JayzTwoCents vs Barnacules... PC Build Race

**The Future Bill: A Competition of Speed and Style**

The stage is set for the ultimate showdown between Jerry and Nick, two tech enthusiasts vying for the top spot in a competition that will determine who reigns supreme. The event, dubbed "The Future Bill," has been years in the making, with both competitors having spent countless hours perfecting their builds. As we gather to witness the culmination of their efforts, one thing is clear: this is not just about speed; it's also about style.

**Speed: A Matter of Priority**

For Jerry, speed was always at the top of his priority list. "I need only alright," he said with a hint of defiance, implying that while speed was essential, other factors were equally important to him. Nick, on the other hand, seemed less focused on speed, opting for a more measured approach that prioritized cleanliness and attention to detail. As we take a closer look at their respective builds, it becomes clear that this decision will have far-reaching consequences.

**Cleanliness: A Crucial Component**

One of the most striking aspects of Nick's build is its sheer cleanliness. "I think you got me hands I don't even think we need to ask the audience," he quipped, a nod to the fact that his system was so well-organized and tidy. Jerry, meanwhile, seemed less concerned with aesthetics, opting for a more utilitarian approach that prioritized functionality over form.

**Style: A Battle of Wits**

As the competition progressed, it became clear that style was going to be the deciding factor. Nick's exhaust system, designed to blow hot air back at his opponent, was a bold move that would either pay off or prove disastrous. Jerry, meanwhile, had opted for a more conservative approach, relying on his speed and reliability to carry him through the competition.

**The Audience Weighs In**

As we take to the stage to announce the winner of the style competition, the audience is asked to cast their votes via the straw poll. The results are in, and it's clear that Jerry's clean build has won over the hearts of our viewers. But Nick is not one to concede defeat easily, and his comments on social media have been met with a mix of humor and respect.

**The Verdict: A New Challenger**

As we prepare to announce the winner of The Future Bill, there's no shortage of speculation about who will take home the coveted title. Will it be Jerry, whose speed and reliability earned him a narrow victory? Or Nick, whose bold approach to style has won over the hearts of our audience? One thing is certain: this competition has been a wild ride, and we can't wait to see what the future holds for these two tech titans.

**The Aftermath**

In the aftermath of the competition, there's no shortage of questions about who would have come out on top if one key factor had been different. What if Jerry had opted for more aggressive cooling? Or Nick had chosen a different RAM configuration? The possibilities are endless, and our experts weigh in on what could have been.

**A New Era of Competition**

As we look to the future, it's clear that The Future Bill has set a new standard for tech competitions. Will this be the start of a new era of innovation and creativity? Only time will tell, but one thing is certain: Jerry and Nick have raised the bar, and their builds will be remembered for years to come.

**The Building Process**

In a departure from the norm, our team decided to take a closer look at the building process itself. What drives someone to create such an intricate system? How do they overcome obstacles and stay focused on their goals? The answer, as always, lies in the details.

**A Special Feature: Fiber Optic Lights**

As we took a closer look at Nick's build, one feature stood out above the rest: his fiber optic lighting system. While not the most conventional approach, this innovative solution added a touch of elegance to an otherwise utilitarian build. But was it enough to sway the judges' decision? Only time will tell.

**A Few Words from the Competitors**

As we take a break from the action, we caught up with Jerry and Nick to get their take on the competition. "I would smoke being in this competition," Jerry said with a grin, while Nick was more measured in his praise for his opponent's skills. "I'm just glad I could bring my own unique style to the table."

**A Message from the Host**

As we wrap up The Future Bill, our host took a moment to thank our audience and competitors alike. "It's been an absolute blast," he said with a smile. "I hope you guys have enjoyed this competition as much as I have." And as we look to the future, it's clear that there are plenty more exciting developments on the horizon.

**The Road Ahead**

As we bid farewell to The Future Bill, our team can't help but wonder what the future holds for these two tech titans. Will they continue to push the boundaries of innovation and creativity? Only time will tell, but one thing is certain: their builds will be remembered for years to come.

**The Final Verdict**

And so, dear readers, the verdict is in. The winner of The Future Bill is... Jerry! Congratulations to our champion on his well-deserved victory. But don't count Nick out just yet – he's already planning his next move, and we can't wait to see what he comes up with.

**A New Challenger Emerges**

As we look to the future, it's clear that a new challenger is emerging in the tech world. With The Future Bill set as the benchmark for innovation and creativity, our team can't help but wonder who will be next to take on the challenge.

**The Legacy Lives On**

And so, dear readers, The Future Bill comes to an end, but its legacy lives on. We're already looking forward to the next installment of this epic competition, and we know that it's going to be bigger and better than ever before. Stay tuned for more updates from the world of tech, and remember: in a world where innovation is key, only the best will do.

**A Final Word**

As we close out The Future Bill, our team would like to extend a heartfelt thank you to all of our competitors, sponsors, and audience members alike. It's been an absolute blast, and we can't wait to see what the future holds for this talented group of tech enthusiasts.

