Animated Boot Logo for iPhone 4, iPod touch 4G and iPad On iOS 4.3.1 Using redsn0w 0.9.6rc12

**A Step-by-Step Guide to Jailbreaking Your iPhone**

In this tutorial, we will walk you through the process of jailbreaking your iPhone, iPod Touch, or iPad on iOS 4.3.1. Please note that you should have your device plugged into your computer and be sure it is turned off.

**Step 1: Prepare the Jailbreak Data**

Once you have identified the correct IPSW file for your device, click "Next" to prepare the jailbreak data. This process will take a few moments to complete.

**Warning: Back Up Your Device**

Before proceeding, make sure that all of your important data is backed up on iTunes. While the jailbreak process is designed to be safe, there's always a chance that something could go wrong.

**Step 2: Choose Your Options**

Once the preparation process is complete, you will see a few options to choose from:

* If this is your first time jailbreaking, make sure "Install Cydia" is checked.

* If you have already installed Cydia and jailbroken before, uncheck the box to prevent overwriting any existing settings.

You may also see additional options such as custom bundle and others. For now, focus on making sure that "Allow Boot Animation" is selected.

**Step 3: Put Your Device into DFU Mode**

Next, we need to put your device into DFU mode. To do this:

1. Turn off your iPhone by holding the power button until the screen goes dark.

2. Wait until the pin wheel has stopped spinning. This may take a few seconds or up to a minute.

Once your device is in DFU mode, you can proceed with the jailbreak process.

**Step 4: Hold the Power and Home Buttons**

Hold the power and home buttons for 10 seconds. Release the power button but continue holding the home button until the device says "Hello" from Redsn0w.

**Step 5: Wait for the Jailbreak to Complete**

Once you have put your device into DFU mode, Redsn0w will do its magic. This may take a few moments, so be patient and wait for the process to complete.

**What's Next?**

After the jailbreak is complete, you should see Cydia on your device. If you already had Cydia installed before the jailbreak, you won't notice any difference. However, you can now download animated boot logos from Cydia!

That concludes our step-by-step guide to jailbreaking your iPhone on iOS 4.3.1. If you have any questions or comments, feel free to leave them in the comment section below. Don't forget to subscribe for more jailbreaking content!

