**How to Run an Ethernet Cable from the Outside of Your House**

Running an Ethernet cable from the outside of your house can seem like a daunting task, but with the right tools and a bit of patience, it can be done. In this article, we will guide you through the process of running an Ethernet cable from the outside of your house.

**Step 1: Gather Materials and Tools**

The first step in running an Ethernet cable from the outside of your house is to gather all the necessary materials and tools. You will need a drill, bits, wire strippers, pliers, cable ties, a crimper tool, cutting tool, cable straps, masonry bit, plastic inserts, screws, downspout, metal flashing, and Ethernet cable. It's also recommended to have a plan and diagram of your house before starting the project.

**Assembling the Crimping Tool**

Once you have all the necessary materials and tools, it's time to assemble the crimping tool. The crimping tool is used to secure the ends of the Ethernet cable together. To use the crimping tool, simply feed the ends of the Ethernet cable into the slots on the crimper with the length such that the outer sheathing sticks out about 1-2 inches. You will then need to strip any insulation from the ends of the cable using wire strippers and then insert the whole thing into the slotted part of the crimping tool.

**Crimping the Ends of the Cable**

With the crimping tool assembled, it's time to crimp the ends of the Ethernet cable together. The crimper is designed to compress the insulation on the end of the cable, creating a secure connection between the two ends. Simply insert the ends of the cable into the slots on the crimper and apply gentle pressure until you hear a click. This should take no longer than a minute or so per end once you get the hang of it.

**Drilling Holes for Cable Straps**

After crimping the ends of the Ethernet cable together, it's time to drill holes for the cable straps. A masonry bit is needed for this step as it will be used to drill through wood and other materials. You can use a screwdriver or drill bits to create holes every 12-16 inches along the length of the wire.

**Securing the Wire with Cable Straps**

With the holes drilled, it's time to secure the wire with cable straps. The cable strap is designed to wrap around the wire and hold it in place, preventing it from being damaged or compromised. Simply wrap the cable strap around the wire and secure it with a screw or clip.

**Cable Management**

Once the wire is secured, it's time to consider cable management. Cable management involves keeping the Ethernet cable organized and tidy, preventing it from being damaged or visible from the outside of the house. You can use cable ties to keep the wire in place, or use a cable management system specifically designed for outdoor use.

**Curing the Wire**

After running the Ethernet cable through the holes drilled earlier, you will need to cure the wire. The curing process involves applying a sealant or coating to the wire to prevent moisture from seeping in and causing damage. This step is crucial as it will help to ensure that the Ethernet cable remains secure and functional over time.

**Cutting the Wire**

The final step in running an Ethernet cable from the outside of your house is to cut the wire to the appropriate length. Simply use a pair of wire cutters or scissors to trim the excess wire, leaving about 6-8 inches of cable at the end.

**Terminating the Cable**

Once you have cut the wire to the correct length, it's time to terminate the cable. This involves connecting the Ethernet cable to a jack or connector, which will provide access to the network connection inside the house.

**Conclusion**

Running an Ethernet cable from the outside of your house can seem like a daunting task, but with the right tools and a bit of patience, it can be done. By following these steps, you should be able to successfully run an Ethernet cable from the outside of your house, providing access to the network connection inside. If you're looking for additional information or resources on running Ethernet cables, be sure to check out our featured videos up here.

**Featured Products**

Mass Drop is a great resource for finding deals on Ethernet cables and other networking equipment. They offer exclusive products that can't be found anywhere else, including the Mass Drop Fosx THX00 headphones. These headphones feature a closed-back design, 50mm dynamic transducers, mahogany wood and soft leatherette build quality, and are available for the lowest price ever seen at $399.99 on M drop. If you're interested in picking up a pair before they ship in September, be sure to act fast as only 540 pairs have been sold so far.

