**A Visit to Kyle's Garage**

Recently, we had the opportunity to visit Kyle's garage and check out his latest acquisition - an oil catch can for his Prius. However, things didn't quite go as planned. Kyle wanted to install the catch can in a location that would be easily accessible, but unfortunately, it was located behind the front bumper of the car, making it difficult to drain the oil once it had been installed.

To solve this problem, we decided to mount the catch can on the hatch of the Prius instead. The catch can itself is black and looks like it's been designed for durability. We're not entirely sure why Kyle wanted an oil catch can for his Prius, but we'll assume it's because he wants to be prepared in case something goes wrong with the car.

**A Care Package from Joe**

While we were exploring Kyle's garage, we received a surprise visit from Joe, who had sent us a care package. The package included veggie sticks and coke, which were greatly appreciated by everyone present. We're not sure what sparked Joe's decision to send us a care package, but we're glad he did. It's always nice to receive unexpected gifts, especially when they include delicious snacks.

**The Dino is Back**

One of the most exciting developments in Kyle's garage right now is the return of his all-wheel-drive Dino. This car has been through quite an ordeal and has come out the other side with a new set of rod bearings. We're excited to see what the future holds for this car and hope that it will be back on the road soon.

**Wago's Surgery**

Unfortunately, Wago - one of Kyle's projects - is currently not running due to some internal damage. It seems that she got hurt during a recent outing in Texas, where James decided to take her for a spin in the shop. The car didn't quite make it back without suffering some serious damage, and now it's off to surgery to get it fixed.

**The Future of Kyle's Garage**

As we look to the future, there are several projects on the horizon that promise to keep things interesting in Kyle's garage. One of the most promising is the launch of a new video series, where we'll be showing you guys more footage from our time in Texas. We're also expecting a shipment of parts and tools to arrive soon, including some custom 3D printed wrenches and ten millimeter sockets.

**The Toolbox**

Speaking of tools, Kyle has been getting into the habit of using his toolbox whenever he needs something. He recently received a shipment of new tools, including some hard drive platters that he's affectionately referred to as "little discs from a computer". We're not entirely sure what these will be used for, but we're excited to find out.

**The Road Ahead**

As we look to the future, it's clear that Kyle's garage is always on the move. With new projects and adventures on the horizon, there's never a dull moment in this garage. Whether it's the launch of a new video series or the return of an old friend, there's always something exciting happening in Kyle's world.

**The All-Wheel-Drive Honda Roof**

In a recent development, we've been told that James has been working on a project involving an all-wheel-drive Honda roof. It seems that he's trying to create something entirely new and unique, and we're excited to see what the finished product will look like. With 600 horsepower under the hood, this car promises to be quite impressive.

**The Mr2 Motor**

One of the most anticipated projects in Kyle's garage right now is the repair of his mr2 motor. We've been told that it's due for a major overhaul and we're excited to see what will come out of it. With the help of some skilled mechanics, this car promises to be back on the road soon.

**The Mr2 Aftermath**

In related news, Han Drew - another one of Kyle's projects - is currently undergoing surgery after suffering some internal damage. We'll have more information about this in a future video series.

