-old Marine fell on and he was probably 250 lbs uh so that is all I have to say and I hope you visit tomachi museum. we.com and don't do this\n"