"WEBVTTKind: captionsLanguage: enwhat's up everyone Jays two cents here and I've got two computers I've got a build because we got PDX land coming up in November and you guys are going make sure you guys to come and say hi a fractal design is sponsoring this trip we're doing a road trip it's gonna be a lot of fun heading up there so perhaps with Josh Nick and myself are gonna be spending two days in a car each way that's gonna be crazy but anyway hi guys I got two systems to build here and I thought you know what we'd have some fun with this so those are certain somebody visiting right now and once you say hi hi so I had a good idea I said why don't we have a build off right because I've got two nearly identical systems I've gotta build so we were always talking jumps back and forth about who's better at this and that and I figured let's build a computer and see you can do it faster but then I thought you know what that's just boring I do it all the time I'm gonna beat you in speed yeah they're like six years since I've built one but then I thought let's do some bonus factors right so there's a knee cleanliness yeah neatness of wires and stuff because anyone can just shoehorn parts in the case and call it done does my original plan and beat the timer so there's the timer factor whoever gets to BIOS first wins there's gonna be the neatness factor but then we thought just like on the cooking shows we need one bonus item and considering on the thread Ripper build we learned that the light the RGB lighting and the ricer Isle we're calling it at autozone actually works with these RGB headers on these motherboards so we each get we're gonna go to autozone right now we're gonna be picking one lighting item yes from or or item period to spice up our system and make it our own from the lighting section and that's gonna be what we're calling our flair item our pieces of flair player and so yeah I'm building Josh's computer he's building NICs I'm bringing stunt work so these turn out to be atrocities I don't have to look at it but yeah so you know we gotta go now autozone let's go take the case they just vinyl wrap it and would that be awesome well let's let's find the naked there's a chrome naked lady to be found here who put some chrome fake vents on the side of it for cooling well I'm going with the trim lady oh wow so fancy tell me this is the top of the case flat J is it a cross stop a fake air intake on the top because cooling right so because we need to add extra air cooling to mix build so they can survive PDX I think it's hot PDX land so I think we're gonna get a little bit extra cooling I was gonna grab these I think this is really gonna perk up that case because I think I gonna like that mare yeah America I get work where did this engages oh man that's gonna be functional I really do it's alright if smoke starts I just turn I unplug it that's not idea what I'm good at making sure okay good let's thinking like disco party I'm thinking party like a party in there not automotive like the whole thing's cool but I just snagged it cuz he was time out car stuff I was like what can I like snatch from the whole car idea and the voltage meter popped up I like our like one item a flyer turned and these computers aren't gonna look even remotely the same now they're gonna be very individualized agreed upon yeah here's what I got Jerry Jerry's got the back there yep so I can't wait to see the way your stern I feel like you're gonna win just because of how yeah alright so I gotta bolt a volt gauge that was a good call I completely suppose I did I mean so josh is a car guy so I'm like I kind of put a voltmeter in there right and then they I only got two items the other item I got was a 72 inch fiber optic lighting string so it's 72 inches long ones that's like what six feet no it's a month yes I get six feet yeah and so it means I could actually wrap that around the internal several times I'm just concerned about how bright it's gonna be but the graphics cars we have also have our DQ lighting on them so it was a good cause for me because I'm working on Nick's computer I wanted to make sure that I showed performance without actually having performance since he always has slow cars that look like they're fast so I decide to get him a fake hood scoop think that's gonna add some horsepower we also got him some girls here cuz I don't think I've ever seen Nick with a girl before so I figured I'd get him his first little date here and then we got 36 inches of red LEDs twins naughty and nice okay so let's run down the parts here because everything here is pretty much identical the exception of the CPU and the memory we'll talk about that in a sec but 7900 X on joshs system because you know he's sponsoring this so he gets the ten core twenty thread nick gets a seventy eight twenty X eight core 16 threads whatever that's fine yes sorry Nick you down to court I mean it could have been AMD bro josh is getting RGB Corsair memory here which is gonna tie into sort of my lighting theme so that's why what with RGB on this guy Nick's actually running the Corsair torque which is a special edition memory you'll see that when Jerry does his build the box is pretty of course we've got fractal design sponsoring this will both systems are getting a new Celsius s 24 two different cases here though we're going with the mesh if I see four fractal Josh's build and Nick is getting the focus G EVG I stepped up with some parts for us here so we've got X 299 micros that we're going to be used in both of these systems or micro ATX motherboards that fit in here we've also got I show you need to open that I can't open that because that's all part of the process there see oh it's okay you know for mine it you probably would need the help I'll do that - GTX 1080p I SCS so I'm relieved that in the package but anyway you'll see that we build to 1080i so one for each system and then each system also has EBG a 750 watt power supplies so you know you know how this works right yeah we're gonna get kind of set up here we're gonna say go and then whoever gets to buy this first wins the time element cool but we've also got the neatness and the flair factor so I'm going player factor I think it's the most important thing yeah absolutely I'll put this back now trust you not to cheat Nick you were gonna love your computer bro you're gonna love it you ready ready 3 2 1 go ha ha I'm pretty confident this cases this is builds already done this is a formality that is a lightweight case I'm impressed okay as you can see J strategy supporters to unbox everything first so also to we're not doing free boot testing on this equipment so we had to hope it works right some tells me it mine doesn't boot up those jeans just gonna jump to the conclusion that I don't know what I'm doing I fried something taking baths wow the screws are already installed on the standoffs how fancy is that for putting together something quick I'd like to point out that my CPU is already installed but we got sticky residue they got stuck on here you know a lot of people have the false assumption that I'm some kind of a super builder like I'm fast I've never had that assumption ever the audience has that but anyone that's ever built with me will tell you that I tend to hyper focus on things that are not important right like the neatness of my wire isn't right I could totally see that oh and to be clear we are not to boot these computers until they are in their final form completely put together especially since we hit the style factors race a little boy bar you right I'm like jab and get anything stuck in anything cuz im a pro guys hey J what is the m2 thermal pad haha fortunately for you that's not going to apply to it good alright now the trick with install teeth users you just drop them in the slot until they feel like they're gonna go in okay and