Phanteks Just Can't Stop Winning _ Computex 2024
# Computex 2024: Fantex Showcases Innovative Products at Their Booth
## Introduction
The Computex 2024 show has kicked off, and once again, it’s a must-attend event for tech enthusiasts, gamers, and hardware aficionados. This year, the Fantex booth is making waves with their lineup of cutting-edge products designed to push the boundaries of PC building and cooling solutions. From sleek midtower cases to futuristic RGB ecosystems and innovative cooling systems, Fantex is bringing some exciting new gear to the table.
In this article, we’ll take a deep dive into the highlights from the Fantex booth at Computex 2024. We’ll explore their latest offerings in detail, ensuring you get the full picture of what they’ve got to showcase. Let’s start by checking out their standout cases and accessories.
---
## The Eclipse G400A: A Midtower Case with Modern Design
The first product we’re looking at is the **Eclipse G400A**, a midtower case that immediately catches your eye with its sleek design and attention to detail.
One of the standout features of the G400A is its new **fine mesh front panel**. This panel has a brick-style, layered design that not only looks elegant but also improves airflow compared to previous models. The design allows for additional air circulation while maintaining a clean aesthetic. Underneath this front panel, there’s another fine mesh panel for filtration, ensuring that your build stays cool and dust-free.
The G400A supports **340 mm fans**, which means it can accommodate larger cooling solutions without compromising on airflow efficiency. The case is designed to be completely sealed, allowing you to maximize the performance of its included 140 mm fans. Four fans are included with the case: three at the front and one at the rear.
The interior of the G400A is spacious, offering **360 mm radiator support** at both the top and bottom. This makes it a versatile choice for water-cooling enthusiasts. On the right side, the case features a solid panel that can be upgraded to tempered glass with the G400N variant, providing an even more premium look.
The G400A is available in **black and white**, and its MSRP is set at **$100 USD**. For those looking for a glass side panel upgrade, the **G400N** is priced at **$130 USD**. Both cases are expected to release soon.
---
## The Evolve X2: A Compact, High-End Case with Wraparound Glass
Next up is the **Evolve X2**, a case that’s been generating a lot of buzz. It’s hard to believe just how sleek and compact this build is when you see it in person—especially after seeing photos online that made it seem larger than life.
The X2 features wraparound glass on three sides, offering a stunning view of your components. The design focuses heavily on seamless integration, particularly with **BTF (Build Transformer) Project Zero motherboards**, which are designed to eliminate cable clutter. This case truly shows off the potential of these next-gen motherboards, making them look cleaner and more modern than ever before.
The X2 supports **three 120 mm fans** at the bottom, which are recessed for a flush installation. These fans are not quite flush due to their thickness (30 mm), but they still maintain a sleek appearance. The top of the case features a radiator and fan arrangement that’s fully integrated into the design, making it look clean and professional.
One of the standout features of the X2 is its **cable management tray**, which allows you to neatly organize your cables behind the glass panel. This adds to the overall aesthetic while keeping everything tidy.
The case comes in two color options: a silver aluminum finish or gold, both of which look stunning. The MSRP for the X2 is set at **$1150 USD**, which is remarkably affordable given its premium design and features. It’s expected to release in Q4 2024.
---
## NextLink RGB Ecosystem: A Daisy-Chaining Solution
Fantex has also introduced their new **NextLink RGB ecosystem**, a game-changing solution for enthusiasts who love customizable lighting. This system allows you to connect multiple devices (fans, radiators, etc.) using a single cable, simplifying the setup process and reducing clutter.
The ecosystem includes the **M25 G2 fans**, which are designed to be more affordable than previous models while still maintaining a sleek appearance. These fans come in both 120 mm and 140 mm sizes and are available in black or white. A set of three fans retails for around **$30 USD**, making them a cost-effective choice for lighting enthusiasts.
The NextLink system also includes an optional **hub** that supports two ports, each capable of powering up to a dozen devices. This hub is compatible with both the new M25 G2 fans and legacy D30 models, ensuring compatibility with older setups. The hub’s design allows you to sync all connected devices through Fantex’s software or even Windows Dynamic Lighting, giving you full control over your RGB setup.
---
## Glacier Easy-Fit System: Revolutionizing Water Cooling
Finally, no visit to the Fantex booth would be complete without checking out their **Glacier Easy-Fit system**, a groundbreaking solution for water cooling enthusiasts.
