**A First-Hand Experience with Dro Aluminum Case**

As I sat down to record this video, I thought to myself, "Why not just slap this on all the way and see what it looks like?" I'm usually more cautious and would pause the recording mid-stream, but today I decided to take a different approach. I wanted to document my experience with the Dro aluminum case in its entirety, from start to finish.

**The Installation Process**

I started by removing the existing back panel of my phone, which was an S5. As I examined it, I noticed that it came with two extra screws as a precautionary measure. "Just in case you lose one," the manufacturer had thoughtfully included them. I decided to tighten the top screw first, being careful not to overtighten it, as I didn't want to strip the screw head. The goal was to get everything installed smoothly and without any issues.

**The Resulting Look**

Once the screws were tightened, I stepped back to admire my handiwork. To my surprise, the phone looked quite sleek with the aluminum case on. It matched the color of my existing phone perfectly, which was a nice bonus. The light glistening off the side of the case caught my eye, and I couldn't help but notice the subtle details, such as the aluminum trimming around the sides.

**Testing the Power Button**

Before proceeding further, I decided to test the power button to ensure it wasn't affected by the new case. To my relief, it worked perfectly, without any delay or hesitation. However, I did need to adjust the position of the power button slightly to get it lined up correctly with the rest of the phone.

**The Benefits of Aluminum Cases**

As I examined the case further, I noticed that the back was wide open, which meant that I still had access to my micro USB charger and microphone. This feature is particularly useful for those who want to charge their phone or take calls without having to remove the case. Additionally, the aluminum material provides excellent protection against drops, making it a great option for those who are always on-the-go.

**Customer Experience**

Throughout my experience with Dro cases, I've found that they offer top-notch customer service. My previous interactions with the company had been positive, and this new case did not disappoint. In fact, I was impressed by how seamlessly it fit onto my phone, even with a tempered glass screen protector already in place.

**Conclusion**

In conclusion, I would highly recommend the Dro aluminum case to anyone looking for a stylish and functional accessory to protect their phone. With its sleek design, wide access ports, and excellent protection against drops, it's a great option for those who want to keep their phone safe without sacrificing style.

