**How to Jailbreak Your iOS Device 64-bit Device on iOS 9.3.3**

This tutorial will guide you through the process of jailbreaking your iOS device, specifically for 64-bit devices running iOS 9.3.3.

**System Requirements and Preparations**

To start, you need to have a Windows device as the program used for the jailbreak is only available for Windows at this time. Additionally, you must have the latest version of iTunes installed on your computer. It's also essential to make sure you are running iOS 9.3.3 on your device. You can check by going to Settings > General > About and verify that it says "Version 9.3.3". If it doesn't, go to Software Update to update.

**Setting Up Your Device for the Jailbreak**

To ensure a smooth jailbreaking process, you need to set up certain settings on your device. Go to Settings > iCloud and turn off Find My iPhone. Next, go to Settings > Touch ID & Passcode and make sure that your passcode is completely off. This will allow the jailbreak to work more efficiently.

**Downloading the Pangu Software**

To begin the jailbreak process, you need to download the Pangu software by clicking on the provided link and then the red button on their page, followed by the green button at the top of the next page. Wait for it to save to your computer while it's downloading. You can plug in your phone via USB and open up iTunes to click back up. After that, close iTunes.

**Running the Pangu Program**

Right-click on the Pangu program and hit "Run as Administrator" then click the big green button in the middle of the window. Wait for it to download its contents. If it doesn't automatically detect your device, you can click the blue button with the pangu symbol hiding from behind it in the middle of the five icons to start it manually.

**The Creepy Part: Entering an Apple ID and Passcode**

After a while, the program will ask for an Apple ID and a passcode. I don't recommend putting your actual Apple ID and password into this field as it's just too creepy. Instead, you can click on the green Chinese writing next to the Apple ID field and follow the instructions provided to create a new dummy Apple ID that you can use until someone messes it up for everybody.

**Completing the Jailbreak Process**

If you decide not to create your own Apple ID, you can simply type in one of the pre-made ones. Once you enter an Apple ID and password, click the green button yet again and let it do its thing. Eventually, you will get a very happy computer with another green button which you'll need to click once more. This will open up Device Management on your device.

**Finalizing the Jailbreak**

Tap that new Apple ID and say that you trust it twice (Trust again). Then, click the green button again on the desktop and one more time. On the phone, tap the new pangu app that has appeared on the home screen and say okay for it to send you notifications and then tap the big circle in the middle after a couple seconds of that.

**Locking Your Screen**

After a few seconds, locking your screen by pushing the power button will pop up another notification just ignore it. You might also get another one about your storage being full because it's downloading things for Cydia but eventually, it will just rest start itself when it does.

**Accessing Cydia and Installing Tweaks**

You can slide to unlock it swipe over and you'll find Cydia. Tap Cydia and wait for it to set itself up. You're now good to go! If you've been waiting for a jailbreak this video is for you, please thumbs up it or share it it's greatly appreciated.

**Additional Resources**

If you did please head to my site where I have a whole plethora repository of all the jailbreak tweaks that I have found in the past that are awesome that you might want to try to install now that you're jailbroken. If you've been waiting otherwise check out my channel if you guys like what you see, Please Subscribe and as always thanks for watching