line up the little thingamajig errs I can't oh there we go that just can only go in one way right okay don't help me there we go I see these I see the key good aha yeah so we got memory in here motherboard is ready to go let me just drop this now into the case I have lost my memory oh there it is I've actually never built in one of these cases in any of the new like a small form-factor well this is the tempered last one good now I gotta be a little bit extra careful is your glass or plastic side panel - yeah this is glass yeah no prob it's also really durable check out these memory sticks deal torque are awesome as Dominator Nick specifically requested those they're fancy I kind of feel like a case like this you know it will support standard ATX like I feel like micro ATX is the way to go we're good we're good because I'm moving they're exhausting answer them front so at two intakes and two it's sauce is what I'm doing because cooling is of the utmost importance when you're using high-end hardware like we've got here how you doing over there I'm doing great yeah my stuff's almost ready to post are you booting it just about almost there buddy I love how we take two completely separate tabs on the assembly yeah so you can't really gauge like who's winning because you could be doing the super simple stuff first and I can be doing the more complex stuff first cram them in okay one two three four five six one two three four five six I can move okay I could just ignore these standoffs being in the wrong position but I'm not gonna because Jay will tease me later if I screw this up and Jay and I have an identical set of tools do well they're not nice to go but they're the same exact tool yeah don't let me like nope that was the hot key now would give me a walking we've only got one CPU power header on this one CPU power plug now although this might cost me a little bit extra time I'm doing it the right way so I'm running to PCI Express power cables instead of one because we happen to know through a video which you guys can go check out at another time that there was a slight difference when we did make it sure I put it in the right place yeah all right so I have now got all my main wiring system so this is forced me to do things a little bit weirder than I think I would traditionally but that's okay because now not to worry about the plugs cuz I've got them all in there including my spares that I need for the lighting for our our flare factor are you having a mechanical issue here yes I am the standoffs that you're trying to remove no the ones I'm trying to put in the powder coats on the holes that didn't have standoffs pre-installed so I'm having to strip it but this is all the grip I can get on it unless you got a socket that'll fit on it okay I shouldn't be helping you here right up the case dr. thing you can use I did not see one where's the case Harbor do you have one did you dump it all up yeah that's right or either so you got it right there okay oh I shouldn't be helping you but it exists back in my day I'm a good guy you're a good guy okay well give will give jr. will give him a minute for that good guy I want to see me like five minutes think again she not even notice that this tool exists dammit that's alright it's okay I feel good I feel alright I don't I'm already sweating bullets from stress because I can already tell Oh God now I just dropped my first thing this is not good this is not going well this is not well everything's going entirely to plan now that's another video coming up it build off with a Nick he swears that he could build a computer better than me even Gerry's laughing episode 2 you haven't built a computer in four I mean my plan was just all along make you super stressed I'm over here just like sweating through everything I'm like I'm dying here I never tighten down the actual end off and there's no that's a stupid mistake I would have made anyway I don't know you see me make some pretty bad ones but that's that's his own handicap if he if it's not a I mean hey hold up your little IO shield everything nevermind we're good I have no idea where the size field goes let's just say I figured out something that are you crapping me yeah you just figured it out no has to be bolted from the underside this is the first time they've ever done this that's crap all the ones I've ever done man this EVGA why what have you done this yeah I would have been a better food this is this is very very poor indeed every single person that has ever built this is gonna encounter this problem I guarantee it okay yes no I'm trying not to Thanks second it's the other one on no problem this is where my big fat hands get anywhere see my weakness in all of this is the unboxing part I think everyone kind of expects that so we got s 24 just perfect I'm gonna mount this one on the ceiling you know it would technically fit in the front yeah that's the thing I love most about the Celsius coolers though is it has the header right there so you plug your fans into the radiator you don't worry about trying to find extra header in the crap and then you have one pjo you get in here to install for your fans and your pump so I just realized that they use the bigger screws now to hold the motherboard down not the old screws so I learned this you didn't realize anything I told you okay Jay did tell me was like Jay where all the standoffs tripped up but to my credit Jake can you please confirm that yes they did used to used to be this super tiny like the same one gets in SSDs I'm using the right screws now and Here I am already wearing about wiring look at the way I'm white we're adding all of this all right I mean this is my handicap this is I can't help myself you are a handicap a sensitive there hurts my feelings I approved one screw light for that the shake factor Jay have you ever used the shake technique to update a screw I did it earlier now here if we didn't have enough problems I have never used it all in one cooling system before well I picked to eat this is look there's this like the easies Elias series is probably like among the easiest to do because it has that built-in fan header got it ooh that's fancy yeah what if this would double as an oil cooler again oil cooler in your car there we go there we go all right so there's only one place this looks like it can be mounted in the top penis get it right here for you put yours oh boy no we're fine we got this no it's where my speed has to kick in Nick was like you look cool the cucumber flavor now I caught your potato close enough some might mistake here your speed as a power drill removing screws j-just let me walk into the exact problem dammit yeah I'm guessing that same problem you know taking off that shield you told me that shield has to stay on oh you're moving in front you notice the same thing I just noticed I ran there they won't tell Ram so so what I started to say was I actually had low profile Ram I could have just gotten grabbed off the shelf but that would have been cheating right Nick you're gonna be proud of this computer you know what this is only happening like this because we're gonna hurry yeah yeah okay okay does it remove from the bottom look on the bottom see through screws holding the drive cage yet like under the case there is I can take the drive cage I'll take miss it interferes even if when it's in look no they take the drive cage out oh hey just leave it out yeah we're not using a hard drive okay okay so I'm actually I'm gonna flip my fans around because I had them set to exhaust and once I put them on the front now they were also still exhaust so we would have been pulling air out of the front of the case and I'm doing this without removing the radiator from the front because although I was like look at me I'm using all the screws cuz I'm not cheating enough now like like well there's eight