The Glacier Easy-Fit system eliminates the need for traditional fittings by using a innovative locking mechanism that holds your tubing in place with just a push. This not only makes installation easier but also ensures a completely leak-free setup. The system is compatible with both hardline and soft tubing, giving you flexibility depending on your preference.
The Glacier Easy-Fit system includes two kits:
- **Soft Tube Kit**: Includes all the necessary components for a complete build, priced at **$399 USD**.
- **Hard Tube Kit**: Adds 16 mm frosted satin tubing to the soft tube kit, retailing for **$499 USD**.
Both kits come with three D30 fans and are set to release in Q3 2024. The system also features a sleek design with black or white options, making it easy to match your build’s aesthetic.
---
## Conclusion
This year at Computex 2024, Fantex has proven once again that they’re a force to be reckoned with in the PC hardware space. From their innovative cases to their cutting-edge cooling solutions and RGB ecosystems, there’s something for everyone here. Whether you’re building a compact gaming rig or a full-scale water-cooled powerhouse, Fantex has got you covered.
For more details on these products and others from Computex 2024, make sure to check out the links in the description below. Stay tuned for more coverage from the event—there’s still plenty to see!
"WEBVTTKind: captionsLanguage: enmy coverage of computex 2024 is brought to you by antec Asus Corsair and Gill to learn more about all their new products check out the links in the description below what's going on guys welcome back to my coverage of compex 2024 I'm here at the fantex booth they've got a lot to show off let me show you guys what's in store starting with the eclipse g400 a this is a midtower case and right off the bat you can tell they're using a new fine mesh front panel which actually looks really nice it's like a brick style brick layered design which is super fine this was the old style mesh that they're still using for the top that was used on the p400a but this new design allows for additional airf flow and if you take that off you can see there's actually another fine mesh panel right here it's so fine in fact that it almost looks like it's not there you almost don't see it but there is a super fine mesh panel beneath that for additional filtration 340 mm fans so they've actually closed off all of the gaps now this this case only accommodates 140 mm fans at the front but that is by Design if they had those flexible mounting strips for you know 120 mm fans and that would create a lot more gaps and a lot more loss of air flow right it wouldn't be completely sealed this is very nicely sealed so that you're actually getting 100% maximum throughput for for the fans that are here and uh there are going to be four fans included with the case the three at the front as well as the 1 140 at the back you can see there's a spacious cavernous interior we've got 360 mm radiar support at the top now and now on the bottom here we've got another 360 mm fan Arrangement if we come over to the right side here you can see that we've got a uh just a solid side panel that is actually going to be upgraded to a glass panel with the g400 N you still get those four 140 mm fans included but you also have a tempered glass right panel as well so both sides are now glass and it also includes nice little Cable Management Mount or cable management tray I suppose you could call it that's going to go right here and that'll show off the cables very nicely through that glass panel available in black and white the g400 N is going to R s for 130 I think is what they're talking about right now USD and $100 for the g400 a moving on to this beauty this is the X2 the Evolve X2 uh this might be my favorite thing at this booth not saying a lot because there's a lot of cool stuff here this case is beautiful I mean it the the the video does not do it justice I saw a photo that Demetri from Hardware conect posted yesterday and I was like that looks gorgeous but it just looks way too big for my taste and seeing it in person it actually is a lot smaller with a much smaller footprint than you would expect it's which which I actually love because now there's there's more possibilities of where I could actually put this now already imagining what which of my desk setups this is going to go on um it's it's amazing it's got this wraparound view as you can see glass on three sides all the way in the back Cable Management uh tray right here just making it absolutely perfect I love how the fans are recessed the bottom we've got three 120 mm fans they are not quite flush because these are actually 30 mm thick but for a stand standard 25 mm fan they will be completely flush with the bottom and this still looks good they they just Fant takes want to use their own fans and plus they have this uh this bit of LED on the sides that that looks really good so it actually makes sense that they're elevated here but I think this is a great design because often times the top surface is the most alluring the most aesthetic part of a fan right it's the part you really want to see the sides are kind of an isore most of the time for most fans this is just a really clean almost like futuristic look I love how seamless everything is especially because this also supports uh BTF project zero motherboards all those cable free boards as you can see and I think this case really is is sort of addressing this new wave of of motherboards and cable free seamless everything this is the first case that I've actually seen these motherboards look this good in if I'm being perfectly honest I think there I think fantex is on the right track here the fans at the top also blend in perfectly seamless there is a radiator in there as you can see the two is even is even covered up everything is just tucked away very nice and neat they have removable brackets on the top and bottom so that you can easily