"WEBVTTKind: captionsLanguage: enso it finally happened pangu trusted jailbreak developers have jailbroken iOS 9.3.3 now with that said there are a few caveats one this is a tethered jailbreak which means that if you restart your phone you'll lose the jailbreak and that's real Annoying but it's what we got for now now if it does become untethered at some point this tutorial will probably still work there is a rumor that it might never become untethered ever again I don't know either way though uh that's one caveat the other thing is that your device has to be a 64bit device for iPhones that means the 5S or higher and then basically most of the newer iPads for a full list of the compatible devices you can click the link below other than that as with all new jailbreaks a lot of the tweaks in Cydia the store where you get Jailbreak tweaks from if you're not familiar uh won't probably work right away they need to be updated uh now by the jailbreak developer so just keep that in mind when you're messing around with tweaks now without further ado here's how to jailbreak your iOS device 64-bit device on iOS 9.3.3 okay real quick before we begin this will only work on windows at the moment as the program they made is for Windows there will probably be a Mac version at some point but for now there's only Windows you must also have the latest version of iTunes installed if you don't click the link below to download it to your computer next you need to make sure you are on iOS 9.3.3 so you can go to settings General about and check to see that it says version 9.3.3 there if it doesn't you can go to software update and update from there next we need to set up some things on the phone to make the jailbreak work a little smoother we're going to go to settings iCloud turn off find my iPhone then we're going to go to settings Touch ID and passcode and make sure that your passcode Touch ID everything is completely off after that we're going to download the pangu software by clicking the link below then click the red button on their page there then the green button at the top of the next page and wait for it to save to your computer while it's downloading we can plug in our phone via USB open up iTunes and click back up now after that we can close iTunes then we're going to right click on the pangu program and hit run as administrator then click the Big Green button in the middle wait for it to download its thing then click the new button in the middle It'll ask you to allow it access say yes it should automatically detect your device at this point if it does you can just click this giant green button and wait for it to do its thing if it doesn't automatically detect it you can click the blue button with the pangu symbol hiding from behind it in the middle of the five icons to start it manually after a while here comes the creepy part it asks you for an Apple ID and a passcode so I don't recommend putting yours in that just creeps me out a little too much so I actually went ahead and created one for you guys to use until someone messes it up for everybody if that happens uh you can just click the green Chinese writing next to the Apple ID field and it'll teach you how to create your own I suggest creating your own and using that as like a dummy Apple ID as opposed to using your real one for my credentials that I created for you for while they work until someone passes them up again you can click the link below and find that once you put in an Apple ID and password click the green button yet again and let it do its thing eventually you will get a very happy computer uh and another green button which will'll click yet yet another green button after that to click and then the phone should automatically open to device management where you can tap that new Apple ID and say that you trust it and Trust again then we can click the green button again on the desktop and one more time and then on the phone tap the new pangu app that has appeared on the home screen say okay for it to send you notifications and then tap the big circle in the middle after a couple seconds of that you're going to lock your screen by pushing the power button a notification will pop up just ignore it you might also get another one about your storage being full that's because it's downloading things for Cydia but eventually it will just rest start itself when it does you can slide to unlock it swipe over and you'll find Cydia you can then tap Cydia wait for it to set itself up and you're good to go there you go guys finally a jailbreak um hope you guys enjoyed that video I'm sure a lot of you have been waiting for it for a while but if you did please thumbs up it or share it it is greatly appreciated also head to my site where I have a whole plethora repository even of all the jailbreak tweaks that I have found in the past that are awesome that you might want to try to install now that you're jailbroken if you've been waiting otherwise check out my channel if you guys like what you see Please Subscribe and as always thanks for watchingso it finally happened pangu trusted jailbreak developers have jailbroken iOS 9.3.3 now with that said there are a few caveats one this is a tethered jailbreak which means that if you restart your phone you'll lose the jailbreak and that's real Annoying but it's what we got for now now if it does become untethered at some point this tutorial will probably still work there is a rumor that it might never become untethered ever again I don't know either way though uh that's one caveat the other thing is that your device has to be a 64bit device for iPhones that means the 5S or higher and then basically most of the newer iPads for a full list of the compatible devices you can click the link below other than that as with all new jailbreaks a lot of the tweaks in Cydia the store where you get Jailbreak tweaks from if you're not familiar uh won't probably work right away they need to be updated uh now by the jailbreak developer so just keep that in mind when you're messing around with tweaks now without further ado here's how to jailbreak your iOS device 64-bit device on iOS 9.3.3 okay real quick before we begin this will only work on windows at the moment as the program they made is for Windows there will probably be a Mac version at some point but for now there's only Windows you must also have the latest version of iTunes installed if you don't click the link below to download it to your computer next you need to make sure you are on iOS 9.3.3 so you can go to settings General about and check to see that it says version 9.3.3 there if it doesn't you can go to software update and update from there next we need to set up some things on the phone to make the jailbreak work a little smoother we're going to go to settings iCloud turn off find my iPhone then we're going to go to settings Touch ID and passcode and make sure that your passcode Touch ID everything is completely off after that we're going to download the pangu software by clicking the link below then click the red button on their page there then the green button at the top of the next page and wait for it to save to your computer while it's downloading we can plug in our phone via USB open up iTunes and click back up now after that we can close iTunes then we're going to right click on the pangu program and hit run as administrator then click the Big Green button in the middle wait for it to download its thing then click the new button in the middle It'll ask you to allow it access say yes it should automatically detect your device at this point if it does you can just click this giant green button and wait for it to do its thing if it doesn't automatically detect it you can click the blue button with the pangu symbol hiding from behind it in the middle of the five icons to start it manually after a while here comes the creepy part it asks you for an Apple ID and a passcode so I don't recommend putting yours in that just creeps me out a little too much so I actually went ahead and created one for you guys to use until someone messes it up for everybody if that happens uh you can just click the green Chinese writing next to the Apple ID field and it'll teach you how to create your own I suggest creating your own and using that as like a dummy Apple ID as opposed to using your real one for my credentials that I created for you for while they work until someone passes them up again you can click the link below and find that once you put in an Apple ID and password click the green button yet again and let it do its thing eventually you will get a very happy computer uh and another green button which will'll click yet yet another green button after that to click and then the phone should automatically open to device management where you can tap that new Apple ID and say that you trust it and Trust again then we can click the green button again on the desktop and one more time and then on the phone tap the new pangu app that has appeared on the home screen say okay for it to send you notifications and then tap the big circle in the middle after a couple seconds of that you're going to lock your screen by pushing the power button a notification will pop up just ignore it you might also get another one about your storage being full that's because it's downloading things for Cydia but eventually it will just rest start itself when it does you can slide to unlock it swipe over and you'll find Cydia you can then tap Cydia wait for it to set itself up and you're good to go there you go guys finally a jailbreak um hope you guys enjoyed that video I'm sure a lot of you have been waiting for it for a while but if you did please thumbs up it or share it it is greatly appreciated also head to my site where I have a whole plethora repository even of all the jailbreak tweaks that I have found in the past that are awesome that you might want to try to install now that you're jailbroken if you've been waiting otherwise check out my channel if you guys like what you see Please Subscribe and as always thanks for watching\n"