screws to remove the fans or there's four eight twelve what well I guess eight screws from the radio whatever feel like this is more like how to screw a screwdriver tutorial okay there we go again where I'm like that wire sticks out and I don't like that so I'm going to remove these screws this is this is where I always tell people this is where I've always told people like look I am NOT a speed builder I am an ad builder OCD about certain things OCD I have a TV is on the ATV builder here bro so here I am tucking wires and stuff but there is a style builds are an aspect to this I have one more concern but I think we're okay what's that oh I'm talking like the camera now yeah I have a little bit concerned about the link let's grab this card now is around the front for different stuffs do it Joe these look these SC cards are pretty badass it's like so close there's ain't no pile on a boat situation I ain't taking the fan out it actually fits because I thought about that beforehand when I ordered the parts sorry Kyle it's also why you have a motherboard the fifth tip I want to show all these wires out of the way so what i'm doing here i'm taking out my drive cage too so this is gonna be pure SSD systems for this LAN party and we don't need storage how do you I think I have to take the power supply off probe you'll get stuck Pro filters figure that out in 40 seconds so I put some kinks in that so it twists out of the way so that I can run my little strip lighting that I bought around the case without that interfering new thermal paste on there because I just had to break the seal on the factory one so we're good there and my cooler effect installed I feel like I don't know I think you're taking the easy route I feel like you should have gone for a little more skill something that takes a little more time but says I mean to win this all build us one I have to give that I have to get that props this is actually awesome because I thought at first this was not going to be functional and now it's actually functional so now I feel a little bit better about putting this really really got even got here this is espionage this against all the rules alright so I'm gonna move I'm gonna put some exhaust fans on the top otherwise you guys are all gonna mock me for years and years I just think it's good it's good standard practice no it isn't thing is I just didn't want agree with you I agree it's you I just didn't want to agree with you that's it fair enough I'm not offended are you down have some exhaust fan sir they are talking us back we're getting all the exhausts here Nick oh man my hand is shaking I've forgotten it we're on a serious Channel we got we got behave yourselves balls that does look kind of cool and and Jake functional a sec so hot air at you know I want to pull your in no there's also yeah yeah let's blow the hot air yes I'm ready to user I look so now it's a heater for the user on a cold night I feel like this is gonna become like a thing now people gonna go bye-bye like suddenly autozone is gonna be like we've got a sudden burst of sales of hood scoops all right so I've got everything wired up just like Jay at this point everything you can see is perfectly organized on my desk that's where Jays at right now yeah they're wired up just like mine publicly GP is going in after I figure out how I'm gonna wire up all of the I think the gauge is gonna go like right here the gauge has got its own little bracket thing that I can just like two-sided taped in there little voltage oh wait maybe they didn't give me a little bracket it showed a bracket on the blocks look I guess that was a separate piece no no no I gotta really come up with a creative way of putting this in there don't I yeah I know you can't right now right there right I'm thinking I can drill into the nest right and that ladies and gentlemen top fiber-optic work if you've ever wondered so it's just carries along the length of the plastic there's not gonna be too much late so it's almost feel like a waste I should have gone to LEDs hey Jerry you wanna you wanna trade front right yeah doesn't matter what oh they're LEDs coming from that side oopsies okay where's that adapter there's no pins I might have to steal some pans what don't break it well that worked directly I would rather have I'd rather throw the competition and have you cut some things need to be cut Oh okay I know why this will work it's gonna show up from another truth only it's gonna light up anything Oh y'all think we were right oh yeah I went by the picture and that was the first mistake admit I fell for Shanee picture marketing because this is not this is not gonna have a light at all stop helping in what is what are you doing excuse me excuse me finish it this I should has gone LEDs but before we go to TV excellent I like I need to redo the left campus I just I just looked at the I just looked at that what the hell what it is better than was Jay Diondra it seems like competitor Jason that's good why chose the route that has way more work at what happens when just as about si does before we decide to do mine in any way oh real okay here we go she is glowing hey let's see she posts come on baby come on baby come on girl come on okay we got some additional lighting okay come on peace sake oh hey Jim I got me this might need some troubleshooting Oh beat beat beat beat which code keyboard just lit up the USB just kicked you oh do they sometimes beep even though they'll post that was a post code yep dude I haven't seen a CMOS checksum err in a long time that's that's old-school bingo that's a good big payout although the p-side doesn't still on Jake I mean it started my goal either like wired up that's actually gonna be pretty badass I don't know if we can call that a victory though base I'm just away oh shut up this is beautiful we're gonna look how the fam got me I still wanna see it finish though with them I don't think that that fiber optic cables not work very good well drop the part just go over the meter I just want to see the meter work it's not it's not the wire this up I'm gonna be like an hour behind him at least and I don't even know where the back part of my gauge went now the part that cut the holds on oh here goes okay so he's using entirely the wrong tools for this you know all right so you got to use the right tool for the job but once I repaint once I paint that and fix I mean the holes got a little gap right there whatever I couldn't do it I mean I was like anything is simple and just make it easy and I couldn't do it I was frightened LEDs actually worked as well as they did though I I when I stuck them in there literally it was just a Hail Mary like they're not they're literally just running the border of the case side and they look pretty good but I think that intake well actually some exhaust we can't call it an intake we have to call the exhaust on top it's actually really cool it's ghetto but it's cool i think i think it's PDX lane ghetto though I think that's gonna work well there technically I'd still be fumbling around the motherboard trying to figure out the shield on it if you guys don't tell me so fair enough all right here we go when we truth while I first boot at least there you go know the voltmeter is gonna need once I paint it black and fix it it's really neat that actually needs to be like a staple in the future bill okay so here we go the builds are done Jerry you won the speed competition you need only alright but there's three factors to this there's so there is of course the speed what you want hands down because I I mean my wiring look at this I cannot know your OCD screwed you I cannot not do this and I've always told Nick this Nick is always there like oh man you would smoke being a bit speed bill that's like no I wouldn't I cannot let go of this kind of stuff I really like that this case