Mount the radiators and fan assembly into the case fans won't be included so you can add whichever design that you like gives you that flexibility and right now fantex is playing around with color options maybe you guys can help them with this this is obviously a silver we've got sort of an aluminum inner case right that uh that you can see here that's that's actually inside it's behind the glass and then over here they have the same one but in gold as gold finish I think both designs look really nice I'm personally a fan of the silver that could be just because they already have a fully functioning build showing it off whereas I kind of have to use more my my imagination here but you guys let me know what what uh which one you prefer and obviously I think they're they're also talking about going fully blacked out as well right now fantex is talking about an MSRP of $1150 for this case which I think is an absolute steal just for how phenomenal it looks how you ique the design is how well thought thought out this is I was expecting 200 250 to be honest with Case Case figures case prices these days 150 very reasonable and they're shooting for Q4 uh release of this year stay tuned for the X2 next up is their next link ecosystem this is an RGB ecosystem with a bunch of new products that are very exciting so uh the overarching idea here is that they've got this new interconnect right so they've got a hub this is an optional Hub but it allows you to connect a bunch of different devices over a single cable obviously daisy chaining things is all the rage these days but even with a lot of daisy chaining ecosystems you still have one cable for power and one for data or RGB this is just a single cable all right so we we've got these new fans these are the the M25 g2s they kind of look similar to the d30s actually but they're going to be a bit more simplified in their design and a lot cheaper because of it so they still look fantastic they still have these caps on here where but instead of the uh the covers that the the D30 had the uh the inlink covers the caps on the sides now we just have a simple screw the screw design that's going to cut down the cost significantly while still looking really nice these are going to be offered in both just regular and reverse blades that we saw on the uh the g400 N over there the center here is the infinity mirror design which looks really classy with all the the rest of the LEDs on the blades and it's going to be available in 120 and 140 mm varieties in black and white they were saying like 30 for three of them I think a single fan from competing name which I won't mention like $50 like $50 is not uncommon to see for a single RGB fan that's you know obviously Daisy chainable and has all this new technology which is great but I mean just realistically who's going to spend $400 on you know a case full of fans it's just absurd so um these are coming in at around $30 for three fans $10 a piece so here's a look at the other side of the fans where you can see that single cable just daisy chaining them together that can connect to other nextlink devices like this AO so we've got the glacier 1 M25 G2 uh I really like this AO it's going to be around $130 they're talking about $129.99 USD which I think is a very fair price for this 360 mm unit that same fine mesh that same brick layer style mesh is on the front because we actually have a little fan for active cooling aha nice little fan here this is actually going to be cooling the vrm and the power delivery of the motherboard you can see that there's like these ducks that kind of shoot outward and that's just to help direct the airf flow towards the power delivery of your motherboard uh this is sort of what it looks like on in Black again also available I think all the stuff is available black or white and then we also have um the uh I thought they just like went over to the Le and Lee booth and stole this but this is theirs this is their design they have their own kind of a streamer cable there's no name for this yet there's no name for this maybe you guys can help them out but the way that the le le streamer one is is it's sort of just like a cover right like the LEDs just kind of go over the cables but this is actually integrated this is this is actually not a uh not just an extension but it's a full-blown power supply cable that's compatible with both the uh the amp and Revolt power supplies from fantex but it also adds a more seamless design the cables are actually in between each of the LED strips so it's actually built in it's a lot more seamless than uh than the streamer is this is also going to be compatible this is a nextlink product so you can see that same it's a six pin they're using a six pin connector one thing I forgot to mention about the g400 N is that it ALS Al includes one of these hubs this nextlink Hub which you can see here has two ports on it that support that six that six pin connector and I believe they were saying that each port on a single cable can can wire up and Power about a dozen devices they're saying maybe 11 or 12 so I mean you're talking about a couple dozen maybe 24 devices with both ports which is more than enough I think for most users out there even if you have a massive full tower case um that's fully loaded there's also a legacy Port so you can still connect the existing D30 fans to that Hub and it's all synchronized it can be synchronized a multitude of ways fantech software for the longest time fantex hasn't had software which always felt better sweet CU I was like oh it'd be cool to have a software to control fantex products but also every RGB software I've ever encountered has been hot garbage so um it was a bit of a a double-edged sword but this looks very promising so far this is obviously just a beta Beta app but um they they just tried to simplify everything so it's super easy for you to use it's just giving you the Basic Essentials and also just options so you can