"WEBVTTKind: captionsLanguage: enwe survived the Blizzard made it back home yeah made it back but now I got to go back yup gotta go help out Jamie and Shawn yeah there we go get that big surprise over here yeah yeah yeah gotta beat that leather what's going on guys we are back from Texas and this morning I went and picked up the block for the mr2 something I forgot to mention is that before we left to Texas I drop this thing off at the machine shop to have it board over it if they are new Pistons because you guys saw we got these new CP Pistons for the mr2 build and these are 87 and a half millimeter piston and the standard bore on a k24 is a seven millimeter so we had to bore it 20 over to fit our new Pistons before if you tried to slide one of these guys in they woulda stopped right at the skirts but as you can see now they go all the way in nice and snug the reason I went with an oversized piston is because if I were to order a stock sized piston to put in the stock bore of this block you might not always get the perfect piston to wall clearance because depending on the stock block you don't know how many miles were on this thing you don't know how worn out the stock sleeves were so the best bet is to get an oversize piston so then when the machine shop bores it over to fit the slightly bigger piston you know all your piston to wall clearances are going to be perfect and that is going to be important especially on a high horsepower build like the mr2 we don't want to have any excessive piston to wall clearance because we want to try to keep all that boost going down on top of the piston not around it and that's how we can pick up some more power so that is the reason we got oversized Pistons and they even have the spec sheet right here that the machine shop went off and for these guys it looks like they did a 35 and a half or three and a half thousands piston to wall clearance so we know those are ready to go Pistons are ready to go into the block and now I just need to get this thing assembled she'll be ready to rock you ready to start working on this thing again oh yeah you want to show them what you did already already putting her on a diet on a vegan diet no meat yes we're getting ready to do the cage in Hondo here pretty soon Emilio started to pull out all of the interior there's a lot of heavy stuff in here dude yeah like all that all that metal that was up on here like those brackets see way over a hundred pounds already that I took up yeah these things right here I don't know is he for these guys were bolted up right over here even like some random metal pieces we had to the headliner out too since the windshield was already taken out and then I'm probably gonna pull these back panels off not sure if I'm gonna put I don't think I'm gonna put the back ones on but I might keep the front ones and then I'm gonna pull the dash out and try to get the heater box and whatever it's underneath I'm not gonna use that we actually already started to take some measurements for the cage as well we're getting ready to bend the main hoop up but we need a air compressor yeah before we can do that the one outside kind of took a crap on us yeah so the shop is down on air right now and the bender runs off the air compressor so we're gonna have to wait till we get that back up and going but we're working on that and then all we need to start putting the motor together for this thing is the rod bearings right now got the main bearings chilling right here Brian already had some of those but the rod bearings are on the way should hopefully be here tomorrow yeah then we can get the block together at least because we haven't had the bottom end yeah we just got to wait on the heads to come back and those should be coming back soon so it should be getting done hopefully like what this week or something yeah so something like that I like by next week I'd say two weeks the most and I can start getting it fully assembled there's a lot of stuff we can do right now so the other cage is gonna take a while yeah you guys saw in the mr2 they take some time but we'll get her knocked out yeah once the heads get here all we have to do with that is just put our cams in it and put that together but at least we'll have the block together yep start getting there together she'll be coming a lot of work to do all right so you guys saw the title of the video and I know the secret is kind of out to some of you guys some of you already know about this but I know a lot of you guys don't so we did bring back something special with us from when we went to Texas and Jamie's truck had a hard time doing that and they had actually we had to go get rescued for it but it was a long journey back for Brent and Jamie is all we can say from Texas but it was well worth it you want to do the honors we got new trailer the Big Tex or something Texas pride new trailer - two and a half three cars on there 300 can put through see our exes we're pretty we're pretty stoked about the trailer trailer there's also just a hunk of metal on there - yeah this goes inside it's kind of cool yeah I'll make the trailer look a lot nicer and prettier when we get that thing off of the trailer but pretty stoked we got an all-wheel drive dyno we have an all-wheel drive dyno check it out for all over the world here we go we got a Mustang dyno Mustang all-wheel drive dyno appreciating guys from boost logic yeah they have some pretty they've had some pretty serious stuff on this oh this dyno seen well over like 1500 yeah for sure they've had some gnarly GTRs yeah that's never seen all 100 horsepower out of Han drew I'm pretty pumped it's pretty exciting right now we could race yeah we'll have drag races in the shop on the Dino Dino Dino drag racing we plan on just putting it next to the other one the two-wheel drive in the bay next to it very just gonna try to line up the front rollers together so when you have two cars on there we can like drop a tree or something just dyno race each other are you looking to have some fun dinah'll ins more stuff find an old power number you're gonna be able to do so much more with this oh my god now you can do Subarus GTRs yeah Honduras all-wheel-drive waggers all-wheel drive civics you can take the other roller that's awesome man yeah that's sweet yeah yone explain what happened to the truck on the way back had to drive back to Texas right after we went through a blizzard getting here trucks fine so this thing weighs