has a shroud on the bottom though like the cover stuff that's cool baby how's it look so much neater yeah okay but the other factor is the cleanliness the cleanliness which obviates say I think you got me hands I don't even think we need to ask the audience no no it's see you cleanliness is to you yeah Blair has to go to the audience yes stay the flirt we're gonna put a straw poll in here and you guys vote and I'm very disappointed because I wanted to use this fiber optic light and it's cool and all right you can even see like some of the light come through there the problem is it doesn't it's not intense enough and I did and I didn't go with LEDs because I didn't want to go with like the normal route yeah and already grabbed LEDs already went for the cheap grab I mean but lucky I mean the case is lit it's exactly what you would expect I want to say you kind of copped out on the special like bonus feature because you just went with a couple of stick on items and a plug-in item one that you were getting ready to cut and rewire that I stopped you because I don't want you to cut up a perfectly good lighting system that we could use sort of I mean some of the LEDs burned out already but I expected the excuses Jay I fully expect because you didn't know they plug into the into the motherboard I didn't technically he did otherwise he'd still be over there Turner wired up figure out which channels red which you know I do exactly what I was gonna do but it was unnecessary I was gonna actually cut them in wire but it was the only thing I really have to show for the custom factor other than the 25 bucks that just went poof because the the the wiring thing wherever it went for the lighting also is a male plug way up there all the other ones I bought so far have been female yours worked right because I told you it would but I made the voltmeter and yeah I scratched the case right there but I'm gonna touch up this paint and I'm gonna clean this up before land PDX line so it looks good but you can see that I have a functional voltmeter functionable beater that is really cool and unique very unique so where I let the audience vote who do you guys think won the style factor because that's what it comes down to yeah I got cleanest you got speed I got an exhaust though that's supposed to be an intake yeah blowing the heat back at you it is it's I designed this for cold women this is a cold woman computer well in warm it is for Nick so we're good alright guys you guys vote down in the description box go to the straw poll who do you think won that's the the style competition it was fun glad you guys are down he's down here we're actually talking about bring a Tech Talk back to this conversation for a for a future video but yeah I think biggest time we do something again with that but anyway guys I'm gonna go thanks for watching guys subscribe to barn ecclesia barn achlys nerdgasm on youtube also he's got twitch morning coffee with barnacle eh you guys check that out salute anything you wanna say before we go no man had a blast this is fun alright bands copping out oh who's next who's you guys also do who do you think I should challenge next maybe this will become a thing I don't know you that's easy we still don't know who won this because the audience has to vote alright guys we'll see we'll see you soon so you know this sir that all X platforms have four channels of memory so he did not put in all the memory because he did not realize that there is another level of RAM to that we also are wondering why one of the RAM sticks it is showing why okay sir you need to shut down your system and populate all four of them I will put my two additional RAM spaces okay to be fair the time difference would have made a difference but I just wanted to point out that he didn't even put in he's running dual channel X 299 what a noob to be fair I don't know $2.99 really is I know it's alright alright look what's parameters new youwhat's up everyone Jays two cents here and I've got two computers I've got a build because we got PDX land coming up in November and you guys are going make sure you guys to come and say hi a fractal design is sponsoring this trip we're doing a road trip it's gonna be a lot of fun heading up there so perhaps with Josh Nick and myself are gonna be spending two days in a car each way that's gonna be crazy but anyway hi guys I got two systems to build here and I thought you know what we'd have some fun with this so those are certain somebody visiting right now and once you say hi hi so I had a good idea I said why don't we have a build off right because I've got two nearly identical systems I've gotta build so we were always talking jumps back and forth about who's better at this and that and I figured let's build a computer and see you can do it faster but then I thought you know what that's just boring I do it all the time I'm gonna beat you in speed yeah they're like six years since I've built one but then I thought let's do some bonus factors right so there's a knee cleanliness yeah neatness of wires and stuff because anyone can just shoehorn parts in the case and call it done does my original plan and beat the timer so there's the timer factor whoever gets to BIOS first wins there's gonna be the neatness factor but then we thought just like on the cooking shows we need one bonus item and considering on the thread Ripper build we learned that the light the RGB lighting and the ricer Isle we're calling it at autozone actually works with these RGB headers on these motherboards so we each get we're gonna go to autozone right now we're gonna be picking one lighting item yes from or or item period to spice up our system and make it our own from the lighting section and that's gonna be what we're calling our flair item our pieces of flair player and so yeah I'm building Josh's computer he's building NICs I'm bringing stunt work so these turn out to be atrocities I don't have to look at it but yeah so you know we gotta go now autozone let's go take the case they just vinyl wrap it and would that be awesome well let's let's find the naked there's a chrome naked lady to be found here who put some chrome fake vents on the side of it for cooling well I'm going with the trim lady oh wow so fancy tell me this is the top of the case flat J is it a cross stop a fake air intake on the top because cooling right so because we need to add extra air cooling to mix build so they can survive PDX I think it's hot PDX land so I think we're gonna get a little bit extra cooling I was gonna grab these I think this is really gonna perk up that case because I think I gonna like that mare yeah America I get work where did this engages oh man that's gonna be functional I really do it's alright if smoke starts I just turn I unplug it that's not idea what I'm good at making sure okay good let's thinking like disco party I'm thinking party like a party in there not automotive like the whole thing's cool but I just snagged it cuz he was time out car stuff I was like what can I like snatch from the whole car idea and the voltage meter popped up I like our like one item a flyer turned and these computers aren't gonna look even remotely the same now they're gonna be very individualized agreed upon yeah here's what I got Jerry Jerry's got the back there yep so I can't wait to see the way your stern I feel like you're gonna win just because of how yeah alright so I gotta bolt a volt gauge that was a good call I completely suppose I did I mean so josh is a car guy so I'm like I kind of put a voltmeter in there right and then they I only got two items the other item I got was a 72 inch fiber optic lighting string so it's 72 inches long ones that's like what six feet no it's a month yes I get six feet yeah and so it means I could actually wrap that around the internal several times I'm just concerned about