"WEBVTTKind: captionsLanguage: enif your house or your landlord's house isn't wired for networking there are a variety of ways to get an internet connection to the place where you need it power line WiFi the problem with these Solutions is that they're just not as good as a good oldfashioned cat 5e the problem with a good old fashion cat 5e is that sometimes it is nearly impossible to get it from where your internet connection comes into the house and your network switches to where you want it to be without creating either a tripping Hazard or in my case a wife Hazard Corsair boasts unrivaled comfort and Universal compatibility on its void surround headset featuring a genuine Dolby 7.1 headphone USB ad adapter click on the link in the video description to learn more so the objective today is to run an ethernet cable from my networking closet on the Second Story down to the first story where my media center and my TV are in order to eliminate the tripping and wife hazards though we're going to be taking it outside so to speak and running the ethernet cable along the siding on the outside of the house however before you embark on a project like this there are some considerations number one is mapping out where exactly your entry and exit wounds are going to be and we'll show you some simple tricks for how to find exactly the right spots to drill the next one is figuring out how long your run needs to be to find a balance between the shortest possible run which is always good for Signal integrity and optimizing your Aesthetics as well as the durability of the cable if your run goes way across a very sunny south-facing path it might not last as long even if you're using a UV rated exterior cable we'll show you how to Anchor your cable to wood as well as brick or concrete and finally we'll show you how we're terminating the jacks on both sides so it not only works well but looks professional let's begin with a rundown of everything we're going to need for our job today first of all we've got 100 ft of cat 5e cable that we paid about 50 bucks for why did we pay that much I'm glad you asked it's because this is outdoor rated cat 5e which means that if it is in direct sunlight it's not going to pretty much immediately break down the way that an indoor cable would next we've got the wiring diagram for our Twisted pairs as well as some RJ45 connectors to terminate both ends of the cable we've got a crimper to make that whole thing happen and then when it comes to actually putting holes in the house to run the cables through we've got an impact drill with a couple of bits so the larger one here and this is a 38 in bit is going to be for the cable itself and then we've got ourselves a uh cocking gun you know what job is complete without the to make sure that the hole seals and doesn't actually leak water into the house which would be bad and then we have a second bit and this puppy is a 3/16 inch bit and this one is for the plastic inserts that we're going to use to run our cable straps so these are little Cable Management Ties on the brick and car Concrete where needed in order to make our run nice and clean now we've also got some regular wood screws here these are just some Robertson head wood screws as well as some more straps for where we're running the cable along the wood and finally we've got ourselves an electric screwdriver as well as one of these handy dandy little mounting plates for where we're going to put the jack that is going to come out of the wall the one thing we are missing because we need to do a run to the store is a female to female piece that goes on here where we can run our terminated Jack into the back of it and then we can plug our Jack into the other side and run it to the TV or a network switch or whatever else as we went along we realized there were a few more things we needed a measuring tape a marking pencil a drywall saw a hammer and of course safety glasses now we know that the downstairs connection needs to go through this wall but if we were to measure it from the outside it would be easy to overlook things like that my living room has a sunken floor and we could end up at completely the wrong height or the wrong distance away from the wall so to make sure that we're drilling at the correct height we actually need to take things inside for our measurements so from in here we can decide exactly where it is that we want our Jack to come out so I'm kind of thinking a little off to the left of this power outlet right about there so the first thing we need to know is is the height so we go okay a standard wall Jack has its bottom about 12 in off the floor well exactly 12 in off the floor in a perfect world so we're going to aim for about 14 in here so we go ahead and make a little Mark on our wall at 14 in then we find a landmark that is common to both the inside and the outside of the house so in our case we can use the bottom of the glass on this window and measure that to our 14in Mark so it looks like about 19 and2 in the next thing we need to know is the distance along the wall fortunately once again we have an easy Landmark because we can actually see the brick on the outside of the house which is what we'll have to measure from when we're out there so doing some somewhat approximate yes this isn't quite perfect but is good enough for our purposes eyeballing we can line up the edge of our measuring tape with that brick and then kind of go okay we need to go across about oh I don't know 20 8 in so there you have it 19 1/2 down from the window 28 in over from the edge of the wall and we should pretty much hit that spot okay so now that we're out here we can see about 18 1/2 in down is right on this mortar line which is really handy cuz it means that as long as you've got brick or wood siding or something along those lines you can actually follow it along assuming that it is probably pretty level and then take your second measurement 28 in which and this is more good luck lands us right on this point right here so that means we can drill through mortar rather than the brick which is going to do less damage to the look of the wall and also has less of a chance of cracking something as you go through we can put our cable through and then run it right down here under this metal flashing and cable management along the concrete here at the bottom so then