WEBVTTKind: captionsLanguage: entoday I'm here with a tutorial showing you how to enable animated boot logos on your iPhone iPod touch or iPad now the way we're going to be using this is red snow now this is the updated version of Red Snow from a few days ago when I showed you guys the tutorial so if you've already Run Red Snow and no we're going to keep that but if you've already Run Red Snow then you don't have anything to worry about you can just rerun this over the top of it and all it will do is enable animated boot logos so if you've already done that you're good to go um otherwise I will give you guys a quick tutorial showing you how to jailbreak uh really simply as always you need to uh hook your iPod iPhone or iPad into the computer and let it back up through iTunes uh now this is uh compatible with all the same devices from the previous jailbreak so it means the iPod Touch third and fourth generation the iPhone 3GS iPhone 4 and the iPad 1 this does not support the iPad 2 yet there's another jail bre coming for you guys so if you have an iPad 2 just hang tight for a little bit longer so let's go ahead and get this started so the to two things we're going to need as the ipsw for our device um this should be pretty simple especially if you just did the Red Snow jailbreak You' probably already got it hanging around if not check out the link in the description I will have a link showing you how to find it or download it whichever you need to do you also need to download red snow which of course will also be in the description so if you're on Windows it's going to be really simple you need to right click the red snow program and click on properties then you need to come over to the compatibility Tab and have it run this program in compatibility mode for Windows XP Service Pack 3 uh now I did have a couple of questions from last time uh now XP Service Pack 3 is what works best for me however if that's not showing on your uh operating system or anything like that feel free to try a different one it should work the same way you can just experiment around worst case scenario it just doesn't work and you just have to restart it so not a big deal um you also want to run this program as an administrator now this only applies if you have Windows Vista or Windows 7 so please do keep that in mind so we're going to run the program here and I will give you guys a quick little demo so just like on the other jailbreak it's going to ask us for our ipsw uh at this point you should hopefully have it so we're just going to have it process the firm really quickly here okay so once it successfully identifies our ipsw we can click next take just a moment to prepare the jailbreak data we'll be good to go uh just a really quick warning here of course just to be sure before we go any further you should have your iPod Touch iPhone or iPad plugged into your device rather your computer it should be on 4.3.1 it does not matter if it was was previously jailbroken using red snow or snow Breeze or not as this of course like I said will run over your previous jailbreak without causing you any issues okay so once it's finished you will see a couple of options here now if you have not jailbroken before be sure to check and make sure that install city is checked however if you already did install cyia and you've already jailbroken we want to unclick this so as you guys can see here I already have CIA installed so I'm going to not install City again now there's going to be a couple of other options including custom bundle and a couple of others however what we're looking for is allow boot animation so as you guys can see here you can install boot animations from Cydia so we're good going to be good to go just be sure that you want to uh enable this no matter what if you're jail if this is the first time you're jailbreaking or you're just rerunning this over okay so next we're going to need to come over to our device and put it into dfu mode so let me give you guys a little Tour on this here so with your iPod or iPhone of course you should have it all backed up uh same uh warning as always this you should not lose any data in this jailbreak but there's always a chance and if you have it backed up on iTunes you don't have anything really to lose so what we're going to need to do is have our device plugged in we need to turn it off so by simply holding the power button and then slide the power off now what the one thing that a lot of people have problems with is you guys can see there's a little pin wheel spinning wait until that pin wheel stops and the screen goes totally blank sometimes this just takes a couple of seconds other times it can take a minute or two so be sure that it is actually off otherwise you could run into some problems so as you can see here the pin wheel still spinning but we can just give that just one second we can continue on with the jailbreak okay so now we need to put it into dfu mode this is going to be a really simple procedure to hold the power button hold the power and home then release the power button and it of course will walk us through it so I click next it's going to hold the power button for 3 seconds we're going to start holding the power and the home for 10 seconds and of course the countdown will do that so you guys can just keep an eye on that and it'll it'll walk you through it pretty easily here and so now we can remove the power button and continue holding the home button until it says we get the all clear uh it says 15 seconds almost always it takes 5 or 10 in my opinion but there we go so now we can let go of our iPod or iPhone and just let Red Snow work its magic okay so it just finished so as soon as we're done you should still either see cyia now appear on your device or if it was already on there you won't really notice any difference however now you can download animated boot logos from Cydia so anyway guys that was a quick tutorial just showing you how to do that well maybe it was not such a quick tutorial but not a big deal and if you want those animated boot logos this is definitely the easiest fastest way to get them anyway if you have any questions or comments feel free to leave them in the comment section below and if you enjoyed feel free to subscribe right above I do lots of other jailbreaking content so if you found this helpful be sure to subscribe and I would appreciate ittoday I'm here with a tutorial showing you how to enable animated boot logos on your iPhone iPod touch or iPad now the way we're going to be using this is red snow now this is the updated version of Red Snow from a few days ago when I showed you guys the tutorial so if you've already Run Red Snow and no we're going to keep that but if you've already Run Red Snow then you don't have anything to worry about you can just rerun this over the top of it and all it will do is enable animated boot logos so if you've already done that you're good to go um otherwise I will give you guys a quick tutorial showing you how to jailbreak uh really simply as always you need to uh hook your iPod iPhone or iPad into the computer and let it back up through iTunes uh now this is uh compatible with all the same devices from the previous jailbreak so it means the iPod Touch third and fourth generation the iPhone 3GS iPhone 4 and the iPad 1 this does not support the iPad 2 yet there's another jail bre coming for you guys so if you have an iPad 2 just hang tight for a little bit longer so let's go ahead and get this started so the to two things we're going to need as the ipsw for our device um this should be pretty simple especially if you just did the Red Snow jailbreak You' probably already got it hanging around if not check out the link in the description I will have a link showing you how to find it or download it whichever you need to do you also need to download red snow which of course will also be in the description so if you're on Windows it's going to be really simple you need to right click the red snow program and click on properties then you need to come over to the compatibility Tab and have it run this program in compatibility mode for Windows XP Service Pack 3 uh now I did have a couple of questions from last time uh now XP Service Pack 3 is what works best for me however if that's not showing on your uh operating system or anything like that feel free to try a different one it should work the same way you can just experiment around worst case scenario it just doesn't work and you just have to restart it so not a big deal um you also want to run this program as an administrator now this only applies if you have Windows Vista or Windows 7 so please do keep that in mind so we're going to run the program here and I will give you guys a quick little demo so just like on the other jailbreak it's going to ask us for our ipsw uh at this point you should hopefully have it so we're just going to have it process the firm really quickly here okay so once it successfully identifies our ipsw we can click next take just a moment to prepare the jailbreak data we'll be good to go uh just a really quick warning here of course just to be sure before we go any further you should have your iPod Touch iPhone or iPad plugged into your device rather your computer it should be on 4.3.1 it does not matter if it was was previously jailbroken using red snow or snow Breeze or not as this of course like I said will run over your previous jailbreak without causing you any issues okay so once it's finished you will see a couple of options here now if you have not jailbroken before be sure to check and make sure that install city is checked however if you already did install cyia and you've already jailbroken we want to unclick this so as you guys can see here I already have CIA installed so I'm going to not install City again now there's going to be a couple of other options including custom bundle and a couple of others however what we're looking for is allow boot animation so as you guys can see here you can install boot animations from Cydia so we're good going to be good to go just be sure that you want to uh enable this no matter what if you're jail if this is the first time you're jailbreaking or you're just rerunning this over okay so next we're going to need to come over to our device and put it into dfu mode so let me give you guys a little Tour on this here so with your iPod or iPhone of course you should have it all backed up uh same uh warning as always this you should not lose any data in this jailbreak but there's always a chance and if you have it backed up on iTunes you don't have anything really to lose so what we're going to need to do is have our device plugged in we need to turn it off so by simply holding the power button and then slide the power off now what the one thing that a lot of people have problems with is you guys can see there's a little pin wheel spinning wait until that pin wheel stops and the screen goes totally blank sometimes this just takes a couple of seconds other times it can take a minute or two so be sure that it is actually off otherwise you could run into some problems so as you can see here the pin wheel still spinning but we can just give that just one second we can continue on with the jailbreak okay so now we need to put it into dfu mode this is going to be a really simple procedure to hold the power button hold the power and home then release the power button and it of course will walk us through it so I click next it's going to hold the power button for 3 seconds we're going to start holding the power and the home for 10 seconds and of course the countdown will do that so you guys can just keep an eye on that and it'll it'll walk you through it pretty easily here and so now we can remove the power button and continue holding the home button until it says we get the all clear uh it says 15 seconds almost always it takes 5 or 10 in my opinion but there we go so now we can let go of our iPod or iPhone and just let Red Snow work its magic okay so it just finished so as soon as we're done you should still either see cyia now appear on your device or if it was already on there you won't really notice any difference however now you can download animated boot logos from Cydia so anyway guys that was a quick tutorial just showing you how to do that well maybe it was not such a quick tutorial but not a big deal and if you want those animated boot logos this is definitely the easiest fastest way to get them anyway if you have any questions or comments feel free to leave them in the comment section below and if you enjoyed feel free to subscribe right above I do lots of other jailbreaking content so if you found this helpful be sure to subscribe and I would appreciate it