how bright it's gonna be but the graphics cars we have also have our DQ lighting on them so it was a good cause for me because I'm working on Nick's computer I wanted to make sure that I showed performance without actually having performance since he always has slow cars that look like they're fast so I decide to get him a fake hood scoop think that's gonna add some horsepower we also got him some girls here cuz I don't think I've ever seen Nick with a girl before so I figured I'd get him his first little date here and then we got 36 inches of red LEDs twins naughty and nice okay so let's run down the parts here because everything here is pretty much identical the exception of the CPU and the memory we'll talk about that in a sec but 7900 X on joshs system because you know he's sponsoring this so he gets the ten core twenty thread nick gets a seventy eight twenty X eight core 16 threads whatever that's fine yes sorry Nick you down to court I mean it could have been AMD bro josh is getting RGB Corsair memory here which is gonna tie into sort of my lighting theme so that's why what with RGB on this guy Nick's actually running the Corsair torque which is a special edition memory you'll see that when Jerry does his build the box is pretty of course we've got fractal design sponsoring this will both systems are getting a new Celsius s 24 two different cases here though we're going with the mesh if I see four fractal Josh's build and Nick is getting the focus G EVG I stepped up with some parts for us here so we've got X 299 micros that we're going to be used in both of these systems or micro ATX motherboards that fit in here we've also got I show you need to open that I can't open that because that's all part of the process there see oh it's okay you know for mine it you probably would need the help I'll do that - GTX 1080p I SCS so I'm relieved that in the package but anyway you'll see that we build to 1080i so one for each system and then each system also has EBG a 750 watt power supplies so you know you know how this works right yeah we're gonna get kind of set up here we're gonna say go and then whoever gets to buy this first wins the time element cool but we've also got the neatness and the flair factor so I'm going player factor I think it's the most important thing yeah absolutely I'll put this back now trust you not to cheat Nick you were gonna love your computer bro you're gonna love it you ready ready 3 2 1 go ha ha I'm pretty confident this cases this is builds already done this is a formality that is a lightweight case I'm impressed okay as you can see J strategy supporters to unbox everything first so also to we're not doing free boot testing on this equipment so we had to hope it works right some tells me it mine doesn't boot up those jeans just gonna jump to the conclusion that I don't know what I'm doing I fried something taking baths wow the screws are already installed on the standoffs how fancy is that for putting together something quick I'd like to point out that my CPU is already installed but we got sticky residue they got stuck on here you know a lot of people have the false assumption that I'm some kind of a super builder like I'm fast I've never had that assumption ever the audience has that but anyone that's ever built with me will tell you that I tend to hyper focus on things that are not important right like the neatness of my wire isn't right I could totally see that oh and to be clear we are not to boot these computers until they are in their final form completely put together especially since we hit the style factors race a little boy bar you right I'm like jab and get anything stuck in anything cuz im a pro guys hey J what is the m2 thermal pad haha fortunately for you that's not going to apply to it good alright now the trick with install teeth users you just drop them in the slot until they feel like they're gonna go in okay and line up the little thingamajig errs I can't oh there we go that just can only go in one way right okay don't help me there we go I see these I see the key good aha yeah so we got memory in here motherboard is ready to go let me just drop this now into the case I have lost my memory oh there it is I've actually never built in one of these cases in any of the new like a small form-factor well this is the tempered last one good now I gotta be a little bit extra careful is your glass or plastic side panel - yeah this is glass yeah no prob it's also really durable check out these memory sticks deal torque are awesome as Dominator Nick specifically requested those they're fancy I kind of feel like a case like this you know it will support standard ATX like I feel like micro ATX is the way to go we're good we're good because I'm moving they're exhausting answer them front so at two intakes and two it's sauce is what I'm doing because cooling is of the utmost importance when you're using high-end hardware like we've got here how you doing over there I'm doing great yeah my stuff's almost ready to post are you booting it just about almost there buddy I love how we take two completely separate tabs on the assembly yeah so you can't really gauge like who's winning because you could be doing the super simple stuff first and I can be doing the more complex stuff first cram them in okay one two three four five six one two three four five six I can move okay I could just ignore these standoffs being in the wrong position but I'm not gonna because Jay will tease me later if I screw this up and Jay and I have an identical set of tools do well they're not nice to go but they're the same exact tool yeah don't let me like nope that was the hot key now would give me a walking we've only got one CPU power header on this one CPU power plug now although this might cost me a little bit extra time I'm doing it the right way so I'm running to PCI Express power cables instead of one because we happen to know through a video which you guys can go check out at another time that there was a slight difference when we did make it sure I put it in the right place yeah all right so I have now got all my main wiring system so this is forced me to do things a little bit weirder than I think I would traditionally but that's okay because now not to worry about the plugs cuz I've got them all in there including my spares that I need for the lighting for our our flare factor are you having a mechanical issue here yes I am the standoffs that you're trying to remove no the ones I'm trying to put in the powder coats on the holes that didn't have standoffs pre-installed so I'm having to strip it but this is all the grip I can get on it unless you got a socket that'll fit on it okay I shouldn't be helping you here right up the case dr. thing you can use I did not see one where's the case Harbor do you have one did you dump it all up yeah that's right or either so you got it right there okay oh I shouldn't be helping you but it exists back in my day I'm a good guy you're a good guy okay well give will give jr. will give him a minute for that good guy I want to see me like five minutes think again she not even notice that this tool exists dammit that's alright it's okay I feel good I feel alright I don't I'm already sweating bullets from stress because I can already tell Oh God now I just dropped my first thing this is not good this is not going well this is not well everything's going entirely to plan now that's another video coming up it build off with a Nick he swears that he could build a computer better than me even Gerry's laughing episode 2 you haven't built a computer in four I mean my plan was just all along make you super stressed I'm over here just like sweating through everything I'm like I'm dying here I never tighten down the actual end off and there's no that's a stupid mistake I would have made anyway I don't know you see me make