**Making a Reptile Feeder: A Step-by-Step Guide**

What's up YouTube? So today we're gonna be making a uh reptile feeder for your like on to the next step okay so next step that you need to do is you get a drill bit that's pretty small like not like huge but just like pretty small.

You can put in all the corners of where you want to put your magnet so you just screw that into your drill and then you just drill in. For the depth, you want to get about the depth of the magnet so you can like mark that off. After you've drilled in your four holes in the back, you're gonna want to get like a screwdriver or a knife or a razor blade or something.

You're gonna want to um like just push in on the lines so there can be an outline on all those lines and I'll tell you what to do next. Then after that, you're just going to want to drill in to all and like just drill through the whole box unless you have other tools to be able to carve out the inside which I don't really have so I'm just gonna drill out the inside and carve it all out and see how it works.

**Chiseling and Adding a Magnet**

You're an assassin, so after you finish chiseling and putting your magnet in which is a lot harder than I thought it would be, you so you stuff the magnet in and then you check on your whatever you're hanging it on to check to make sure it can hold. So mine wasn't really holding that well, so I think what I'm gonna have to do is well we're gonna make this a lot lighter and I'm gonna put hot glue on the back so it grips better and so it can stay more stable.

**Making Little Domes**

Since that was a lot harder I don't know, we might just make like little domes where you can put cups in them instead of doing that whole hard process again. And so we have two circles right here skill one of these drills that's probably the best with the force of it but I don't have one of those so I'm just gonna drill in right here.

**Adding Contact Cups and Making the Outer Body**

I finished drilling all the holes, it kind of looks pretty messy so I'm going to sand it up but then I'm going to add um these contact cups like the lids so this is my one of my old contact carries I'm gonna put them in there and then hot glue them in there so they stay in place and so this is where the food's gonna go. And then I'll sand it up and yeah, I'll move on to making the outer body of it okay let's do it.

**Testing and Adding a Triangle**

Um, cutting off those pieces to make it lighter so it'll stick better so I say we go test it okay so its stability is okay but I think I can make it better. So what I'm gonna do is right here I'm gonna add a little like jut out triangle thing so then when the magnet leans down it'll just lean onto that and so it won't fall off.

And I think I'm going to add hot glue on the edges of the magnets so it doesn't scratch up the glass okay let's do it. So right here this is the finished product so it just has that magnet right there little feeding dishes right there that right there and just seemingly hangs right there. It's pretty strong, I think I'll make another video to show how strong it is.

Here's just the looks at it, here's what I look like from the page, and your knee probably trim up a little bit better but this is pretty much it. Right here, this is my old turtle, and I'm just using this demonstration yep.

WEBVTTKind: captionsLanguage: enwhat's up youtube so today we're gonna be making a uh reptile edge for your like on to the next step okay so next step that you need to do is you get a drill bit that's pretty small like not like huge but just like pretty small you can put in all the corners of where you want to put your magnet so you just screw that into your drill screw that is and then you just drill in so for the depth you want to get about the depth of the magnet so you can like mark that off so after you've drilled in your four holes in the back you're gonna want to get like a screwdriver or a knife or a razor blade or something and you're gonna want to um like just like push in on the lines so there can be an outline on all those lines and i'll tell you what to do next then after that you're just going to want to drill in to all and like just drill through the whole box unless you have other tools to be able to carve out the inside which i don't really have so i'm just gonna drill out the inside and carve it all out and see how it works you're an assassin so after you finish chiseling and putting your magnet in which is a lot harder than i thought it would be you so you stuff the magnet in and then you check on your whatever you're hanging it on to check to make sure it can hold so mine wasn't really holding that well so i think what i'm gonna have to do is well we're gonna make this a lot lighter and i'm gonna put hot glue on the back so it grips better and so it can stay more stable but to the next step so right here since that was a lot harder i don't i don't know we might just make like little domes where you can put cups in them instead of doing that whole hard process again and so we have two circles right here skill one of these drills that's probably the best with the force of it but i don't have one of those so i'm just gonna drill in right here and yeah so i'm just gonna i think i'm just gonna drill in and carve it out a little bit because i don't want to make as big of a mess as i did last time that was way easier maybe do another so one so i finished drilling all the holes it kind of looks pretty messy so i'm going to sand it up but then i'm going to add um these contact uh cups like the lids so this is my one of my old contact carries i'm gonna put them in there and then hot glue them in there so they stay in place and so this is where the food's gonna go and then i'll sand it up and yeah i'll move on to making the outer body of it okay let's do it um cutting off those pieces to make it lighter so it'll stick better so i say we go test it okay so it's stability is okay but i think i can make it better so what i'm gonna do is right here i'm gonna add a little like jut out triangle thing so then when the magnet leans down it'll just lean onto that and so it won't fall off and i think i'm going to add hot glue on the edges of the magnets so it doesn't scratch up the glass okay let's do it so right here this is the finished product so it just has that magnet right there little feeding dishes right there that right there and just seemingly hangs right there it's pretty strong i think i'll make another video to show how strong it is and here's just the looks at it here's what i look like from the page and your knee probably trim up a little bit better but this is pretty much it right here this is my old turtle and i'm just using this demonstrations yepwhat's up youtube so today we're gonna be making a uh reptile edge for your like on to the next step okay so next step that you need to do is you get a drill bit that's pretty small like not like huge but just like pretty small you can put in all the corners of where you want to put your magnet so you just screw that into your drill screw that is and then you just drill in so for the depth you want to get about the depth of the magnet so you can like mark that off so after you've drilled in your four holes in the back you're gonna want to get like a screwdriver or a knife or a razor blade or something and you're gonna want to um like just like push in on the lines so there can be an outline on all those lines and i'll tell you what to do next then after that you're just going to want to drill in to all and like just drill through the whole box unless you have other tools to be able to carve out the inside which i don't really have so i'm just gonna drill out the inside and carve it all out and see how it works you're an assassin so after you finish chiseling and putting your magnet in which is a lot harder than i thought it would be you so you stuff the magnet in and then you check on your whatever you're hanging it on to check to make sure it can hold so mine wasn't really holding that well so i think what i'm gonna have to do is well we're gonna make this a lot lighter and i'm gonna put hot glue on the back so it grips better and so it can stay more stable but to the next step so right here since that was a lot harder i don't i don't know we might just make like little domes where you can put cups in them instead of doing that whole hard process again and so we have two circles right here skill one of these drills that's probably the best with the force of it but i don't have one of those so i'm just gonna drill in right here and yeah so i'm just gonna i think i'm just gonna drill in and carve it out a little bit because i don't want to make as big of a mess as i did last time that was way easier maybe do another so one so i finished drilling all the holes it kind of looks pretty messy so i'm going to sand it up but then i'm going to add um these contact uh cups like the lids so this is my one of my old contact carries i'm gonna put them in there and then hot glue them in there so they stay in place and so this is where the food's gonna go and then i'll sand it up and yeah i'll move on to making the outer body of it okay let's do it um cutting off those pieces to make it lighter so it'll stick better so i say we go test it okay so it's stability is okay but i think i can make it better so what i'm gonna do is right here i'm gonna add a little like jut out triangle thing so then when the magnet leans down it'll just lean onto that and so it won't fall off and i think i'm going to add hot glue on the edges of the magnets so it doesn't scratch up the glass okay let's do it so right here this is the finished product so it just has that magnet right there little feeding dishes right there that right there and just seemingly hangs right there it's pretty strong i think i'll make another video to show how strong it is and here's just the looks at it here's what i look like from the page and your knee probably trim up a little bit better but this is pretty much it right here this is my old turtle and i'm just using this demonstrations yep