The Unboxing and Overview of the Rosewell RX 358 u3c External Hard Drive Enclosure

As I opened up the box, I found a user's manual, got the hardware, and then the drive enclosure itself. The enclosure is individually wrapped with the back plate, along with some mounting screws to mount your 3.5-inch drive. There's also a wall adapter that provides AC power to both the enclosure and your hard drive. It's worth noting that this enclosure is USB 3.0 and E-IDE compatible.

Taking a closer look at the front of the enclosure reveals that it is made of black aluminum, with the Rosewell logo prominently displayed. The enclosure also has a mesh grill above the 80 mm fan, which is set to intake mode, pulling in cool air from the outside and directing it over your hard drive. On the sides, we have ABS plastic construction, while on the opposite end, there are ports and switches. Right there, you'll find a 12-volt DC power port, a USB 3.0 port, and a switch to turn your enclosure on or off.

The enclosure also has a fan switch for on or off, as well as an E-IDE port. If you take a look at this side of the enclosure, you can see the inside of the enclosure by removing the back plate. The back plate is made of black aluminum and provides additional airflow for your hard drive through another mesh grill. You can also see the circuit board and SATA connection used to mount your 3.5-inch drive.

To set up this enclosure, all you need to do is remove the back plate, slide your 3.5-inch drive directly under the Serial ATA dock, and then proceed to sliding off the side panels of your enclosure. This will reveal the mounting points for your hard drive. Take those mounting screws, bolt them down, make sure that your hard drive is secure, and then slide the side panels back on and secure them with the included screws.

Once you've mounted the back plate to the enclosure using the remaining screws, you'll be ready to go. The enclosure is currently connected to my computer via USB 3.0, and I have a 2 TB Cat 5 hard drive installed. It seems to be working just fine, with the 80 mm fan barely audible. One notable feature of this enclosure is that it has two blue LED indicator lights.

That's all for this video. The Rosewell RX 358 u3c external hard drive enclosure has been a pleasure to review, and I hope you've found this unboxing and overview informative. Thank you all for watching, and I'll see you guys next time.

"WEBVTTKind: captionsLanguage: enhow's it going guys today I'm be doing a quick unboxing and overview on this external hard drive enclosure from Rosewell this is the RX 358 u3c in Black all right so upon opening up the box you find a user's manual got the hardware I'm sorry the uh Drive enclosure itself which I'll get more into in just a sec uh looks like they've individually wrapped the back plate to that enclosure got some mounting screws to Mount Your 3.5 in Drive got a wall adapter here this is AC power to power your en closure and your hard drive and uh I don't know if I mentioned this before but this enclosure is USB 3.0 and EA compatible so there are your USB 3.0 and Eide of cables taking a closer look at the front of this enclosure we can see that it is made of a black aluminum there's the rosew logo right there you've got a mesh grill just above that 80 mm fan the fan by the way is set to intake so it's going to be grabbing a bunch of uh drying cold air from the outside and pulling it in directly over your hard drive on the sides we have ABS plastic construction and on this side we've got another mesh grill just to Aid an air flow for your hard drive and on the opposite end of that we have some ports and switches so right here we've got your 12volt DC power in got a USB 3.0 Port right there your uh this is a switch to turn your enclosure on or off so it's either going to activate or deactivate your hard drive you've got a fan switch for on or off and lastly you've got an EAD Port if you take a look on this side you can actually see the inside of the enclosure by the way the back plate is right here and it is also just like the front made of black aluminum so there's your a better look at the 80 mm fan and you got your circuit board right here if you take a close look you can actually see that it is in fact a SATA connection mounting a drive in this enclosure is fairly easy make sure your back plate is removed then go ahead and slide your 3.5 in drive directly under that Serial ATA dock then you can proceed to sliding off the side panels of your enclosure and that's going to reveal the mounting points for your hard drive so take those mounting screws bolt them down and make sure that your hard drive is secure Slide the side panels back on and secure them with the included screws and lastly you're going to need to mount the back plate to the enclosure with the remaining screws all right guys so I have the enclosure all set up here it's currently connected to my computer via USB 3.0 and I've got a 2 TB Cate hard drive in there seems to be working just fine I can barely hear the 80 mm fan it's like really just inaudible pretty much it's really quiet and one I wanted to point out also is that this enclosure does have two blue LED indicator lights uh but that's going to do it for this video guys once again this has been the Rosewell RX 358 u3c external hard drive enclosure thank you all for watching this video and I'll see you guys next timehow's it going guys today I'm be doing a quick unboxing and overview on this external hard drive enclosure from Rosewell this is the RX 358 u3c in Black all right so upon opening up the box you find a user's manual got the hardware I'm sorry the uh Drive enclosure itself which I'll get more into in just a sec uh looks like they've individually wrapped the back plate to that enclosure got some mounting screws to Mount Your 3.5 in Drive got a wall adapter here this is AC power to power your en closure and your hard drive and uh I don't know if I mentioned this before but this enclosure is USB 3.0 and EA compatible so there are your USB 3.0 and Eide of cables taking a closer look at the front of this enclosure we can see that it is made of a black aluminum there's the rosew logo right there you've got a mesh grill just above that 80 mm fan the fan by the way is set to intake so it's going to be grabbing a bunch of uh drying cold air from the outside and pulling it in directly over your hard drive on the sides we have ABS plastic construction and on this side we've got another mesh grill just to Aid an air flow for your hard drive and on the opposite end of that we have some ports and switches so right here we've got your 12volt DC power in got a USB 3.0 Port right there your uh this is a switch to turn your enclosure on or off so it's either going to activate or deactivate your hard drive you've got a fan switch for on or off and lastly you've got an EAD Port if you take a look on this side you can actually see the inside of the enclosure by the way the back plate is right here and it is also just like the front made of black aluminum so there's your a better look at the 80 mm fan and you got your circuit board right here if you take a close look you can actually see that it is in fact a SATA connection mounting a drive in this enclosure is fairly easy make sure your back plate is removed then go ahead and slide your 3.5 in drive directly under that Serial ATA dock then you can proceed to sliding off the side panels of your enclosure and that's going to reveal the mounting points for your hard drive so take those mounting screws bolt them down and make sure that your hard drive is secure Slide the side panels back on and secure them with the included screws and lastly you're going to need to mount the back plate to the enclosure with the remaining screws all right guys so I have the enclosure all set up here it's currently connected to my computer via USB 3.0 and I've got a 2 TB Cate hard drive in there seems to be working just fine I can barely hear the 80 mm fan it's like really just inaudible pretty much it's really quiet and one I wanted to point out also is that this enclosure does have two blue LED indicator lights uh but that's going to do it for this video guys once again this has been the Rosewell RX 358 u3c external hard drive enclosure thank you all for watching this video and I'll see you guys next time\n"