some pretty bad ones but that's that's his own handicap if he if it's not a I mean hey hold up your little IO shield everything nevermind we're good I have no idea where the size field goes let's just say I figured out something that are you crapping me yeah you just figured it out no has to be bolted from the underside this is the first time they've ever done this that's crap all the ones I've ever done man this EVGA why what have you done this yeah I would have been a better food this is this is very very poor indeed every single person that has ever built this is gonna encounter this problem I guarantee it okay yes no I'm trying not to Thanks second it's the other one on no problem this is where my big fat hands get anywhere see my weakness in all of this is the unboxing part I think everyone kind of expects that so we got s 24 just perfect I'm gonna mount this one on the ceiling you know it would technically fit in the front yeah that's the thing I love most about the Celsius coolers though is it has the header right there so you plug your fans into the radiator you don't worry about trying to find extra header in the crap and then you have one pjo you get in here to install for your fans and your pump so I just realized that they use the bigger screws now to hold the motherboard down not the old screws so I learned this you didn't realize anything I told you okay Jay did tell me was like Jay where all the standoffs tripped up but to my credit Jake can you please confirm that yes they did used to used to be this super tiny like the same one gets in SSDs I'm using the right screws now and Here I am already wearing about wiring look at the way I'm white we're adding all of this all right I mean this is my handicap this is I can't help myself you are a handicap a sensitive there hurts my feelings I approved one screw light for that the shake factor Jay have you ever used the shake technique to update a screw I did it earlier now here if we didn't have enough problems I have never used it all in one cooling system before well I picked to eat this is look there's this like the easies Elias series is probably like among the easiest to do because it has that built-in fan header got it ooh that's fancy yeah what if this would double as an oil cooler again oil cooler in your car there we go there we go all right so there's only one place this looks like it can be mounted in the top penis get it right here for you put yours oh boy no we're fine we got this no it's where my speed has to kick in Nick was like you look cool the cucumber flavor now I caught your potato close enough some might mistake here your speed as a power drill removing screws j-just let me walk into the exact problem dammit yeah I'm guessing that same problem you know taking off that shield you told me that shield has to stay on oh you're moving in front you notice the same thing I just noticed I ran there they won't tell Ram so so what I started to say was I actually had low profile Ram I could have just gotten grabbed off the shelf but that would have been cheating right Nick you're gonna be proud of this computer you know what this is only happening like this because we're gonna hurry yeah yeah okay okay does it remove from the bottom look on the bottom see through screws holding the drive cage yet like under the case there is I can take the drive cage I'll take miss it interferes even if when it's in look no they take the drive cage out oh hey just leave it out yeah we're not using a hard drive okay okay so I'm actually I'm gonna flip my fans around because I had them set to exhaust and once I put them on the front now they were also still exhaust so we would have been pulling air out of the front of the case and I'm doing this without removing the radiator from the front because although I was like look at me I'm using all the screws cuz I'm not cheating enough now like like well there's eight screws to remove the fans or there's four eight twelve what well I guess eight screws from the radio whatever feel like this is more like how to screw a screwdriver tutorial okay there we go again where I'm like that wire sticks out and I don't like that so I'm going to remove these screws this is this is where I always tell people this is where I've always told people like look I am NOT a speed builder I am an ad builder OCD about certain things OCD I have a TV is on the ATV builder here bro so here I am tucking wires and stuff but there is a style builds are an aspect to this I have one more concern but I think we're okay what's that oh I'm talking like the camera now yeah I have a little bit concerned about the link let's grab this card now is around the front for different stuffs do it Joe these look these SC cards are pretty badass it's like so close there's ain't no pile on a boat situation I ain't taking the fan out it actually fits because I thought about that beforehand when I ordered the parts sorry Kyle it's also why you have a motherboard the fifth tip I want to show all these wires out of the way so what i'm doing here i'm taking out my drive cage too so this is gonna be pure SSD systems for this LAN party and we don't need storage how do you I think I have to take the power supply off probe you'll get stuck Pro filters figure that out in 40 seconds so I put some kinks in that so it twists out of the way so that I can run my little strip lighting that I bought around the case without that interfering new thermal paste on there because I just had to break the seal on the factory one so we're good there and my cooler effect installed I feel like I don't know I think you're taking the easy route I feel like you should have gone for a little more skill something that takes a little more time but says I mean to win this all build us one I have to give that I have to get that props this is actually awesome because I thought at first this was not going to be functional and now it's actually functional so now I feel a little bit better about putting this really really got even got here this is espionage this against all the rules alright so I'm gonna move I'm gonna put some exhaust fans on the top otherwise you guys are all gonna mock me for years and years I just think it's good it's good standard practice no it isn't thing is I just didn't want agree with you I agree it's you I just didn't want to agree with you that's it fair enough I'm not offended are you down have some exhaust fan sir they are talking us back we're getting all the exhausts here Nick oh man my hand is shaking I've forgotten it we're on a serious Channel we got we got behave yourselves balls that does look kind of cool and and Jake functional a sec so hot air at you know I want to pull your in no there's also yeah yeah let's blow the hot air yes I'm ready to user I look so now it's a heater for the user on a cold night I feel like this is gonna become like a thing now people gonna go bye-bye like suddenly autozone is gonna be like we've got a sudden burst of sales of hood scoops all right so I've got everything wired up just like Jay at this point everything you can see is perfectly organized on my desk that's where Jays at right now yeah they're wired up just like mine publicly GP is going in after I figure out how I'm gonna wire up all of the I think the gauge is gonna go like right here the gauge has got its own little bracket thing that I can just like two-sided taped in there little voltage oh wait maybe they didn't give me a little bracket it showed a bracket on the blocks look I guess that was a separate piece no no no I gotta really come up with a creative way of putting this in there don't I yeah I know you can't right now right there right I'm thinking I can drill into the nest right and that ladies and gentlemen top fiber-optic work if you've ever wondered so it's just carries along the length of the plastic