without further Ado we've got our drill set to the hammer drill setting bear in mind you don't necessarily have to have a big old rugged one like this a lot of just normal hand drills will have a hammer setting you can just check yours and it's Off to the Races actually our masonry bit didn't end up being long enough to punch through the plywood so we've got a spade bit here and while I could you know try to use my landm marking to make a hole on the other side exactly where this one is and if I measured perfectly that would work it's a little bit easier since I'm in here anyway to just punch through the drywall now and they'll know exactly where I made my hole from the outside so for the next step because we want a socket in there we're going to to expand the hole we made with a drywall saw to just the size of the perimeter of the inside of this wall plate then what we're going to do is screw the wall plate in which will make these little flanges here grip onto the drywall holding it into place this gives us somewhere to mount that plate that we're going to add later so with our hole complete we take one end of our ethernet cable and run it through the hole pretty self-explanatory now you're going to want to leave yourself a little bit of extra cable in the wall because the next step crimping the end onto the cable is the most likely reason that your cable run might not end up working so you want to have enough extra that you can cut off what you did and redo it so here we are with the cable on the other side and this won't be by any means the world's most comprehensive how to terminate your own ethernet cables guide but basically you strip the outer sheathing then because this is an outdoor cable there's going to be some goop in there don't worry about that you still as normal separate all your Twisted pairs align them in the correct order according to your diagram place them into the cutting tool on the crimper with the length such that you'll will have the outer sheathing sticking into the connector about this far then feed all the ends without any need to strip them insert the whole thing into the slotted part of the crimping tool crimp and remove it actually shouldn't take longer than a minute or so per end once you get the hang of it so the next step here is to break out that smaller masonry bit remember you won't need that if you're running along wood you can just use your screws and put them right into the siding for the cable straps but we're going to be using the masonry bit as well as our little plastic inserts to every 12 to 16 in or so Place one of our cable straps for a nice tight cable management line under the metal flashing so that it's not visible from a person's eye level then we're going to remove the down spout and run the cable up the corner where the down spout is making it other than the entry hole and a small hole up in the top of the sofit basically invisible someone up there oh hi ha well that worked out so now that we've got our wire in the wall we need to put some cocking in there to keep moisture from seeping in along the wire this will dry clear once we're done now if you were doing a project with a longer run it's possible that you would be stuck with more cable visible from the outside of the house but the limit is pretty much your own creativity here and the best practice is to generally speaking follow the lines of the house whether it's siding or whether it's a vertical you know end piece or finishing piece and keep it in Corners as much as possible okay oh so this is it home stretch we've got the wire out of the crawl space and all that's left to do is cut it to the appropriate length here there we go we're not going to bother with the you know nice wall mounted Jack or anything like that so I just got to crawl over here put it through that same hole that everything else is using you get this nice shot of my butt in the meantime I got it brunning so I got to pull this baby out here terminate it and that's it that's the Run that's running an ethernet cable on the outside of the house for a not only tier but crazy shorter run it turns out depending on where it is you're trying to get from and where it is you're trying to get to wasn't that fun learning how to do something for ourselves well you know what you can do for yourself get better deals on stuff over on massdrop massdrop makes the connection between manufacturers and authorized Distributors and customers they say hey if a bunch of you are willing to buy the same thing hey would you be willing to give them a sweet deal on it and we'll act as an intermediary here and make sure everyone gets their product and gets their money and that is how it works but recently they've actually branched out a little bit into exclusive products not just you know the same you know n headphones keyboards camping supplies that you can get just anywhere and the featured product today is the mass drop fosx thx00 these are the same ones that I actually reviewed way back here featuring a closed back design 50 mm Dynamic transducers they've got a mahogany wood and soft leatherette build quality and they're available for the lowest price I've seen yet $399.99 on M drop and if you want to grab a pair before they ship the second batch in September so like forever from now you will want to act fast 540 pairs are sold already so check them out at draw. l-x Linked In the video description so thanks for watching guys if you disliked this video hit that dislike button but if you liked it and hey maybe if you even want to see more of these kinds of you know Nery howto DIY videos then hit the like button get subscribed leave a comment with your suggest questions maybe for stuff you'd like to see and if you really liked it then maybe you'll want to support us by buying a cool shirt like this one changing your Amazon link to one with our affiliate code which you can find the instructions for which up here or even becoming a contributor through our community form you get a cool little contributor badge so thanks again for watching we'll see you guys next time oh yeah and if you're looking for something else to watch we've got one of our other featured videos up here which you can click the little eye in the corner and check out I guarantee you that one will be good too or if it's not good then that was a guarantee with