see here that you can choose whatever input source you want to use to control all of those devices whether it's this this uh the fantech software you can use the the motherboard of course connect directly and you can even use Windows Dynamic lighting which is not something that you see too often but if you don't want to deal with any RGB software whatsoever you can just deal with it straight through windows and free up some resources that way next up dude this is pretty exciting the glacier easy fit system that that fantex just dropped is is actually pretty cool I'm going to have to do a build with all this stuff basically they've found a way to fix fittings I'm actually going to have my friend over here demonstrate so this is this is just a this is just a demo piece right but the fittings on these these blocks on these blocks and the pump reservoir they're actually built in and it's got this new like sort of I guess you would call it a tool system more or less where you can just take a Hardline tube or a soft tube 16 mm and just stick it in and that's it like it it will not come out it's actually using a similar fitting system that uh I think they said like some sometimes is used in plumbing but it's basically that's it you just shove it in and it doesn't come out it's got these little teeth you can sort of see the teeth on the inside that lock it into place and there's no screwing whatsoever the only thing you got to do is when you want to remove it you simply just push it down you push down that ring and it pops out just like that and it's completely sealed no leaks whatsoever it's it's crazy and these are built in they don't they don't need to be removed you don't have to remove them so here's here's just a look at some of the things they offer 360 mm Brad nice and slim for high compatibility is there a name for these fittings just easy fit easy fit easy fit fittings built right in and then they've also got the the pump res D5 pump think this is said third gen gen 3 D5 pump with the the built-in fitting someone someone stole one we've got a thief on the loose I'm sure we'll uh we'll get to the bottom of that right after this video and then the GP block as well which see right there boom you're like wait wait Kyle why are those why are those fittings Chrome it's because this is the White Version bruh they got black and white that looks so clean and then this is going to be offered in uh a couple different kits so um both kits are actually going to include the 360 mm radiator CPU block here's another look at the CPU block right there beautiful and the pump rest all right there's a soft tube and a hard tube kit the soft tube is going to come with all three of these plus soft tubing the hard tube kit same thing except you also get some 16 mm uh frosted frosted satin tube like this that comes included along with all the tools that you need to cut the tubing forgot to mention the hard tube kit also comes included with three D30 fans we're sated for a Q3 release of both of these kits for $3.99 and $4.99 respectively the GPU block is not included as you me as I mentioned earlier in either of those kits but you can purchase it separately um and all these all these items can actually be purchased all a cart if you so choose but the kit just makes it super easy so you don't even have to think about what fittings are going to go with what uh what's compatible it's just sort of a a no-brainer if you well all right guys that's going to conclude my coverage of fantex for compex 2024 thank you so much for watching this video make sure you stay tuned and get subscribed for more content coming from the event very soon I will see you guys in the next onemy coverage of computex 2024 is brought to you by antec Asus Corsair and Gill to learn more about all their new products check out the links in the description below what's going on guys welcome back to my coverage of compex 2024 I'm here at the fantex booth they've got a lot to show off let me show you guys what's in store starting with the eclipse g400 a this is a midtower case and right off the bat you can tell they're using a new fine mesh front panel which actually looks really nice it's like a brick style brick layered design which is super fine this was the old style mesh that they're still using for the top that was used on the p400a but this new design allows for additional airf flow and if you take that off you can see there's actually another fine mesh panel right here it's so fine in fact that it almost looks like it's not there you almost don't see it but there is a super fine mesh panel beneath that for additional filtration 340 mm fans so they've actually closed off all of the gaps now this this case only accommodates 140 mm fans at the front but that is by Design if they had those flexible mounting strips for you know 120 mm fans and that would create a lot more gaps and a lot more loss of air flow right it wouldn't be completely sealed this is very nicely sealed so that you're actually getting 100% maximum throughput for for the fans that are here and uh there are going to be four fans included with the case the three at the front as well as the 1 140 at the back you can see there's a spacious cavernous interior we've got 360 mm radiar support at the top now and now on the bottom here we've got another 360 mm fan Arrangement if we come over to the right side here you can see that we've got a uh just a solid side panel that is actually going to be upgraded to a glass panel with the g400 N you still get those four 140 mm fans included but you also have a tempered glass right panel as well so both sides are now glass and it also includes nice little Cable Management Mount or cable management tray I suppose you could call it that's going to go right here and that'll show off the cables very nicely through that glass panel available in black and white the g400 N is going to R s for 130 I think is what they're talking about right now USD and $100 for the g400 a moving on to this beauty this is the X2 the Evolve X2 uh this might be my favorite thing at this booth not saying a lot because there's a lot of cool stuff here this case is beautiful I mean it the the the video does not do it justice I saw a photo that Demetri from Hardware conect posted yesterday and I was like that looks gorgeous but it just looks way too big for my taste and seeing it in person it actually is a lot smaller with a much smaller footprint than you would expect it's which which I actually love because now there's there's more possibilities of where I could actually put this now already imagining what which of my desk setups this is going to go on um it's it's amazing it's got this wraparound view as you can see glass on three sides all the way in the back Cable Management uh tray right here just making it absolutely perfect I love how the fans are recessed the bottom we've got three 120 mm fans they are not quite flush because these are actually 30 mm thick but for a stand standard 25 mm fan they will be completely flush with the bottom and this still looks good they they just Fant takes want to use their own fans and plus they have this uh this bit of LED on the sides that that looks really good so it actually makes sense that they're elevated here but I think this is a great design because often times the top surface is the most alluring the most aesthetic part of a fan right it's the part you really want to see the sides are kind of an isore most of the time for most fans this is just a really clean almost like futuristic look I love how seamless everything is especially because this also supports uh BTF project zero motherboards all those cable free boards as you can see and I think this case really is is sort of addressing this new wave of of motherboards and cable free seamless everything this is the first case that I've actually seen these motherboards look this good in if I'm being perfectly honest I think there I think fantex is on the right track here the fans at the top also blend in perfectly seamless there is a radiator in there as you can see the two is even is even covered up everything is just tucked away very nice and neat they have removable brackets on the top and bottom so that you can easily Mount the radiators and fan assembly into the case fans won't be included so you can add whichever design that you like gives you that flexibility and right now fantex is playing around with color options maybe you guys can help them with this this is obviously a silver we've got sort of an aluminum inner case right that uh that you can see here that's that's actually inside it's behind the glass and then over here they have the same one but in gold as gold finish I think both designs look really nice I'm personally a fan of the silver that could be just because they already have a fully functioning build showing it off whereas I kind of have to use more my my imagination here but you guys let me know what what uh which one you prefer and obviously I think they're they're also talking about going fully blacked out as well right now fantex is talking about an MSRP of $1150 for this case which I think is an absolute steal just for how phenomenal it looks how you ique the design is how well thought thought out this is I was expecting 200 250 to be honest with Case Case figures case prices these days 150 very reasonable and they're shooting for Q4 uh release of this year stay tuned for the X2 next up is their next link ecosystem this is an RGB ecosystem with a bunch of new products that are very exciting so uh the overarching idea here is that they've got this new interconnect right so they've got a hub this is an optional Hub but it allows you to connect a bunch of different devices over a single cable obviously daisy chaining things is all the rage these days but even with a lot of daisy chaining ecosystems you still have one cable for power and one for data or RGB this is just a single cable all right so we we've got these new fans these are the the M25 g2s they kind of look similar to the d30s actually but they're going to be a bit more simplified in their design and a lot cheaper because of it so they still look fantastic they still have these caps on here where but instead of the uh the covers that the the D30 had the uh the inlink covers the caps on the sides now we just have a simple screw the screw design that's going to cut down the cost significantly while still looking really nice these are going to be offered in both just regular and reverse blades that we saw on the uh the g400 N over there the center here is the infinity mirror design which looks really classy with all the the rest of the LEDs on the blades and it's going to be available in 120 and 140 mm varieties in black and white they were saying like 30 for three of them I think a single fan from competing name which I won't mention like $50 like $50 is not uncommon to see for a single RGB fan that's you know obviously Daisy chainable and has all this new technology which is great but I mean just realistically who's going to spend $400 on you know a case full of fans it's just absurd so um these are coming in at around $30 for three fans $10 a piece so here's a look at the other side of the fans where you can see that single cable just daisy chaining them together that can connect to other nextlink devices like this AO so we've got the glacier 1 M25 G2 uh I really like this AO it's going to be around $130 they're talking about $129.99 USD which I think is a very fair price for this 360 mm unit that same fine mesh that same brick layer style mesh is on the front because we actually have a little fan for active cooling aha nice little fan here this is actually going to be cooling the vrm and the power delivery of the motherboard you can see that there's like these ducks that kind of shoot outward and that's just to help direct the airf flow towards the power delivery of your