there's not gonna be too much late so it's almost feel like a waste I should have gone to LEDs hey Jerry you wanna you wanna trade front right yeah doesn't matter what oh they're LEDs coming from that side oopsies okay where's that adapter there's no pins I might have to steal some pans what don't break it well that worked directly I would rather have I'd rather throw the competition and have you cut some things need to be cut Oh okay I know why this will work it's gonna show up from another truth only it's gonna light up anything Oh y'all think we were right oh yeah I went by the picture and that was the first mistake admit I fell for Shanee picture marketing because this is not this is not gonna have a light at all stop helping in what is what are you doing excuse me excuse me finish it this I should has gone LEDs but before we go to TV excellent I like I need to redo the left campus I just I just looked at the I just looked at that what the hell what it is better than was Jay Diondra it seems like competitor Jason that's good why chose the route that has way more work at what happens when just as about si does before we decide to do mine in any way oh real okay here we go she is glowing hey let's see she posts come on baby come on baby come on girl come on okay we got some additional lighting okay come on peace sake oh hey Jim I got me this might need some troubleshooting Oh beat beat beat beat which code keyboard just lit up the USB just kicked you oh do they sometimes beep even though they'll post that was a post code yep dude I haven't seen a CMOS checksum err in a long time that's that's old-school bingo that's a good big payout although the p-side doesn't still on Jake I mean it started my goal either like wired up that's actually gonna be pretty badass I don't know if we can call that a victory though base I'm just away oh shut up this is beautiful we're gonna look how the fam got me I still wanna see it finish though with them I don't think that that fiber optic cables not work very good well drop the part just go over the meter I just want to see the meter work it's not it's not the wire this up I'm gonna be like an hour behind him at least and I don't even know where the back part of my gauge went now the part that cut the holds on oh here goes okay so he's using entirely the wrong tools for this you know all right so you got to use the right tool for the job but once I repaint once I paint that and fix I mean the holes got a little gap right there whatever I couldn't do it I mean I was like anything is simple and just make it easy and I couldn't do it I was frightened LEDs actually worked as well as they did though I I when I stuck them in there literally it was just a Hail Mary like they're not they're literally just running the border of the case side and they look pretty good but I think that intake well actually some exhaust we can't call it an intake we have to call the exhaust on top it's actually really cool it's ghetto but it's cool i think i think it's PDX lane ghetto though I think that's gonna work well there technically I'd still be fumbling around the motherboard trying to figure out the shield on it if you guys don't tell me so fair enough all right here we go when we truth while I first boot at least there you go know the voltmeter is gonna need once I paint it black and fix it it's really neat that actually needs to be like a staple in the future bill okay so here we go the builds are done Jerry you won the speed competition you need only alright but there's three factors to this there's so there is of course the speed what you want hands down because I I mean my wiring look at this I cannot know your OCD screwed you I cannot not do this and I've always told Nick this Nick is always there like oh man you would smoke being a bit speed bill that's like no I wouldn't I cannot let go of this kind of stuff I really like that this case has a shroud on the bottom though like the cover stuff that's cool baby how's it look so much neater yeah okay but the other factor is the cleanliness the cleanliness which obviates say I think you got me hands I don't even think we need to ask the audience no no it's see you cleanliness is to you yeah Blair has to go to the audience yes stay the flirt we're gonna put a straw poll in here and you guys vote and I'm very disappointed because I wanted to use this fiber optic light and it's cool and all right you can even see like some of the light come through there the problem is it doesn't it's not intense enough and I did and I didn't go with LEDs because I didn't want to go with like the normal route yeah and already grabbed LEDs already went for the cheap grab I mean but lucky I mean the case is lit it's exactly what you would expect I want to say you kind of copped out on the special like bonus feature because you just went with a couple of stick on items and a plug-in item one that you were getting ready to cut and rewire that I stopped you because I don't want you to cut up a perfectly good lighting system that we could use sort of I mean some of the LEDs burned out already but I expected the excuses Jay I fully expect because you didn't know they plug into the into the motherboard I didn't technically he did otherwise he'd still be over there Turner wired up figure out which channels red which you know I do exactly what I was gonna do but it was unnecessary I was gonna actually cut them in wire but it was the only thing I really have to show for the custom factor other than the 25 bucks that just went poof because the the the wiring thing wherever it went for the lighting also is a male plug way up there all the other ones I bought so far have been female yours worked right because I told you it would but I made the voltmeter and yeah I scratched the case right there but I'm gonna touch up this paint and I'm gonna clean this up before land PDX line so it looks good but you can see that I have a functional voltmeter functionable beater that is really cool and unique very unique so where I let the audience vote who do you guys think won the style factor because that's what it comes down to yeah I got cleanest you got speed I got an exhaust though that's supposed to be an intake yeah blowing the heat back at you it is it's I designed this for cold women this is a cold woman computer well in warm it is for Nick so we're good alright guys you guys vote down in the description box go to the straw poll who do you think won that's the the style competition it was fun glad you guys are down he's down here we're actually talking about bring a Tech Talk back to this conversation for a for a future video but yeah I think biggest time we do something again with that but anyway guys I'm gonna go thanks for watching guys subscribe to barn ecclesia barn achlys nerdgasm on youtube also he's got twitch morning coffee with barnacle eh you guys check that out salute anything you wanna say before we go no man had a blast this is fun alright bands copping out oh who's next who's you guys also do who do you think I should challenge next maybe this will become a thing I don't know you that's easy we still don't know who won this because the audience has to vote alright guys we'll see we'll see you soon so you know this sir that all X platforms have four channels of memory so he did not put in all the memory because he did not realize that there is another level of RAM to that we also are wondering why one of the RAM sticks it is showing why okay sir you need to shut down your system and populate all four of them I will put my two additional RAM spaces okay to be fair the time difference would have made a difference but I just wanted to point out that he didn't even put in he's running dual channel X 299 what a noob to be fair I don't know $2.99 really is I know it's alright alright look what's parameters new you\n"