Lexar NQ100 2.5” SATA III (6Gb_s) SSD 💾 Can this Value SSD give a Samsung Evo a run for its money
**Article: Full Review of Lexar NQ100 2.5" Solid State Drive**
---
### Introduction
Hello everyone! It's Phil from Tefertex here today. We’re going to be taking a look at this Lexar NQ100, which is a 2.5-inch solid state drive (SSD). The retail price for these SSDs is roughly around $29.99, but prices may vary depending on the size you choose. If you're interested in purchasing one, make sure to check out the link provided in the description below. Let’s dive into this review!
---
### Lexar NQ100 Overview
The Lexar NQ100 is an SSD that uses QLC NAND flash technology. It’s important not to confuse it with Lexar's other model, the NS100, which uses TLC NAND flash. This is the NQ model, so keep that in mind when considering your purchase.
The drive itself is a 2.5-inch SATA SSD, and we’re looking at the 240GB version for this review. The packaging is straightforward—a blue box with some paperwork inside. The SSD has blue inserts on it, along with arrows indicating its features on the sides and back. On the back, you’ll find the serial number and read speed listed as up to 550 megabytes per second (MB/s).
One thing we noticed right away is that there’s no mention of the write speed on the packaging or on the drive itself. While we’re not sure why Lexar decided not to include this information, it could be a point of concern for potential buyers. After doing some quick research on Lexar's website, we couldn’t find any clear indication of the write speed either. This seems odd, especially since we discovered during testing that the write speed is actually quite good.
---
### Packaging and Unboxing
Inside the box, you’ll find the SSD itself along with a significant amount of paperwork. To be honest, there’s quite a bit of documentation here, which makes us wonder why Lexar doesn’t opt for a QR code on the packaging instead. This would not only save paper but also streamline the process of accessing manuals and warranty information.
The SSD is simple enough—there’s no fancy metal casing; it's just a gray plastic box with "Lexar" printed on it. The backside of the drive is equally unremarkable, with just some model numbers, serial codes, and warranty stickers. When you open up the packaging, you can see the controller and memory chips inside. It’s pretty straightforward stuff, but if you’re into detailed specifications or want to verify the components, this might be useful for you.
---
### Testing the Lexar NQ100
We decided to put the Lexar NQ100 through some rigorous testing to get a better idea of its performance. Using CrystalDiskMark, we found that the read speed averaged around 537 MB/s, which is close to the advertised 550 MB/s listed on the box. This is impressive for an entry-level SSD, so we’re not complaining about the read speed here.
However, when it comes to write speeds, Lexar hasn’t provided any information on the packaging or website. During our testing with CrystalDiskMark and ATTO, we found that the write speed averaged around 505 MB/s, with some runs even hitting nearly 510 MB/s. This is actually quite a solid performance for an SSD in this price range.
We decided to test the drive further by copying a folder of approximately 42.5GB with over 3,000 files onto the SSD. Initially, the speed was slow due to the large number of small files, but once it got to the bigger files, it really started to shine, averaging around 450-460 MB/s during the transfer.
To ensure an accurate comparison, we also tested the drive in reverse—copying data from another location onto the Lexar NQ100. After renaming the file and moving it to a different directory, we saw similar performance, with speeds averaging around 450-460 MB/s for large files.
---
### Comparisons and Performance
All testing was conducted on the same machine using the same cables, components, software, and operating system version. This setup ensures that no external factors could skew the results in favor of one drive over another.
When compared to other drives like the PNY SSDs and Team GX1 models, the Lexar NQ100 held its own pretty well. It performed slightly better than some of its competitors, particularly in write speed tests, which came in at 509 MB/s using ATTO. Even though it’s a more affordable option compared to the NS100 (Lexar's higher-end model), the NQ100 doesn’t fall too far behind in terms of performance.
---
### Final Thoughts and Recommendations
Overall, we’re pretty impressed with the Lexar NQ100. It’s a decent value SSD from a trusted brand, and it delivers solid performance for its price. While it may not have all the bells and whistles that more expensive SSDs offer (like TRIM support or additional software), it gets the job done efficiently.
That said, we do have one major gripe: Lexar’s decision to omit the write speed from both the packaging and their website is puzzling. The write speed here is actually quite good—at over 500 MB/s—which is something worth shouting about. By not providing this information upfront, they might be missing out on potential sales.
In conclusion, we would highly recommend the Lexar NQ100 to anyone looking for an affordable and reliable SSD. Just keep in mind that it’s a value-oriented drive, so don’t expect enterprise-level features or performance. If you can snag one at a good price, there’s no reason not to go for it.
---
Phil from Tefertex out! Thanks for watching, and stay tuned for more reviews and tech content soon.