I'm really looking forward to testing this out, it has 3M tape right here and using that I will be able to connect it to my headset so I'm just gonna press it on. I think that's how you should do it. Oops, okay, so it has a magnetic cap so with that I can actually remove it and then just clip it back on. Oh okay, so you can remove the microphone itself as well. I show it a bit closer here so the microphone also just clicks off and then well not clicking it's magnetic you can also reposition the microphone using the magnets.

Okay, let's put on this headset and the microphone, okay, and I just added the webcam and as you can see it's already tracking me when I move around. The webcam is just going to follow me and just as I expected I mean look at the quality of the webcam right now I'm gonna look at it first of all the quality is absolutely amazing but second of all there is no light coming from the front of me and the webcam still looks absolutely gorgeous my video lights are actually on the side and then kind of on the back of me. Well, I forgot it's not a dragging webcam so I can actually show you so that light is right there.

And then if I move a bit there's another one right there and if I move to this side the lights are on my face the webcam will obviously adjust but this side of my face is pretty much completely dark and there is no noise there's no grain it's not a black spot over here. And I'm kind of good, over here, nope, this webcam is absolutely amazing, I love it.

Now, one thing that changed about the Insta360 since I made the video that I mentioned before which probably was like a month ago so usually when you would be using the sr360 and you close your call you close the program Etc. The webcam would go to sleep mode which is amazing however then when you start using it again or you start another call the webcam will go to the standard position and maybe you're sitting over here and the standard position isn't really filming you.

And then the webcam would be stuck like that and you would have to go in the frame again link the upcom again link it to you, I mean that's a hustle. They've let me know that with the new software when you start the link again it will start go to the last position and then from there on it will look for you and then immediately snap onto you.

That's very convenient, let's hope this microphone is going to sound professional because that would be great. Now it is Bluetooth and I'm not really sure if it has a USB to plug into the PC oh my so it does come with a USB receiver which makes sense for a high speed connection. So what your webcam is recording for video and then what this bike is recording for audio doesn't have a big delay in fact that's pretty funny actually.

I've had this USB laying around in my studio for over a year I had no clue what it was for but I kept it and well luckily I did. Let's plug get in, let's turn on the microphone okay so the blue light keeps shining I think it's connected I think we can test it but what you're hearing right now is the quality of this microphone right here.

The mod mic Wireless is recording me at the moment and so as a comparison as you can see there's a microphone taped on the back of my shirt and as you right here you can actually see the tape. However, the price of this mic is 500 it is being recorded with a 300 record that could also send it to a camera which cost probably four or five hundred.

And I mean then on the other hand you have this here the model mic it's also completely wireless it's going to my PC and well you can be the judge of the quality now. I really enjoyed building this setup, I'm pretty happy with the end result this definitely fits my living room. I didn't want the setup to be too gamer like but it still has RGB it has an ultrawide the PC case is really cool.

And I'm looking forward to building an epic crazy setup in the studio links to all of these parts will be in the description, thank you so much for watching and I hope I will see you in one of my next videos have a nice day.

WEBVTTKind: captionsLanguage: entoday I'm finally rebuilding my apartment gaming and streaming setup because I've been using this one for a while and it could use an upgrade as you can see I'm definitely gonna be able to use this Corsair gaming chair really excited for this I've never really owned a real gaming chair it's probably a bad choice I'm also really excited about testing out this microphone here this here is called the model mic and this Clips onto your headset basically it's just a big upgrade for a normal headset microphone I'm gonna have to use the 3M tape to tape it on my headset and it just replaces this however you can see the box right here I bought the upgrade to the very popular arctis 7. well looking at this it looks like it's the pro version so it's the upgrade to the pro version of this here this here is the Nova Pro Wireless and it should be amazing however what I want to start with is the desk now I did use this desk in a previous video it's from flexi spot it was an amazing desk in quickly going to assemble this desk on the cardboard having this much desk space is going to be so much better than that does so the top of the desk comes in three parts they are very easy to attach together now in the previous video I did complain about these lines here because well you can clearly see where the parts are attached together however I did use the desk for a while and it absolutely didn't bother me at all the next thing we need are the electric legs for the desk I do want to try to stand a bit more while working on stuff because well I'm setting a lot so I just finished attaching the main frame to the desk it has this whole steel structure that will hold everything that we need to attach to it later like the motorized lags and it also holds the control unit and the power supply to which we need to connect the legs now let's get this desk out of the way by the way this is a heavy disc if you remember my mystery setup video My Assistant bought this desk there that was a complete RGB gaming desk however it doesn't really fit my living room here it was a temporary desk it was also kind of a quirky desk because as you can see here there's a drink holder now if I see something like this on a desk it's immediately written up for me it feels like a desk for kids I don't know so let's get this out of the way this desk is definitely way heavier my only concern with this desk is if it's going to be 2 too big for this corner I hope it's not gonna be by the way this here is the PC that I'm still