about 15,000 pounds truck only had a class three hitch so and what's that rated for it not 15,000 pounds not that much he tried to make it though yeah we tried they almost did they made it about half way a little past halfway it was right after we went through it Blizzard to get back was sketchy drove 18 hours his truck was and then I got it drop got D'Amelio off and then Kyle and I got to the shop and then Jamie called and then we had a turnaround I called Steve borrowed his truck and we went back to Texas I came I was dead Brett had to go bruh had to go back to Texas to save them we met with them and helped him drive within Steve was tires a Briton still out driving Luke is hoping that's not facing the right direction anymore I think that's a little bit bowed on both sides metals buckle under there so we figured out we think it came from Amarillo it's a Dumas like that cuz Shawn hits on was driving he hit a dip when we heard the jacks hit we stopped and got a hotel because it was starting to snow real bad and it like this was a heavy load so and you had your ton of pounds equalizer hitch everything and it still bended off and when we came out the next morning I like was doing a walk-around to check everything and the hitch was like sitting almost on the ground it was a good thing we stopped that night cuz we would've just kept going not notice it until the next gas stop you no matter if that fell off oh man and now it all died no safety chains there anything then because that's what the safety chains are attached you mean the safety chains are on there right well they would but it made it against all odds it worked out we were at the when we were at the gas station we were going through a blizzard in the gas gauge was under the read past the E and then we barely make it to a gas station right when we roll up Brent starts to fill it up and then it shut off because it ran out of gas and then we had to sit there priming the pump because it's a diesel and then my truck wouldn't start up for like ten minutes house priming it though yeah that's the only reason I knew you had to do that or else we would have been stranded has that yeah the little Prime thingy the twelve Alvin if you run it out it doesn't have a little Prime thing you just gotta sit there and crank it forward that's how much that would take forever because we did that on his and it was like half an hour and then we looked it up online they're like oh you just pumped this thing really oh and then it fired right up it works for your truck yeah yeah but we made it I was so sketched and the trailer was drifting around in the blizzard oh yeah I know I was honestly worried I was like you should slow down I'm brain was hauling ass well the problem was we didn't have that like we had fuel to make it to the next stop but then the blizzard was so bad it took hours to where we needed to go so we were out running out of gas and we were in the middle of nowhere like no service or the sketch it was but we made it and the heater wasn't working and we had a hot line we had a hot wire the heater blower motor that was a mission frozen I know I was like it was a boy adventure but you know what she made it yeah boosted boys have an all-wheel drive dyno that's just real it's gonna stamp on he's gonna now he just got a dig another hole dig another hole because we want it in ground so we can just take advantage of the space we have otherwise we'll always be running around it having to work around it yeah it's so nice having any ground I know so nice well then quarks ours like it's scarier it's going in the ground yeah yeah and since we don't have a yeah landlord that says you can't dig a hole in there we're gonna have it in the ground it's gonna be awesome to me it's amazing and this time we'll use water to cut the concrete yeah yeah we have water building now so we don't get lung cancer from all the dust and there's still all kinds of dust in there literally you probably only a little bit of cement mixed up in there but there she is new all-wheel-drive Dino pretty exciting new to us yep new to us and hopefully you know Honda Roos every wacko either one breaks today in that oh yeah well I mean they should be done by the time this thing gets installed we'll have the all-wheel drive power numbers and then we can compare the numbers from this dyno to your dyno and then everyone can we can take a car off of one and just put it right on the other and then we'll just know the numbers for sure yeah everything that no one can complain yeah that we fudged our numbers and my minivan actually doesn't make 700 oh man give me a big bring on all the all-wheel drive stuff now yeah oh the Honda's are gonna be all wheel drive all the drive had just need all the drive so I really don't have too much else going on today we need that air compressor yeah whenever we can get that figured out get Honda is rollcage figured out yeah what you think just go to Home Depot and buy pick one up what happened to the one outside I didn't really say anything you don't know why I just went out and just gave up there's no I know my old shop I had the compressor outside for like years and it was fun and you guys built a little box around it too so my who knows it's just still dead well we need an air compressor but yeah we just been cleaning up some but we got some packages in the mail so these are some more fan mail that we're gonna open up real quick this bottom one says it's for everybody this one came straight to the shop and it's from prime pantry so hopefully that's some food Cletus isn't the only one getting some food alright I will open these up someone say Dino launch oh they should send pretty hard please don't die oh this is for the diamond watch did it begin I forgot about that honestly now I didn't I'm gonna forget once they die no lunch please don't die they could send pretty hard oh my finger shirt and it's awesome thanks for the content and entertainment good luck with your builds this is exciting later boys know what we're sending ok look at those what those those are 3d printed ranges I'm in love let me see this this Wow can I check it out good thing you were here for you to PFI speed was shown us sick there goes dude those are good you don't like those are 3d printed I need a change dude those are sick ok so he sent those just for like awesome don't throw those user what no we gotta launch yeah I'm not sending this you're making your necklace real quickly