Introducing Sleek Sleep: A Revolutionary Tweak for iPhone Users
Hey guys, David from unlock.com here, and I'm excited to share with you another amazing jailbreak tweak that's going to make your life easier. Today, we're going to explore how to use Sleek Sleep, a game-changing feature that allows you to wave your hand over the front of your iPhone to either put it to sleep or wake it up.
To get started, head over to the Cydia Store and search for "Sleek Sleep" in the bottom right corner. Type it in and tap on the result to purchase and install the tweak. Once the installation is complete, sign in with your preferred account, enter your password, select the payment method, and tap close. The purchase will then turn into an install, which you can confirm by tapping on it.
After the installation is complete, restart your device and navigate to Settings. From there, go to Sleek Sleep to enable or disable the feature as per your preference. You can also toggle on "Insomnia," which means that the sensor will always work even when the screen is off or the device is turned off. However, keep in mind that this could drain your battery a bit more, so it's recommended to disable it when you're not using it.
Another useful feature is the ability to set Sleek Sleep to an "Activator Event." If you don't know what an activator is, click on the link provided in the video or below for a detailed explanation of how to use it. With this feature, you can customize the behavior of Sleek Sleep by setting it up to respond to another event, such as pressing a button or using a gesture.
Before you start using Sleek Sleep, I recommend navigating down to the settings section underneath where you'll find options for adjusting the swipe duration, timeout, and length. These settings will help you fine-tune the feature to work perfectly with your preferences. For example, if you turn down the "Cool Down" setting all the way to zero, you can also adjust the "Swipes" option to one. This will enable Sleek Sleep to detect hand movements more accurately.
With these adjustments in place, you'll be able to use Sleek Sleep to put your iPhone to sleep or wake it up simply by waving your hand over the front of the device. The feature may not work perfectly at first, but with a bit of tweaking (pun intended), you'll get the hang of it quickly.
I hope this tutorial has been helpful in getting you started with Sleek Sleep. If you have any questions or need further assistance, feel free to leave a comment below. Don't forget to follow me on Twitter, Facebook, Google+, or subscribe to our YouTube channel for more tips and tricks, as well as other how-to videos like this one.
"WEBVTTKind: captionsLanguage: enhey guys this David from the unlock.com and today we have another jailbreak tweak for you this one is going to make it possible to wave your hand over the front of your iPhone to either put it to sleep or wake it up okay we're going to open the city store tap on the search in the bottom right type in Sleek sleep one word tap that tap purchase tip uh then sign in with whatever account you want to use enter in your password select the way you'd like to pay then tap close and the purchase will turn into an install tap that tap confirm wait for it to install once it's done tap reboot device and wait for that to happen Okay once it restarts go to settings uh go to Sleek sleep uh you can enable it disable it turn on insomnia which means that the sensor is always working even when the screen is off or the device is off uh could drain your battery a little bit but makes this kind of work a little bit better uh disable it when calling so obviously when you're on the phone it won't turn on and off the screen all the time uh you can make it set to Portrait only so it's only when it's in portrait mode which is standing up like this not landscape mode uh you can also set it to an activator event if you don't know what activator is click on the link here in this video or beneath this video on our site uh to go to our video to show you what that is and how to install that um that basically allows you to set it to another event instead of just the proximity sensor um then I highly recommend going down here underneath that and before you get started uh this will allow you to change the swipe duration the swipe timeout the swipe length Etc um and this kind of gets you to make it work properly for you when it first is set to default it doesn't work that well honestly um so what I did was I turned the cool down all the way to zero and I turned swipes to one um and I didn't touch these but again you can adjust those to make it better for you but with that enabled um you can kind of just wipe your hand over there and swipe again to get the screen to come back on and there you go I hope that helped some of you and if you'd like to check out some of our other tips and tricks or other how videos feel free to follow me on Twitter Facebook Google+ or subscribe to our YouTube channelhey guys this David from the unlock.com and today we have another jailbreak tweak for you this one is going to make it possible to wave your hand over the front of your iPhone to either put it to sleep or wake it up okay we're going to open the city store tap on the search in the bottom right type in Sleek sleep one word tap that tap purchase tip uh then sign in with whatever account you want to use enter in your password select the way you'd like to pay then tap close and the purchase will turn into an install tap that tap confirm wait for it to install once it's done tap reboot device and wait for that to happen Okay once it restarts go to settings uh go to Sleek sleep uh you can enable it disable it turn on insomnia which means that the sensor is always working even when the screen is off or the device is off uh could drain your battery a little bit but makes this kind of work a little bit better uh disable it when calling so obviously when you're on the phone it won't turn on and off the screen all the time uh you can make it set to Portrait only so it's only when it's in portrait mode which is standing up like this not landscape mode uh you can also set it to an activator event if you don't know what activator is click on the link here in this video or beneath this video on our site uh to go to our video to show you what that is and how to install that um that basically allows you to set it to another event instead of just the proximity sensor um then I highly recommend going down here underneath that and before you get started uh this will allow you to change the swipe duration the swipe timeout the swipe length Etc um and this kind of gets you to make it work properly for you when it first is set to default it doesn't work that well honestly um so what I did was I turned the cool down all the way to zero and I turned swipes to one um and I didn't touch these but again you can adjust those to make it better for you but with that enabled um you can kind of just wipe your hand over there and swipe again to get the screen to come back on and there you go I hope that helped some of you and if you'd like to check out some of our other tips and tricks or other how videos feel free to follow me on Twitter Facebook Google+ or subscribe to our YouTube channel\n"