gonna use in the setup I've built this PC a while back on the channel but as you can see I've been using it without the stand and it looks way better width it's the Aza Cube it looks amazing so I wanted to be kind of an eye catcher right here let's see if there's gonna be enough room for this desk I think it'll be perfect it's gonna replace this with a black power strip but let's try I'm gonna set this desk to a higher position to get a great feel of it also can't wait to build the Corsair gaming chair this one is kinda broken but look at the amount of space I'm gonna have here this is gonna be amazing I hope there is still room left for my dining room table but let's be fair I'm gonna be eating in front of my PC anyway now with Queen all this stuff here that's mostly gonna be for future videos I have three floating shelves however I want to use two of them and they are part like my address they are gonna be part of a future setup that's gonna be a Star Wars setup I actually don't entirely know what this is because my assistant bought all this stuff as a mystery Star Wars streaming setup the thing I'm absolutely most excited about is two Star Wars lightsabers this is absolutely amazing what is this looks like it's an animated dusk Companion now I'm getting distracted I'm gonna steal these two floating shelves from this setup because I want to install them above my home setup and let me show you something really cool this here is a laser printer that the company sent me a while back and as you can see I've been doing some testing with it I've printed out my own logo now what I want to do is I want to take one of these floating shelves and then create a really big 3D and Logo so basically what I'm gonna do these are the wrong Parts but I'm gonna print out the same logo a few times and then I'm gonna tape all the parts together to make a really thick 3D and logo and I think I'm gonna need pretty much all of this plywood here however you gotta see how this laser printer works it's really cool so the first thing you do is you get your design ready in the software done for this 3D logo I'm gonna choose to cut the wood as you can see I've also selected my type of wood here and now we're gonna click on process now as you'll be able to see there is something else here and this is a device that I can turn on and as you can see it starts making a lot lot of noise let me turn it off real quick so this is a pump that's blowing air through this tube here and it travels all the way down here and gets blown onto the wood in order to cool down the wood and this is to reduce the burning so as you can see on the back it's pretty bad but on the front it's extremely clean and that's partly because of all this air that's blowing down on it so we're pretty much ready to print now what I'm gonna do now is framing and as you can see it's gonna Mark the territory that is gonna laser so if this Laser Now moves outside of the wooden area then it's gonna laser my desk and we don't want that but it stayed within the area of the plywood so I'm gonna click on start click right here and it is gonna start lasering now I did forget the air pump so let's turn it on it's gonna be very loud now my neighbors are gonna hate me and I will show you a time lapse of this all right let's see what it looks like I'm gonna take this off I feel like it was like kind of pixelated around the edges if that's how I can call it but I think that's pretty decent right as you can see very dirty on the back but very very clean on the front now back at my apartment I did set up my laser leveler I think that's what it's called I also clearly forgot to set the camera to autofocus this is very blurry but then I did some testing with the floating shelves and some stuff to put onto it but until this point I hadn't really realized that these shelves are gray and not black and they absolutely do not fit my desk so to be fair at this point I don't really know what I'm gonna do with the blank wall above the setup all right now I texted the front who just moved into a new house because I thought I remembered he had an extra floating shelf and turns out he has two of them they are black this is a fancy packaging and with a completely separate audio interface so anyway I'm gonna go get those floating shelves in a few hours oh these look amazing this is such an upgrade from the previous one the cushions also feel extremely soft I guess this is gonna be a bridge of cables three of them now the reason I went for a steel series again is because this headset here the steel series RX7 it's extremely popular it is completely wireless there's also a cheaper wired version I think it's the arctis 3. the main reason why I think this headset is so amazing is this elastic here when you put this headset on your head the top frame here the hard frame isn't touching your head the only thing touching my head is the elastic and because of that even if you wear it for literally 10 hours straight you just forget it's on your head and of course the upgraded arctis Nova plus the pro version definitely has that same elastic and wow it feels amazing on my head it also removes quite a bit of background sound and look at this it comes with an extra battery so when you take one of the sideboards off you can see that there's a battery in here so this means that whenever the headset is empty instead of having to plug in the cable and I'm using wires you can just pop this battery out plug in the other one and then use it wirelessly while this battery is charging now you might be wondering by the way really looking forward to upgrading this chair I've never really had a gaming chair but you might be wondering if this headset which you already had is also amazing and it still works why are you upgrading to this one and while my editor will show you some footage but what you're seeing right now is my dad building a completely new set in my studio for me when I still lived with my parents they gave me the biggest room in the house to use as my studio and my dad helped me to paint it to decorate it to build the whole studio there and he helped me even more over here we basically transformed the whole apartment into a studio we read that the floors we built false walls we painted it I have a storage room that he built and recently he told me he needs a work from home setup so what I'm gonna do is I'm gonna use one of these two for his setup I'm gonna build him a complete setup so either way I had to buy another one we're gonna check out this right now and then I'll see if we can use this or not so