these election I gotta chain it these are hard drive CD piping oh oh my god there's a little weight to it this was a great idea this is a great and look he sent us enough to have a good time for a minute right yeah like this yeah it's gonna be like there is she'd open these a long time should open these this morning with that plenty of I throw it under that Supra hey Jamie check those out bro they said they won up to you with your CDs millimeter sockets whoa look out over this there's six 10 mils oh yes we need those oh my gosh I think that's like the best present this is amazing they sent us back to 10 mils bags of 10 oh this is oh look car guide tools I was like okay so what drawer are you gonna make it in SNR motoring you sent some stickers too nice that's like the best gift ever dude look hey guys you can never have too many ten millimeter sockets so here are 24 to put in the 10 millimeter drawer for the tool which one is it broken got choose I don't know hey what happened already they're already gone empty your pocket serum I have to have you empty your pocket see that sweet yeah so I made that pocket empty who you already chose it we got some zip ties in there already this is gonna be the 10 millimeter drawer and yeah open walkin little pony that's the most tens I've seen in one spot honestly it's a beautiful sight oh my gosh is amazing but then we're just getting started now I just gotta throw some right there no we need all the hands we can get all the 10 look how empty this door is still maybe that will never be out of time again we got to thank goodness you know when we need a 10 oh sorry gone too when they disappeared dude thank you SNR muttering for all the 10 millimeter sockets he said these stickers also had 20 horsepower a big deer bow on them yep my showing up needs I'm sure blown my laptop music because every customer needs 101 there you go there's sticker on there and the 10 mil door it started do the catch can the black catch can battery holder no that's the time for them it's like the same woman how got bad odors spend a note needing a catch can for anything unless maybe for years oh it's all hand her in hey Kyle Brent Emilio and everyone else I bought this oil catch can for my Prius but the location I wanted to put it in I would not be able to access it to drain it once front bumper was installed so here you are pedaling yeah that's the same one that is on the hatch it is it's just black so enjoy it too right now was awesome that is awesome yeah I don't see it needing to be on a Prius yeah I don't know I want you boost his Prius is making but it got sick thank you Brian yeah go for it it has me some pretty hard this coast in there for you alright so I'll let you do the honors if they're not coke so I'm pumped open it no matter what this is totally familiar I'm not gonna lie dude I'm kind of hungry right now it don't touch those hey man is there a note in there look at all the food dude hold on I have to double-check something I think I might know who sent this so Joe from novice garage actually sent us this a care package so thank you so much some veggie sticks veggie sticks these are so good appreciate that Joe looking it's all melee alright so not for my weight Rene mean if anyone wants to send more feel free yeah this is awesome we'll never turn down free food no and free cokes no I don't even go home and I'm gonna take my monsters cuz you know Kyle names Kyle it all for me this way though yeah you just put it right here like hey you should all we pop the snap on off put it there pop the snap I'm still paying for this thing 20 years he's gone for it oh no he wasn't lying dude snap out of it here let me get down put that on a husky and sell it on eBay I'm launching it off the diner by symbolically it gets the heat stream done yeah that's what we're talking about I like that that's legit that's on there good too gently better than the other oh man you actually put the booster boy shut up put these custom 3d printed wrenches on the toolboxes oh yeah those are awesome boys with a logo yeah it's yeah thanks for sending those those are awesome well guys we really don't have too much else going on today I just wanted to show you guys that we got the all-wheel-drive Dino over here at the shop and we're still waiting on the air compressor to start on Honduras roll cage and then hopefully those rod bearings come tomorrow so we can start on your motor and then I'm probably gonna hold off on the mr2 motor for a little bit because we want to focus on Han drew help with that thing knocked out get her going then we'll focus on the mr2 after that but also something that we have to do in between I do have a little bit of bad news about wago guys so as she sits she is currently not running she is a little hurt right now and she's gonna have to go back under surgery so I do have another video that we're gonna come out with in the next couple days from when we were still in Texas if you guys noticed at the end of the last video James is like now let's go rip this wacko and then I cut the video there she got hurt a little bit was all I can say so we'll show you guys more of that and we do already have everything on the way to get it fixed but yeah be prepared for that video guys she's definitely hurt and we pulled the spark plug there is some damage inside of her so I don't think you're gonna make it just decided to go four-wheeling in the shop see what you guys were up to Long Walk come back for snacks already neighbors I'd like to borrow some brown sugar well we just got this prime pantry delivery from Amazon so yeah send some brown sugar for bright guys well guys that's gonna be it for tonight huge thanks to everyone who sent us the fan mail and thanks for the snacks feel free to set more we're not gonna say no to free food and yeah we also got some stuff to launch with the Dino now so send us more stuff like this this guy sent us hard drive platters is what he called these they're just like little discs from the hard drives out of a computer those should fly and cause some carnage so we'll see what those do and the 3d printed wrenches were awesome and the ten millimeter sockets we're also awesome so thank you guys so much and it's gonna be it for tonight Doug if that Dino installed now yes we do become in be awesome thousand horsepower thousand horse all-wheel drive Honda roof something like that 600 horsepower wagon now after we fix it James has to go get the toolbox\n"