"WEBVTTKind: captionsLanguage: enyo what's up everybody it's your boy flaws back again with another video and today we're going to take a look at the Drago Supernova S5 aluminum bumper case for your Samsung Galaxy S5 now shout out to everybody who watch my videos you already know that Drago is one of my favorite companies you see me do the uh Ducati case for the S4 the aluminum red bumper that was a go you see me do the HTC1 you see me do the iPhone 5 these cases are certified boss all right now let me pull up the website real quick so you can see where to get it from go to dragod design incorporated.com I'll throw the link up in the description now the Supernova comes in a bunch of colors you got champagne gold you got Astro silver you got flare red electric blue and media black now I went with the media black since I got the uh black S5 now the price for this this will run you $80 all right now go to the website check out all the specs for yourself but this is a go so let's pop it open and see what it looks like first off presentation beautiful presentation $80 that's what you expect simple instructions on the back of the box we'll go through that and see what it looks like now let's uh pop it open and see what you get inside the Box yeah this is a really nice presentation by the way y know I like a nice presentation okay so now you get your screws and your screwdriver cuz keep in mind this is a bumper case that screws in inside stay with me y'all the usual book and and that's about it so now let's open this and see what it looks like okay so you got a couple of screws in here and you get the actual aluminum bumper company Brandon on the side now this just feels beautiful though it feels solid feels like a solid piece of aluminum let's um let's let's split it apart and see what it looks like now it should be screws in there already I think those are two extra screws yeah screws in here already now like I said I had a bunch of these cases already so I already know that but all you got to do loosen up the two screws now you want to do this over a hard table or a cloth or something because once these little screws drop it's going to be hard to find them okay so let's unscrew this all the way there you have it now the case separates into two parts now yall see I got big hands so these little screwdrivers are not really my thing all right here we go all right so let's get that last screw at the bottom okay so there we go so two-part bumper case now to put this on real simple just line up all your your buttons and everything and just make sure you're putting it on the right way you got your power buttons on the side I mean your volume up and down on the side so we're just going to slide those in right over the buttons Slide the other side of the case right on now if you look inside the case also you see real close you see got that little company branding this is official tissue right here but let's like I said let's just slap this on all the way and see what it looks like all right so that's what it's going to look like let's uh let's put the screws in why not okay I'm doing this live I normally would pause the video right now but let's just do it live this time and uh see how long it takes to to get on all right so let's screw the top screw in first I'm not going to put it too tight because I like to switch cases so you don't want to tighten it too much accidentally strip the screw but it comes with two extra screws as you can see right there two extra screws so just in case you lose one you still got another one on Deck okay so let's tighten the top one and that's it now make sure you save the screwdriver save the extra screws somewhere where you won't lose them but um this is what it's going to look like when it's installed let me just unlock the phone real quick this is what it's going to look like when it's installed now this looks so hot with now match the color you got with your phone you know get the appropriate bumper to match that phone but with the black S5 and the black bumper case it just looks sick now you see you see the the light glistening off the side has the nice aluminum trimming on the side even though it has the media black color you got some company branding you got your let's see if the uh power button works on this okay power button works now maybe I didn't line it up 100% oh there it goes okay so a little bit of delay with my power button I got to make sure I line it up 100% let's check the volume volume buttons are lined up cut out for your headphone jack IR Blaster still in Tech the back is wide open all right so you're not going to have to worry about any signal loss and all that because I hear a lot of people complain that they had signal loss with aluminum cases well this is like I said this is my fifth aluminum case I had for my Drago never had a problem with signal loss like never not once $80 for this this is a win right here bottom is wide open so you still got access to your micro USB charger microphone now this is a win this is just a nice looking bumper case for all y' people that don't like the big aox cases and all of those you know big giant speaking Tough Armor cases if you want something that's more classy more more you know discret and still gives your phone some nice protection because this is going to give you drop protection of course it's aluminum and also um it fits with the temper glass screen protector cuz I got a glass screen protector on here right now and it slid on with no problem all right so all in all on a scale of 1 to 10 I'm giving case a win now like I said Draco I already deal with them in the past this is a good company you don't have to have no problems with the customer service and all of that y'all seen the ducatti case for yourself that's probably still one of my favorite S4 cases that a lot of people ask me where I got it from and um it's from Dro all right so check out the aluminum case for yourself all right now I'm going to take this off and put it back on again because it seems like my power button is a little bit out of place but that's what you get when you put cases on from behind the camera all right let me just throw something in there real quick I figured out what was going on with the power button I actually tightened up the top screw a little bit too tight so fellas ladies when you're installing this case make sure you don't overtighten the top screw or else your power button might get pressed in so all I did was unscrew the top a little bit and now my power button works just fine all right so that's all you got to do make sure you don't overtighten the scre take your time and do it right but um all in all I would say this case is a win right here all right so check out the website for yourself like I said I'll throw the link up in the description shout out shout out to everybody that rock with me on Facebook for square Twitter Google+ shout out to all the Google gangsters I see y holding down that Facebook page shout out to everybody hitting me up on Voxer and a special shout out to everybody rocking with me on Instagram y'all know that's where we at full time 100% Full Throttle it's your boy fla I'mma catch up yall on the next trip all y haters all y' trolls close your eyes and picture me rolling it's your boy floss