at this point I made a little road trip I got the floating shelves for my friends and then I quickly went to my storage unit in the basement which by the way is a complete must look at this holy however I do remember where everything is because this is is the stand of my PC case and I'm looking forward to checking it out here in the setup because it's been a while since I've used the stand of this case oh this PC is definitely really really heavy let's see what it looks like all right this is a giant case my monitor is gonna have to move to the side even more in order to make sure that this has enough space around it look at the size of this case on this desk I think I'm gonna call this the women repeller because let's be fair that's pretty much what it is but I promise you you're gonna be shocked when you see the RGB on these fans it looks amazing now it's time to install this monitor on the monitor arm because well I want to install all the other peripherals and I want to know which space I have left which is going to be like all of it because it's a monitor arm but I also want to give a giant thanks to the sponsor who made this builds possible licked licked honestly is an amazing service for creators who want to use mainstream music in their videos they have a massive library of over 1 million mainstream songs that are all ready to be used in your content and just so there's no confusion these are real mainstream songs like this one for example it's pretty crazy that you can use a song like this in your content usually that wouldn't be possible and you gotta be honest there's no way that using a song like this and your content doesn't make it more enjoyable now besides their 1 million plus mainstream songs they also have a library of over a hundred thousand stock tracks and those can all be used in your content with a simple subscription linked has a multiple case studies showing the benefit of using their mainstream songs in your videos and according to them greater to use mainstream music from linked in their videos receive more views more comments more ad revenue and they especially so crazy increase in the amount of share switch according to me is probably because people have a way stronger reaction to content that has recognizable music in it now the way I am planning to use licked in the future in my own content is by using popular music during b-roll segments or time lapses when I'm building a saddle for example and those parts could definitely be more interesting with popular mainstream music on that so if you want to make a great content recognizable music then click the first link in my description got a 50 discount on your first mainstream song as well as 14 days of royalty-free Music completely for free thanks to Lake for sponsoring this Channel and now back to the video These are definitely not the right screws for this backplate but I can't seem to find the original one let's move the desk a bit so we can connect this on the back all right so the monitor has been installed and look at how clean this looks this is amazing using a monitor arm immediately makes the setup look so much more clean now this monitor arm I will link it in the description it definitely wasn't cheap but it's a great one it's for heavy monitors and it also has Cable Management on the bottom one of the parts needs to be screwed of in order to tuck the cables away the other board just shoves off it and can easily be reconnected and using a cable management arm like this makes it very very clean especially for here in my living room I definitely wouldn't want all my cables to be visible now I've said this a lot during this video but I'm so excited for this gaming chair as I said before it's the first gaming chair I ever bought well technically I have bought the gaming chair before the one from which.com the red one I've used it in a lot of videos just to use as a problem however I'm not really sure if I can count that as a real gaming chair experience because it was a very crappy chair oh wow this chair perfectly fits my whole living room like all the colors of the chairs of the floor of the table I assume this is going to be a neck pillow usually I don't use these things but this feels very comfortable then what I assume to be the lumbar support oh this looks extremely clean now people always say gaming chairs aren't ergonomic and we'll have to test this one but as you can see it perfectly fits around my back and here on the side I'm not gonna bore you with the whole building of this chair so here's a quick time lapse now attaching this recline mechanism to the back of the chair definitely isn't easy because these screws just don't want to go in I'm not sure if you'll be able to see it but nothing really aligns so did you hear that it snapped into place and just like that we can screw in the last screw now tighten it and it is time to connect it to the stand look at I thought about this I completely forgot so let's see if we can just make this fall on top of it I assume so all right let's wiggle a bit and I think it'll be okay let's see how sturdy it is if I sit on it maybe I'll get launched into the air okay the bag definitely needs to move I'm not sure if I'll be able to change this but I feel like I'm in a racing chair I'm completely leaning backwards that's not good is it is that supposed to do it okay I think I can change it here on the bottom by tightening this I actually don't think it helped I think this here on the bottom is to allow you to lean backwards or not now it's really tight however as you can see from the side I'm still leaned backwards now next I wanted to install the floating shelves however I also want this desk to work in a standing desk position so I raise the desk first to a position that would work and then I tested around with the shelves to figure out an optimal position for both of them now this desk is huge so I had to move it out of the way and to be completely honest I didn't really trust this laser so I measured the height of the laser for both sides and it should be no surprise but it matched perfectly now the next thing was the most stressful part I had to draw the holes that I was going to drill afterwards now if you mess up this part and your shelves won't be straight now the electric screwdriver I have couldn't really drill deep enough into the wall so I made another road trip this time to my parents and I got my dad's heavy duty drill so I really hope that this is gonna do it I think it will that was a quick tip you can always put a piece of tape on your drill so that