an asterisk teif your house or your landlord's house isn't wired for networking there are a variety of ways to get an internet connection to the place where you need it power line WiFi the problem with these Solutions is that they're just not as good as a good oldfashioned cat 5e the problem with a good old fashion cat 5e is that sometimes it is nearly impossible to get it from where your internet connection comes into the house and your network switches to where you want it to be without creating either a tripping Hazard or in my case a wife Hazard Corsair boasts unrivaled comfort and Universal compatibility on its void surround headset featuring a genuine Dolby 7.1 headphone USB ad adapter click on the link in the video description to learn more so the objective today is to run an ethernet cable from my networking closet on the Second Story down to the first story where my media center and my TV are in order to eliminate the tripping and wife hazards though we're going to be taking it outside so to speak and running the ethernet cable along the siding on the outside of the house however before you embark on a project like this there are some considerations number one is mapping out where exactly your entry and exit wounds are going to be and we'll show you some simple tricks for how to find exactly the right spots to drill the next one is figuring out how long your run needs to be to find a balance between the shortest possible run which is always good for Signal integrity and optimizing your Aesthetics as well as the durability of the cable if your run goes way across a very sunny south-facing path it might not last as long even if you're using a UV rated exterior cable we'll show you how to Anchor your cable to wood as well as brick or concrete and finally we'll show you how we're terminating the jacks on both sides so it not only works well but looks professional let's begin with a rundown of everything we're going to need for our job today first of all we've got 100 ft of cat 5e cable that we paid about 50 bucks for why did we pay that much I'm glad you asked it's because this is outdoor rated cat 5e which means that if it is in direct sunlight it's not going to pretty much immediately break down the way that an indoor cable would next we've got the wiring diagram for our Twisted pairs as well as some RJ45 connectors to terminate both ends of the cable we've got a crimper to make that whole thing happen and then when it comes to actually putting holes in the house to run the cables through we've got an impact drill with a couple of bits so the larger one here and this is a 38 in bit is going to be for the cable itself and then we've got ourselves a uh cocking gun you know what job is complete without the to make sure that the hole seals and doesn't actually leak water into the house which would be bad and then we have a second bit and this puppy is a 3/16 inch bit and this one is for the plastic inserts that we're going to use to run our cable straps so these are little Cable Management Ties on the brick and car Concrete where needed in order to make our run nice and clean now we've also got some regular wood screws here these are just some Robertson head wood screws as well as some more straps for where we're running the cable along the wood and finally we've got ourselves an electric screwdriver as well as one of these handy dandy little mounting plates for where we're going to put the jack that is going to come out of the wall the one thing we are missing because we need to do a run to the store is a female to female piece that goes on here where we can run our terminated Jack into the back of it and then we can plug our Jack into the other side and run it to the TV or a network switch or whatever else as we went along we realized there were a few more things we needed a measuring tape a marking pencil a drywall saw a hammer and of course safety glasses now we know that the downstairs connection needs to go through this wall but if we were to measure it from the outside it would be easy to overlook things like that my living room has a sunken floor and we could end up at completely the wrong height or the wrong distance away from the wall so to make sure that we're drilling at the correct height we actually need to take things inside for our measurements so from in here we can decide exactly where it is that we want our Jack to come out so I'm kind of thinking a little off to the left of this power outlet right about there so the first thing we need to know is is the height so we go okay a standard wall Jack has its bottom about 12 in off the floor well exactly 12 in off the floor in a perfect world so we're going to aim for about 14 in here so we go ahead and make a little Mark on our wall at 14 in then we find a landmark that is common to both the inside and the outside of the house so in our case we can use the bottom of the glass on this window and measure that to our 14in Mark so it looks like about 19 and2 in the next thing we need to know is the distance along the wall fortunately once again we have an easy Landmark because we can actually see the brick on the outside of the house which is what we'll have to measure from when we're out there so doing some somewhat approximate yes this isn't quite perfect but is good enough for our purposes eyeballing we can line up the edge of our measuring tape with that brick and then kind of go okay we need to go across about oh I don't know 20 8 in so there you have it 19 1/2 down from the window 28 in over from the edge of the wall and we should pretty much hit that spot okay so now that we're out here we can see about 18 1/2 in down is right on this mortar line which is really handy cuz it means that as long as you've got brick or wood siding or something along those lines you can actually follow it along assuming that it is probably pretty level and then take your second measurement 28 in which and this is more good luck lands us right on this point right here so that means we can drill through mortar rather than the brick which is going to do less damage to the look of the wall and also has less of a chance of cracking something as you go through we can put our cable through and then run it right down here under this metal flashing and cable management along the concrete here at the bottom so then without further