**Jailbreaking Your iPhone with SnowBreeze 2.3 Beta 1**

To start the jailbreaking process, open SnowBreeze 2.3 beta 1 on your desktop computer. If you don't have SnowBreeze installed yet, I may add a link to the newer version of SnowBreeze in the description below. Don't worry about this; it will appear after you run SnowBreeze and make sure you have your 4.3 firmware also, as well as links to all of these files that you need.

Go ahead and run SnowBreeze; it should automatically run as administrator, so click "OK" and close the credits. You'll see some warnings again, but I found it works great, so I would recommend it. If you're not into the risk and just want to keep your device safe, maybe you don't want to do this. But I'm going to go ahead and click "Next" and "Yes" anyway. Now, I'll browse for my firmware; you can drag it in, and it will identify it.

For this example, we're using an iPod Touch for Gen 4. Click "Next", select "Expert Mode", then "Build IPSW", and finally "Next". Note that the game Pac-Man won't work in this beta version, as I found it to be a white screen with no gameplay. It may take around 10 minutes to load.

SnowBreeze has finished now; we're going to make sure our device is plugged in and go ahead and click "OK". We'll put it into DFU mode by turning off the device and holding both the Power button and Home button for a few seconds, then releasing the Power button while keeping the Home button pressed until SnowBreeze recognizes the device. After a brief moment, you should see a lime rain animation, indicating that the device is now in DFU mode.

You'll receive a popup asking if you're ready to proceed; click "OK" to continue. Wait for it to clean up and close SnowBreeze. Your device will go black; open iTunes and hit shift on your keyboard while restoring the SnowBreeze IPSW from your device. Click "Restore" when prompted, as this may take about 10 minutes without any errors.

After completing the restore process, my iPod Touch has just finished booting after the customer store, and we can now see Cydia on our Springboard. However, if you try to open it, it will crash because we haven't run our tether boot utility yet. Go ahead and close iTunes; you'll see a new folder called "I Booty" for 4.3 on your desktop. Open it up inside, and select your device when prompted.

Selecting the device will ask if you want to put it into DFU mode; click "Start". It won't take long, as I Booty will begin exploiting in a few seconds. There we go! The screen will flash with lime rain again, indicating that the device is now booting up normally.

A real quick note: since every time your device reboots or the battery dies, the files are reset, you'll need to run I Booty every time. This is not a problem for experienced jailbreakers but may be frustrating for those new to this process.

Finally, go ahead and slide to unlock your iPhone; now Cydia will be working perfectly fine, even though it hasn't been set up yet yet. Thank you for watching this video guys!