way you know how deep you have to drill into the wall all right let's try and see if this is Strong Enough by the way a great tip you can always take a vacuum and I hold it underneath it and then everything that comes out of the wall will immediately be vacuumed all right that was very easy let's see if it's deep enough gonna need a hammer well I assume we can use this as a hammer so it's at least a bit useful crap all right the hole needs to be a bit deeper put in the plug make sure it's completely in and now let's hope my measurements were right let's hope the other side fits it barely does but I think we'll make it work that definitely won't come up again I do not think that this is completely leveled I guess we'll quickly see when I shove on one of these shelves good god let's hope so let's try and see if it is leveled and as you can see it's not completely perfect this side should be a bit higher but it's definitely not a bad attempt now I managed to do the shelves and I think they look absolutely amazing I think this one is good like it is but we need the M logo right there next to the plant now I'm really looking forward to checking out this microphone here it's really unique the webcam as well but you've probably heard about it before however we need to assemble my logo for on the floating shelves and basically what I'm gonna do is I'm gonna take this double-sided tape and I'm gonna tape it on the logo take off the protective peel and on this way I'll be able to tape on all the parts and I make layers and as you see I just did one I hope this will give a very cool 3d effect from the set when I have a few this so I'm not gonna bore you with this whole process I'll show a quick time lapse of me attaching all of these parts and then now we can add it to the floating shelf look at this it's absolutely amazing it was definitely a lot of work to make this but I think it's pretty creative and it's a great way to bring my YouTube channel into my living room now the mouse I'm using in this setup is the Razer Naga Pro it is wireless and the numpad on the side the micro buttons are extremely convenient for playing MMOs I absolutely love this mouse just like I love this keyboard This is the Apex Pro and it has been my favorite keyboard for a very long time it's the light speed version the switches are amazing they are linear oh and I hadn't talked about this before but the monitor also has RGB on the back you can set it to Blue to match this setup I've had this monitor for a while actually it was in my first build on this channel but I've just been loving it so far and I've never really upgraded to like a main Ultra wide High budget monitor it is 3840 by 1600 pixels which means it's kind of 4K with the top being cropped off it's an IPS monitor one millisecond response time g-sync and most importantly it's 38 inch which means that it's bigger than the usual 34 inch ultra white however lately there's a lot of great monitors that came out many LED monitors OLED monitors really big ultraw bites and I gotta say I've been thinking about buying a crazy monitor but then for the studio on the other side can't really decide between the Samsung j9 monitors or to go for like a normal ultraviolet but maybe a bigger one let me know in the comments which monitor is your dream monitor now I'm gonna test the microphone and the webcam together the webcam you might have heard of it before it's the insta 360. and this is the most premium feeling webcam that I've ever held in my hand it is heavy it is sturdy it looks great on a monitor let's be honest now this webcam the insta360 link was part of a dedicated video I did a while back on the channel and I had used this webcam before doing that video it's the reason I wanted to do the video and I'm using it right now because I just wanted here in the setup if I'm doing a call with a sponsor there's a pretty big chance I'm doing it here in my my living room to webcam right there and as you can see from the b-roll in that video the webcam just kept tracking me around it's amazing and let's be honest if you look at the image quality this doesn't look like it came from a webcam okay now before checking out the webcam here in the setup the thing of me looking forward to during this whole build this microphone so this got sent to me a while back this is called the mod bike Wireless they probably don't even remember sending me this anymore because it's literally like one or two years ago I'm gonna look up the price here all right so apparently on Amazon the price is 140 dollars which definitely isn't cheap but it has outstanding ratings so I'm really looking forward to testing this it has 3M tape right here and using that I will be able to connect it to my headset so I'm just gonna press it on I think that's how you should do it oops okay so it has a magnetic cap so with that I can actually remove it and then just clip it back on oh okay so you can remove the microphone itself as well I show it a bit closer here so the microphone also just clicks off and then well not clicking it's magnetic you can also reposition the microphone using the magnets okay so let's put on this headset and the microphone okay and I just added the webcam and as you can see it's already tracking me when I move around the webcam is just going to follow me and just as I expected I mean look at the quality of the webcam right now I'm gonna look at it first of all the quality is absolutely amazing but second of all there is no light coming from the front of me and the webcam still looks absolutely gorgeous my video lights are actually on the side and then kind of on the back of me well I forgot it's not a dragging webcam so I can actually show you so that light is right there and then if I move a bit there's another one right there and if I move to this side the lights are on my face the webcam will obviously adjust but this side of my face is pretty much completely dark and there is no noise there's no grain it's not a black spot over here and I'm kind of good over here nope this webcam is absolutely amazing I love it now one thing that changed about the insta360 since I made the video that I mentioned before which probably was like a month ago so usually when you would be using the sr360 and you close your call you close the program Etc the webcam would go to sleep mode which is amazing however then when you start using it again or you start another call the webcam will go to the standard position and maybe you're sitting over here and the standard position isn't really filming you and then the webcam