Ado we've got our drill set to the hammer drill setting bear in mind you don't necessarily have to have a big old rugged one like this a lot of just normal hand drills will have a hammer setting you can just check yours and it's Off to the Races actually our masonry bit didn't end up being long enough to punch through the plywood so we've got a spade bit here and while I could you know try to use my landm marking to make a hole on the other side exactly where this one is and if I measured perfectly that would work it's a little bit easier since I'm in here anyway to just punch through the drywall now and they'll know exactly where I made my hole from the outside so for the next step because we want a socket in there we're going to to expand the hole we made with a drywall saw to just the size of the perimeter of the inside of this wall plate then what we're going to do is screw the wall plate in which will make these little flanges here grip onto the drywall holding it into place this gives us somewhere to mount that plate that we're going to add later so with our hole complete we take one end of our ethernet cable and run it through the hole pretty self-explanatory now you're going to want to leave yourself a little bit of extra cable in the wall because the next step crimping the end onto the cable is the most likely reason that your cable run might not end up working so you want to have enough extra that you can cut off what you did and redo it so here we are with the cable on the other side and this won't be by any means the world's most comprehensive how to terminate your own ethernet cables guide but basically you strip the outer sheathing then because this is an outdoor cable there's going to be some goop in there don't worry about that you still as normal separate all your Twisted pairs align them in the correct order according to your diagram place them into the cutting tool on the crimper with the length such that you'll will have the outer sheathing sticking into the connector about this far then feed all the ends without any need to strip them insert the whole thing into the slotted part of the crimping tool crimp and remove it actually shouldn't take longer than a minute or so per end once you get the hang of it so the next step here is to break out that smaller masonry bit remember you won't need that if you're running along wood you can just use your screws and put them right into the siding for the cable straps but we're going to be using the masonry bit as well as our little plastic inserts to every 12 to 16 in or so Place one of our cable straps for a nice tight cable management line under the metal flashing so that it's not visible from a person's eye level then we're going to remove the down spout and run the cable up the corner where the down spout is making it other than the entry hole and a small hole up in the top of the sofit basically invisible someone up there oh hi ha well that worked out so now that we've got our wire in the wall we need to put some cocking in there to keep moisture from seeping in along the wire this will dry clear once we're done now if you were doing a project with a longer run it's possible that you would be stuck with more cable visible from the outside of the house but the limit is pretty much your own creativity here and the best practice is to generally speaking follow the lines of the house whether it's siding or whether it's a vertical you know end piece or finishing piece and keep it in Corners as much as possible okay oh so this is it home stretch we've got the wire out of the crawl space and all that's left to do is cut it to the appropriate length here there we go we're not going to bother with the you know nice wall mounted Jack or anything like that so I just got to crawl over here put it through that same hole that everything else is using you get this nice shot of my butt in the meantime I got it brunning so I got to pull this baby out here terminate it and that's it that's the Run that's running an ethernet cable on the outside of the house for a not only tier but crazy shorter run it turns out depending on where it is you're trying to get from and where it is you're trying to get to wasn't that fun learning how to do something for ourselves well you know what you can do for yourself get better deals on stuff over on massdrop massdrop makes the connection between manufacturers and authorized Distributors and customers they say hey if a bunch of you are willing to buy the same thing hey would you be willing to give them a sweet deal on it and we'll act as an intermediary here and make sure everyone gets their product and gets their money and that is how it works but recently they've actually branched out a little bit into exclusive products not just you know the same you know n headphones keyboards camping supplies that you can get just anywhere and the featured product today is the mass drop fosx thx00 these are the same ones that I actually reviewed way back here featuring a closed back design 50 mm Dynamic transducers they've got a mahogany wood and soft leatherette build quality and they're available for the lowest price I've seen yet $399.99 on M drop and if you want to grab a pair before they ship the second batch in September so like forever from now you will want to act fast 540 pairs are sold already so check them out at draw. l-x Linked In the video description so thanks for watching guys if you disliked this video hit that dislike button but if you liked it and hey maybe if you even want to see more of these kinds of you know Nery howto DIY videos then hit the like button get subscribed leave a comment with your suggest questions maybe for stuff you'd like to see and if you really liked it then maybe you'll want to support us by buying a cool shirt like this one changing your Amazon link to one with our affiliate code which you can find the instructions for which up here or even becoming a contributor through our community form you get a cool little contributor badge so thanks again for watching we'll see you guys next time oh yeah and if you're looking for something else to watch we've got one of our other featured videos up here which you can click the little eye in the corner and check out I guarantee you that one will be good too or if it's not good then that was a guarantee with an asterisk te\n"