"WEBVTTKind: captionsLanguage: enwhat's up everybody this is everything Apple Pro and I have some great news for you guys I hate snow has just released his beta version of snow Breeze that will jailbreak iOS 4.3 now I've tried it on several devices and it actually works really good even though it hasn't been released to the public now it is Semite tethered though so if you turn your device off or the battery dies it will boot up normally it's just that cyia or any of your apps will not work meaning you have to connect it to your computer and run a tethered boot utility in order to boot it properly the devices that are supported by this Semite tether jailbreak are the iPhone 4 the 3Gs the 3Gs old boot ROM which is actually untethered so you don't have to connect it to the computer to boot it the iPod Touch fourth and third gen devices now mobile substrate does not work meaning that many apps in Cydia will not be compatible and this isn't a complete jailbreak it's it's been rushed and it's a beta firmare as I said so you're kind of taking a risk although it does work great and if there's an annotation up here guys please click on it you'll be doing yourself a big favor because in the future I may or will release the untethered 4.3 jailbreak video and you'll definitely want to go see that if you have an iPhone 4 or a 3Gs please do not update if you rely on an unlock or are waiting for one because there are no guarantees that 4.3 will even have an unlock faster than 4.2.1 and if you are very impatient and you don't care about an unlock this will preserve your baseband so a future unlock may work on 4.3 and that baseband but there are no guarantees so I would just recommend staying on 4.2.1 with your iPhone right now and not risking anything in the future okay so let's begin now on my desktop I have snowbreeze 2.3 beta 1 and I may add a link to the newer version of snow breze if it comes out and don't worry about this this will appear after you run snow breze and make sure you have your 4.3 firmware also and links will be in the description there will be one link to my site where you'll find a more in-depth guide and links to all of these files that you need okay so go ahead and run snow breze it should automatically run as administrator and click okay and close credits so it'll give you some warnings again this is beta but I found it works great so I kind of would recommend it but if you're if you're not into the risk and you just want to keep your device safe that maybe you don't want to do this but I'm going to go ahead and click next and yes and now I'm just going to browse for my firmware you can drag it in and it'll identify it for a bit okay so I have an iPod Touch for Gen and I'll just click next and expert mode next and click on build ipsw and next now you can play Pac-Man but I found it doesn't work it's just a white screen and it'll take a bit maybe 10 minutes so I'll be right back all right so snow Breeze has finished now we're going to make sure our device is plugged in and go ahead and click okay and we're going to be putting it into dfu mode so get ready now we're just going to turn it off and okay okay so I'm pretty sure all of you guys know how to do this but I'm just going to begin following the directions anyway so hold power button or prepare to hold it in three two one then hold home and power for 10 9 8 7 6 5 4 3 2 one now you're going to let go of the power button and keep holding the home button until snow Breeze recognizes your device okay all right so here we see it's exploding with lime rain and it'll only take a second and there you go you get this popup so you're good to go and you can click okay wait for it to clean up a bit and okay so you can go ahead and close snow Breeze and your device should be black open up iTunes and now we will hit shift on our keyboard and restore and select the snow Breeze in your device ipsw okay and click restore so now your device will begin to restore it'll take about 10 minutes and you shouldn't get any errors guys so this will only take a bit and I'll be right back okay so my iPod Touch has just finished booting after the customer store and we will now see Cydia on our springboard and if you try to open it it'll just crash and that's because we haven't run our tether boot utility yet so go ahead and close iTunes and you'll see a new folder called I booty for 4.3 on your desktop open it up and inside open up I booty. exe and select your device and when you click Start It'll ask you to put it into dfu mode and I'm just going to do that real quick uh 10 seconds power and home and then let go of power and keep holding the home button it won't take long and I booty will begin exploiting in just a second there we go now it's exploding with lime rain and it won't take too long your screen will Flash and that's perfectly normal it'll say booting up there and now your device is just booting up like normal guys I have been getting this screen a lot connect to iTunes when trying to boot it tethered if you get this just put it into dfu mode right on the screen while running I booty and it'll boot just like it should guys one real quick note you will have to run I booty every time you boot your iPod or iPhone off or your battery dies because every time you reboot it the files are reset so you'll have to do that in order to get Cydia and all of its apps working properly so make sure to save I boooty on your desktop there we go so go ahead and slide to unlock and now CYO will be working perfectly fine it's just hasn't been set up yet so thanks for watching this video guys this has been how to jailbreak your I device Tethered on 4.3 now take a note this is a beta video again I will have a link somewhere up here when a newer version comes out but this is temporary so I really hope this works for you guys don't forget to comment rate