would be stuck like that and you would have to go in the frame again link the upcom again link it to you I mean that's a hustle and they've let me know that with the new software when you start the link again it will start go to the last position and then from there on it will look for you and then immediately snap onto you and that's very convenient let's hope this microphone is going to sound professional because that would be great now it is Bluetooth and I'm not really sure if it has a USB to plug into the PC oh my so it does come with a USB receiver which makes sense for a high speed connection so that why your webcam is recording for video and then what this bike is recording for audio doesn't have a big delay in fact that's pretty funny actually I've had this USB laying around in my studio for over a year I had no clue what it was for but I kept it and well luckily I did let's plug get in let's turn on the microphone okay so the blue light keeps shining I think it's connected I think we can test it but what you're hearing right now is the quality of this microphone right here the mod mic Wireless is recording me at the moment and so as a comparison as you can see there's a microphone taped on the back of my shirt and as you right here you can actually see the tape however the price of this mic is 500 it is being recorded with a 300 record that could also send it to a camera which cost probably four or five hundred and I mean then on the other hand you have this here the model mic it's also completely wireless it's going to my PC and well you can be the judge of the quality now I really enjoyed building this setup I'm pretty happy with the end result this definitely fits my living room I didn't want the setup to be too gamer like but it still has RGB it has an ultrawide the PC case is really cool and I'm looking forward to building an epic crazy setup in the studio links to all of these parts will be in the description thank you so much for watching and I hope I will see you in one of my next videos have a nice daytoday I'm finally rebuilding my apartment gaming and streaming setup because I've been using this one for a while and it could use an upgrade as you can see I'm definitely gonna be able to use this Corsair gaming chair really excited for this I've never really owned a real gaming chair it's probably a bad choice I'm also really excited about testing out this microphone here this here is called the model mic and this Clips onto your headset basically it's just a big upgrade for a normal headset microphone I'm gonna have to use the 3M tape to tape it on my headset and it just replaces this however you can see the box right here I bought the upgrade to the very popular arctis 7. well looking at this it looks like it's the pro version so it's the upgrade to the pro version of this here this here is the Nova Pro Wireless and it should be amazing however what I want to start with is the desk now I did use this desk in a previous video it's from flexi spot it was an amazing desk in quickly going to assemble this desk on the cardboard having this much desk space is going to be so much better than that does so the top of the desk comes in three parts they are very easy to attach together now in the previous video I did complain about these lines here because well you can clearly see where the parts are attached together however I did use the desk for a while and it absolutely didn't bother me at all the next thing we need are the electric legs for the desk I do want to try to stand a bit more while working on stuff because well I'm setting a lot so I just finished attaching the main frame to the desk it has this whole steel structure that will hold everything that we need to attach to it later like the motorized lags and it also holds the control unit and the power supply to which we need to connect the legs now let's get this desk out of the way by the way this is a heavy disc if you remember my mystery setup video My Assistant bought this desk there that was a complete RGB gaming desk however it doesn't really fit my living room here it was a temporary desk it was also kind of a quirky desk because as you can see here there's a drink holder now if I see something like this on a desk it's immediately written up for me it feels like a desk for kids I don't know so let's get this out of the way this desk is definitely way heavier my only concern with this desk is if it's going to be 2 too big for this corner I hope it's not gonna be by the way this here is the PC that I'm still gonna use in the setup I've built this PC a while back on the channel but as you can see I've been using it without the stand and it looks way better width it's the Aza Cube it looks amazing so I wanted to be kind of an eye catcher right here let's see if there's gonna be enough room for this desk I think it'll be perfect it's gonna replace this with a black power strip but let's try I'm gonna set this desk to a higher position to get a great feel of it also can't wait to build the Corsair gaming chair this one is kinda broken but look at the amount of space I'm gonna have here this is gonna be amazing I hope there is still room left for my dining room table but let's be fair I'm gonna be eating in front of my PC anyway now with Queen all this stuff here that's mostly gonna be for future videos I have three floating shelves however I want to use two of them and they are part like my address they are gonna be part of a future setup that's gonna be a Star Wars setup I actually don't entirely know what this is because my assistant bought all this stuff as a mystery Star Wars streaming setup the thing I'm absolutely most excited about is two Star Wars lightsabers this is absolutely amazing what is this looks like it's an animated dusk Companion now I'm getting distracted I'm gonna steal these two floating shelves from this setup because I want to install them above my home setup and let me show you something really cool this here is a laser printer that the company sent me a while back and as you can see I've been doing some testing with it I've printed out my own logo now what I want to do is I want to take one of these floating shelves and then create a really big 3D and Logo so basically what I'm gonna do these are the wrong Parts but I'm gonna print out the same logo a few times and then I'm gonna tape all the parts together to make a really thick 3D and logo and I think I'm gonna need pretty much all of this plywood here however you gotta see how this laser printer works it's really cool so the first thing you do is