I'm out deucesyo what's up everybody it's your boy flaws back again with another video and today we're going to take a look at the Drago Supernova S5 aluminum bumper case for your Samsung Galaxy S5 now shout out to everybody who watch my videos you already know that Drago is one of my favorite companies you see me do the uh Ducati case for the S4 the aluminum red bumper that was a go you see me do the HTC1 you see me do the iPhone 5 these cases are certified boss all right now let me pull up the website real quick so you can see where to get it from go to dragod design incorporated.com I'll throw the link up in the description now the Supernova comes in a bunch of colors you got champagne gold you got Astro silver you got flare red electric blue and media black now I went with the media black since I got the uh black S5 now the price for this this will run you $80 all right now go to the website check out all the specs for yourself but this is a go so let's pop it open and see what it looks like first off presentation beautiful presentation $80 that's what you expect simple instructions on the back of the box we'll go through that and see what it looks like now let's uh pop it open and see what you get inside the Box yeah this is a really nice presentation by the way y know I like a nice presentation okay so now you get your screws and your screwdriver cuz keep in mind this is a bumper case that screws in inside stay with me y'all the usual book and and that's about it so now let's open this and see what it looks like okay so you got a couple of screws in here and you get the actual aluminum bumper company Brandon on the side now this just feels beautiful though it feels solid feels like a solid piece of aluminum let's um let's let's split it apart and see what it looks like now it should be screws in there already I think those are two extra screws yeah screws in here already now like I said I had a bunch of these cases already so I already know that but all you got to do loosen up the two screws now you want to do this over a hard table or a cloth or something because once these little screws drop it's going to be hard to find them okay so let's unscrew this all the way there you have it now the case separates into two parts now yall see I got big hands so these little screwdrivers are not really my thing all right here we go all right so let's get that last screw at the bottom okay so there we go so two-part bumper case now to put this on real simple just line up all your your buttons and everything and just make sure you're putting it on the right way you got your power buttons on the side I mean your volume up and down on the side so we're just going to slide those in right over the buttons Slide the other side of the case right on now if you look inside the case also you see real close you see got that little company branding this is official tissue right here but let's like I said let's just slap this on all the way and see what it looks like all right so that's what it's going to look like let's uh let's put the screws in why not okay I'm doing this live I normally would pause the video right now but let's just do it live this time and uh see how long it takes to to get on all right so let's screw the top screw in first I'm not going to put it too tight because I like to switch cases so you don't want to tighten it too much accidentally strip the screw but it comes with two extra screws as you can see right there two extra screws so just in case you lose one you still got another one on Deck okay so let's tighten the top one and that's it now make sure you save the screwdriver save the extra screws somewhere where you won't lose them but um this is what it's going to look like when it's installed let me just unlock the phone real quick this is what it's going to look like when it's installed now this looks so hot with now match the color you got with your phone you know get the appropriate bumper to match that phone but with the black S5 and the black bumper case it just looks sick now you see you see the the light glistening off the side has the nice aluminum trimming on the side even though it has the media black color you got some company branding you got your let's see if the uh power button works on this okay power button works now maybe I didn't line it up 100% oh there it goes okay so a little bit of delay with my power button I got to make sure I line it up 100% let's check the volume volume buttons are lined up cut out for your headphone jack IR Blaster still in Tech the back is wide open all right so you're not going to have to worry about any signal loss and all that because I hear a lot of people complain that they had signal loss with aluminum cases well this is like I said this is my fifth aluminum case I had for my Drago never had a problem with signal loss like never not once $80 for this this is a win right here bottom is wide open so you still got access to your micro USB charger microphone now this is a win this is just a nice looking bumper case for all y' people that don't like the big aox cases and all of those you know big giant speaking Tough Armor cases if you want something that's more classy more more you know discret and still gives your phone some nice protection because this is going to give you drop protection of course it's aluminum and also um it fits with the temper glass screen protector cuz I got a glass screen protector on here right now and it slid on with no problem all right so all in all on a scale of 1 to 10 I'm giving case a win now like I said Draco I already deal with them in the past this is a good company you don't have to have no problems with the customer service and all of that y'all seen the ducatti case for yourself that's probably still one of my favorite S4 cases that a lot of people ask me where I got it from and um it's from Dro all right so check out the aluminum case for yourself all right now I'm going to take this off and put it back on again because it seems like my power button is a little bit out of place but that's what you get when you put cases on from behind the camera all right let me just throw something in there real quick I figured out what was going on with the power button I actually tightened up the top screw a little bit too tight so fellas ladies when you're installing this case make sure you don't overtighten the top screw or else your power button might get pressed in so all I did was unscrew the top a little bit and now my power button works just fine all right so that's all you got to do make sure you don't overtighten the scre take your time and do it right but um all in all I would say this case is a win right here all right so check out the website for yourself like I said I'll throw the link up in the description shout out shout out to everybody that rock with me on Facebook for square Twitter Google+ shout out to all the Google gangsters I see y holding down that Facebook page shout out to everybody hitting me up on Voxer and a special shout out to everybody rocking with me on Instagram y'all know that's where we at full time 100% Full Throttle it's your boy fla I'mma catch up yall on the next trip all y haters all y' trolls close your eyes and picture me rolling it's your boy floss I'm out deuces\n"