and subsscribewhat's up everybody this is everything Apple Pro and I have some great news for you guys I hate snow has just released his beta version of snow Breeze that will jailbreak iOS 4.3 now I've tried it on several devices and it actually works really good even though it hasn't been released to the public now it is Semite tethered though so if you turn your device off or the battery dies it will boot up normally it's just that cyia or any of your apps will not work meaning you have to connect it to your computer and run a tethered boot utility in order to boot it properly the devices that are supported by this Semite tether jailbreak are the iPhone 4 the 3Gs the 3Gs old boot ROM which is actually untethered so you don't have to connect it to the computer to boot it the iPod Touch fourth and third gen devices now mobile substrate does not work meaning that many apps in Cydia will not be compatible and this isn't a complete jailbreak it's it's been rushed and it's a beta firmare as I said so you're kind of taking a risk although it does work great and if there's an annotation up here guys please click on it you'll be doing yourself a big favor because in the future I may or will release the untethered 4.3 jailbreak video and you'll definitely want to go see that if you have an iPhone 4 or a 3Gs please do not update if you rely on an unlock or are waiting for one because there are no guarantees that 4.3 will even have an unlock faster than 4.2.1 and if you are very impatient and you don't care about an unlock this will preserve your baseband so a future unlock may work on 4.3 and that baseband but there are no guarantees so I would just recommend staying on 4.2.1 with your iPhone right now and not risking anything in the future okay so let's begin now on my desktop I have snowbreeze 2.3 beta 1 and I may add a link to the newer version of snow breze if it comes out and don't worry about this this will appear after you run snow breze and make sure you have your 4.3 firmware also and links will be in the description there will be one link to my site where you'll find a more in-depth guide and links to all of these files that you need okay so go ahead and run snow breze it should automatically run as administrator and click okay and close credits so it'll give you some warnings again this is beta but I found it works great so I kind of would recommend it but if you're if you're not into the risk and you just want to keep your device safe that maybe you don't want to do this but I'm going to go ahead and click next and yes and now I'm just going to browse for my firmware you can drag it in and it'll identify it for a bit okay so I have an iPod Touch for Gen and I'll just click next and expert mode next and click on build ipsw and next now you can play Pac-Man but I found it doesn't work it's just a white screen and it'll take a bit maybe 10 minutes so I'll be right back all right so snow Breeze has finished now we're going to make sure our device is plugged in and go ahead and click okay and we're going to be putting it into dfu mode so get ready now we're just going to turn it off and okay okay so I'm pretty sure all of you guys know how to do this but I'm just going to begin following the directions anyway so hold power button or prepare to hold it in three two one then hold home and power for 10 9 8 7 6 5 4 3 2 one now you're going to let go of the power button and keep holding the home button until snow Breeze recognizes your device okay all right so here we see it's exploding with lime rain and it'll only take a second and there you go you get this popup so you're good to go and you can click okay wait for it to clean up a bit and okay so you can go ahead and close snow Breeze and your device should be black open up iTunes and now we will hit shift on our keyboard and restore and select the snow Breeze in your device ipsw okay and click restore so now your device will begin to restore it'll take about 10 minutes and you shouldn't get any errors guys so this will only take a bit and I'll be right back okay so my iPod Touch has just finished booting after the customer store and we will now see Cydia on our springboard and if you try to open it it'll just crash and that's because we haven't run our tether boot utility yet so go ahead and close iTunes and you'll see a new folder called I booty for 4.3 on your desktop open it up and inside open up I booty. exe and select your device and when you click Start It'll ask you to put it into dfu mode and I'm just going to do that real quick uh 10 seconds power and home and then let go of power and keep holding the home button it won't take long and I booty will begin exploiting in just a second there we go now it's exploding with lime rain and it won't take too long your screen will Flash and that's perfectly normal it'll say booting up there and now your device is just booting up like normal guys I have been getting this screen a lot connect to iTunes when trying to boot it tethered if you get this just put it into dfu mode right on the screen while running I booty and it'll boot just like it should guys one real quick note you will have to run I booty every time you boot your iPod or iPhone off or your battery dies because every time you reboot it the files are reset so you'll have to do that in order to get Cydia and all of its apps working properly so make sure to save I boooty on your desktop there we go so go ahead and slide to unlock and now CYO will be working perfectly fine it's just hasn't been set up yet so thanks for watching this video guys this has been how to jailbreak your I device Tethered on 4.3 now take a note this is a beta video again I will have a link somewhere up here when a newer version comes out but this is temporary so I really hope this works for you guys don't forget to comment rate and subsscribe\n"