you get your design ready in the software done for this 3D logo I'm gonna choose to cut the wood as you can see I've also selected my type of wood here and now we're gonna click on process now as you'll be able to see there is something else here and this is a device that I can turn on and as you can see it starts making a lot lot of noise let me turn it off real quick so this is a pump that's blowing air through this tube here and it travels all the way down here and gets blown onto the wood in order to cool down the wood and this is to reduce the burning so as you can see on the back it's pretty bad but on the front it's extremely clean and that's partly because of all this air that's blowing down on it so we're pretty much ready to print now what I'm gonna do now is framing and as you can see it's gonna Mark the territory that is gonna laser so if this Laser Now moves outside of the wooden area then it's gonna laser my desk and we don't want that but it stayed within the area of the plywood so I'm gonna click on start click right here and it is gonna start lasering now I did forget the air pump so let's turn it on it's gonna be very loud now my neighbors are gonna hate me and I will show you a time lapse of this all right let's see what it looks like I'm gonna take this off I feel like it was like kind of pixelated around the edges if that's how I can call it but I think that's pretty decent right as you can see very dirty on the back but very very clean on the front now back at my apartment I did set up my laser leveler I think that's what it's called I also clearly forgot to set the camera to autofocus this is very blurry but then I did some testing with the floating shelves and some stuff to put onto it but until this point I hadn't really realized that these shelves are gray and not black and they absolutely do not fit my desk so to be fair at this point I don't really know what I'm gonna do with the blank wall above the setup all right now I texted the front who just moved into a new house because I thought I remembered he had an extra floating shelf and turns out he has two of them they are black this is a fancy packaging and with a completely separate audio interface so anyway I'm gonna go get those floating shelves in a few hours oh these look amazing this is such an upgrade from the previous one the cushions also feel extremely soft I guess this is gonna be a bridge of cables three of them now the reason I went for a steel series again is because this headset here the steel series RX7 it's extremely popular it is completely wireless there's also a cheaper wired version I think it's the arctis 3. the main reason why I think this headset is so amazing is this elastic here when you put this headset on your head the top frame here the hard frame isn't touching your head the only thing touching my head is the elastic and because of that even if you wear it for literally 10 hours straight you just forget it's on your head and of course the upgraded arctis Nova plus the pro version definitely has that same elastic and wow it feels amazing on my head it also removes quite a bit of background sound and look at this it comes with an extra battery so when you take one of the sideboards off you can see that there's a battery in here so this means that whenever the headset is empty instead of having to plug in the cable and I'm using wires you can just pop this battery out plug in the other one and then use it wirelessly while this battery is charging now you might be wondering by the way really looking forward to upgrading this chair I've never really had a gaming chair but you might be wondering if this headset which you already had is also amazing and it still works why are you upgrading to this one and while my editor will show you some footage but what you're seeing right now is my dad building a completely new set in my studio for me when I still lived with my parents they gave me the biggest room in the house to use as my studio and my dad helped me to paint it to decorate it to build the whole studio there and he helped me even more over here we basically transformed the whole apartment into a studio we read that the floors we built false walls we painted it I have a storage room that he built and recently he told me he needs a work from home setup so what I'm gonna do is I'm gonna use one of these two for his setup I'm gonna build him a complete setup so either way I had to buy another one we're gonna check out this right now and then I'll see if we can use this or not so at this point I made a little road trip I got the floating shelves for my friends and then I quickly went to my storage unit in the basement which by the way is a complete must look at this holy however I do remember where everything is because this is is the stand of my PC case and I'm looking forward to checking it out here in the setup because it's been a while since I've used the stand of this case oh this PC is definitely really really heavy let's see what it looks like all right this is a giant case my monitor is gonna have to move to the side even more in order to make sure that this has enough space around it look at the size of this case on this desk I think I'm gonna call this the women repeller because let's be fair that's pretty much what it is but I promise you you're gonna be shocked when you see the RGB on these fans it looks amazing now it's time to install this monitor on the monitor arm because well I want to install all the other peripherals and I want to know which space I have left which is going to be like all of it because it's a monitor arm but I also want to give a giant thanks to the sponsor who made this builds possible licked licked honestly is an amazing service for creators who want to use mainstream music in their videos they have a massive library of over 1 million mainstream songs that are all ready to be used in your content and just so there's no confusion these are real mainstream songs like this one for example it's pretty crazy that you can use a song like this in your content usually that wouldn't be possible and you gotta be honest there's no way that using a song like this and your content doesn't make it more enjoyable now besides their 1 million plus mainstream songs they also have a library of over a hundred thousand stock tracks and those can all be used in your content with a simple subscription linked has a multiple case studies showing the benefit of using their mainstream songs in your videos and according to them greater to use mainstream music from linked in their