motherboard uh this is sort of what it looks like on in Black again also available I think all the stuff is available black or white and then we also have um the uh I thought they just like went over to the Le and Lee booth and stole this but this is theirs this is their design they have their own kind of a streamer cable there's no name for this yet there's no name for this maybe you guys can help them out but the way that the le le streamer one is is it's sort of just like a cover right like the LEDs just kind of go over the cables but this is actually integrated this is this is actually not a uh not just an extension but it's a full-blown power supply cable that's compatible with both the uh the amp and Revolt power supplies from fantex but it also adds a more seamless design the cables are actually in between each of the LED strips so it's actually built in it's a lot more seamless than uh than the streamer is this is also going to be compatible this is a nextlink product so you can see that same it's a six pin they're using a six pin connector one thing I forgot to mention about the g400 N is that it ALS Al includes one of these hubs this nextlink Hub which you can see here has two ports on it that support that six that six pin connector and I believe they were saying that each port on a single cable can can wire up and Power about a dozen devices they're saying maybe 11 or 12 so I mean you're talking about a couple dozen maybe 24 devices with both ports which is more than enough I think for most users out there even if you have a massive full tower case um that's fully loaded there's also a legacy Port so you can still connect the existing D30 fans to that Hub and it's all synchronized it can be synchronized a multitude of ways fantech software for the longest time fantex hasn't had software which always felt better sweet CU I was like oh it'd be cool to have a software to control fantex products but also every RGB software I've ever encountered has been hot garbage so um it was a bit of a a double-edged sword but this looks very promising so far this is obviously just a beta Beta app but um they they just tried to simplify everything so it's super easy for you to use it's just giving you the Basic Essentials and also just options so you can see here that you can choose whatever input source you want to use to control all of those devices whether it's this this uh the fantech software you can use the the motherboard of course connect directly and you can even use Windows Dynamic lighting which is not something that you see too often but if you don't want to deal with any RGB software whatsoever you can just deal with it straight through windows and free up some resources that way next up dude this is pretty exciting the glacier easy fit system that that fantex just dropped is is actually pretty cool I'm going to have to do a build with all this stuff basically they've found a way to fix fittings I'm actually going to have my friend over here demonstrate so this is this is just a this is just a demo piece right but the fittings on these these blocks on these blocks and the pump reservoir they're actually built in and it's got this new like sort of I guess you would call it a tool system more or less where you can just take a Hardline tube or a soft tube 16 mm and just stick it in and that's it like it it will not come out it's actually using a similar fitting system that uh I think they said like some sometimes is used in plumbing but it's basically that's it you just shove it in and it doesn't come out it's got these little teeth you can sort of see the teeth on the inside that lock it into place and there's no screwing whatsoever the only thing you got to do is when you want to remove it you simply just push it down you push down that ring and it pops out just like that and it's completely sealed no leaks whatsoever it's it's crazy and these are built in they don't they don't need to be removed you don't have to remove them so here's here's just a look at some of the things they offer 360 mm Brad nice and slim for high compatibility is there a name for these fittings just easy fit easy fit easy fit fittings built right in and then they've also got the the pump res D5 pump think this is said third gen gen 3 D5 pump with the the built-in fitting someone someone stole one we've got a thief on the loose I'm sure we'll uh we'll get to the bottom of that right after this video and then the GP block as well which see right there boom you're like wait wait Kyle why are those why are those fittings Chrome it's because this is the White Version bruh they got black and white that looks so clean and then this is going to be offered in uh a couple different kits so um both kits are actually going to include the 360 mm radiator CPU block here's another look at the CPU block right there beautiful and the pump rest all right there's a soft tube and a hard tube kit the soft tube is going to come with all three of these plus soft tubing the hard tube kit same thing except you also get some 16 mm uh frosted frosted satin tube like this that comes included along with all the tools that you need to cut the tubing forgot to mention the hard tube kit also comes included with three D30 fans we're sated for a Q3 release of both of these kits for $3.99 and $4.99 respectively the GPU block is not included as you me as I mentioned earlier in either of those kits but you can purchase it separately um and all these all these items can actually be purchased all a cart if you so choose but the kit just makes it super easy so you don't even have to think about what fittings are going to go with what uh what's compatible it's just sort of a a no-brainer if you well all right guys that's going to conclude my coverage of fantex for compex 2024 thank you so much for watching this video make sure you stay tuned and get subscribed for more content coming from the event very soon I will see you guys in the next one\n"