videos receive more views more comments more ad revenue and they especially so crazy increase in the amount of share switch according to me is probably because people have a way stronger reaction to content that has recognizable music in it now the way I am planning to use licked in the future in my own content is by using popular music during b-roll segments or time lapses when I'm building a saddle for example and those parts could definitely be more interesting with popular mainstream music on that so if you want to make a great content recognizable music then click the first link in my description got a 50 discount on your first mainstream song as well as 14 days of royalty-free Music completely for free thanks to Lake for sponsoring this Channel and now back to the video These are definitely not the right screws for this backplate but I can't seem to find the original one let's move the desk a bit so we can connect this on the back all right so the monitor has been installed and look at how clean this looks this is amazing using a monitor arm immediately makes the setup look so much more clean now this monitor arm I will link it in the description it definitely wasn't cheap but it's a great one it's for heavy monitors and it also has Cable Management on the bottom one of the parts needs to be screwed of in order to tuck the cables away the other board just shoves off it and can easily be reconnected and using a cable management arm like this makes it very very clean especially for here in my living room I definitely wouldn't want all my cables to be visible now I've said this a lot during this video but I'm so excited for this gaming chair as I said before it's the first gaming chair I ever bought well technically I have bought the gaming chair before the one from which.com the red one I've used it in a lot of videos just to use as a problem however I'm not really sure if I can count that as a real gaming chair experience because it was a very crappy chair oh wow this chair perfectly fits my whole living room like all the colors of the chairs of the floor of the table I assume this is going to be a neck pillow usually I don't use these things but this feels very comfortable then what I assume to be the lumbar support oh this looks extremely clean now people always say gaming chairs aren't ergonomic and we'll have to test this one but as you can see it perfectly fits around my back and here on the side I'm not gonna bore you with the whole building of this chair so here's a quick time lapse now attaching this recline mechanism to the back of the chair definitely isn't easy because these screws just don't want to go in I'm not sure if you'll be able to see it but nothing really aligns so did you hear that it snapped into place and just like that we can screw in the last screw now tighten it and it is time to connect it to the stand look at I thought about this I completely forgot so let's see if we can just make this fall on top of it I assume so all right let's wiggle a bit and I think it'll be okay let's see how sturdy it is if I sit on it maybe I'll get launched into the air okay the bag definitely needs to move I'm not sure if I'll be able to change this but I feel like I'm in a racing chair I'm completely leaning backwards that's not good is it is that supposed to do it okay I think I can change it here on the bottom by tightening this I actually don't think it helped I think this here on the bottom is to allow you to lean backwards or not now it's really tight however as you can see from the side I'm still leaned backwards now next I wanted to install the floating shelves however I also want this desk to work in a standing desk position so I raise the desk first to a position that would work and then I tested around with the shelves to figure out an optimal position for both of them now this desk is huge so I had to move it out of the way and to be completely honest I didn't really trust this laser so I measured the height of the laser for both sides and it should be no surprise but it matched perfectly now the next thing was the most stressful part I had to draw the holes that I was going to drill afterwards now if you mess up this part and your shelves won't be straight now the electric screwdriver I have couldn't really drill deep enough into the wall so I made another road trip this time to my parents and I got my dad's heavy duty drill so I really hope that this is gonna do it I think it will that was a quick tip you can always put a piece of tape on your drill so that way you know how deep you have to drill into the wall all right let's try and see if this is Strong Enough by the way a great tip you can always take a vacuum and I hold it underneath it and then everything that comes out of the wall will immediately be vacuumed all right that was very easy let's see if it's deep enough gonna need a hammer well I assume we can use this as a hammer so it's at least a bit useful crap all right the hole needs to be a bit deeper put in the plug make sure it's completely in and now let's hope my measurements were right let's hope the other side fits it barely does but I think we'll make it work that definitely won't come up again I do not think that this is completely leveled I guess we'll quickly see when I shove on one of these shelves good god let's hope so let's try and see if it is leveled and as you can see it's not completely perfect this side should be a bit higher but it's definitely not a bad attempt now I managed to do the shelves and I think they look absolutely amazing I think this one is good like it is but we need the M logo right there next to the plant now I'm really looking forward to checking out this microphone here it's really unique the webcam as well but you've probably heard about it before however we need to assemble my logo for on the floating shelves and basically what I'm gonna do is I'm gonna take this double-sided tape and I'm gonna tape it on the logo take off the protective peel and on this way I'll be able to tape on all the parts and I make layers and as you see I just did one I hope this will give a very cool 3d effect from the set when I have a few this so I'm not gonna bore you with this whole process I'll show a quick time lapse of me attaching all of these parts and then now we can add it to the floating shelf look at this it's absolutely amazing it was definitely a lot of work to make this but I think it's pretty creative and it's a great way to bring my YouTube channel into my living room now the mouse I'm using in this setup is the Razer Naga Pro it is wireless and the numpad on the side the micro buttons are extremely convenient for playing MMOs I absolutely love this mouse just like I love this keyboard This is the Apex Pro and it has been my favorite keyboard for a very long time it's the light speed version the switches are amazing they are linear oh and I hadn't talked about this before but the monitor also has RGB on the back you can set it to Blue to match this setup I've had this monitor for a while actually it was in my first build on this channel but I've just been loving it so far and I've never really upgraded to like a main Ultra wide High budget monitor it is 3840 by 1600 pixels which means it's kind of 4K with the top being cropped off it's an IPS monitor one millisecond response time g-sync and most importantly it's 38 inch which means that it's bigger than the usual 34 inch ultra white however lately there's a lot of great monitors that came out many LED monitors OLED monitors really big ultraw bites and I gotta say I've been thinking about buying a crazy monitor but then for the studio on the other side can't really decide between the Samsung j9 monitors or to go for like a normal ultraviolet but maybe a bigger one let me know in the comments which monitor is your dream monitor now I'm gonna test the microphone and the webcam together the webcam you might have heard of it before it's the insta 360. and this is the most premium feeling webcam that I've ever held in my hand it is heavy it is sturdy it looks great on a monitor let's be honest now this webcam the insta360 link was part of a dedicated video I did a while back on the channel and I had used this webcam before doing that video it's the reason I wanted to do the video and I'm using it right now because I just wanted here in the setup if I'm doing a call with a sponsor there's a pretty big chance I'm doing it here in my my living room to webcam right there and as you can see from the b-roll in that video the webcam just kept tracking me around it's amazing and let's be honest if you look at the image quality this doesn't look like it came from a webcam okay now before checking out the webcam here in the setup the thing of me looking forward to during this whole build this microphone so this got sent to me a while back this is called the mod bike Wireless they probably don't even remember sending me this anymore because it's literally like one or two years ago I'm gonna look up the price here all right so apparently on Amazon the price is 140 dollars which definitely isn't cheap but it has outstanding ratings so I'm really looking forward to testing this it has 3M tape right here and using that I will be able to connect it to my headset so I'm just gonna press it on I think that's how you should do it oops okay so it has a magnetic cap so with that I can actually remove it and then just clip it back on oh okay so you can remove the microphone itself as well I show it a bit closer here so the microphone also just clicks off and then well not clicking it's magnetic you can also reposition the microphone using the magnets okay so let's put on this headset and the microphone okay and I just added the webcam and as you can see it's already tracking me when I move around the webcam is just going to follow me and just as I expected I mean look at the quality of the webcam right now I'm gonna look at it first of all the quality is absolutely amazing but second of all there is no light coming from the front of me and the webcam still looks absolutely gorgeous my video lights are actually on the side and then kind of on the back of me well I forgot it's not a dragging webcam so I can actually show you so that light is right there and then if I move a bit there's another one right there and if I move to this side the lights are on my face the webcam will obviously adjust but this side of my face is pretty much completely dark and there is no noise there's no grain it's not a black spot over here and I'm kind of good over here nope this webcam is absolutely amazing I love it now one thing that changed about the insta360 since I made the video that I mentioned before which probably was like a month ago so usually when you would be using the sr360 and you close your call you close the program Etc the webcam would go to sleep mode which is amazing however then when you start using it again or you start another call the webcam will go to the standard position and maybe you're sitting over here and the standard position isn't really filming you and then the webcam would be stuck like that and you would have to go in the frame again link the upcom again link it to you I mean that's a hustle and they've let me know that with the new software when you start the link again it will start go to the last position and then from there on it will look for you and then immediately snap onto you and that's very convenient let's hope this microphone is going to sound professional because that would be great now it is Bluetooth and I'm not really sure if it has a USB to plug into the PC oh my so it does come with a USB receiver which makes sense for a high speed connection so that why your webcam is recording for video and then what this bike is recording for audio doesn't have a big delay in fact that's pretty funny actually I've had this USB laying around in my studio for over a year I had no clue what it was for but I kept it and well luckily I did let's plug get in let's turn on the microphone okay so the blue light keeps shining I think it's connected I think we can test it but what you're hearing right now is the quality of this microphone right here the mod mic Wireless is recording me at the moment and so as a comparison as you can see there's a microphone taped on the back of my shirt and as you right here you can actually see the tape however the price of this mic is 500 it is being recorded with a 300 record that could also send it to a camera which cost probably four or five hundred and I mean then on the other hand you have this here the model mic it's also completely wireless it's going to my PC and well you can be the judge of the quality now I really enjoyed building this setup I'm pretty happy with the end result this definitely fits my living room I didn't want the setup to be too gamer like but it still has RGB it has an ultrawide the PC case is really cool and I'm looking forward to building an epic crazy setup in the studio links to all of these parts will be in the description thank you so much for watching and I hope I will see you in one of my next videos have a nice day