**Introducing My Personalized Build: A Review of the Be Quiet! 802 Case**

As I'm building this system, I want to show you how it's done as if it was my own personal choice. I've got a unique twist on this case, and that is, instead of putting the damped front sound panel on, I'll be using the high-flow mesh front option that comes with it.

**Airflow Performance: A Major Improvement Over the 700**

In my opinion, the Be Quiet! 700 had a bit of an airflow problem. It was good, but I wished it was better. And that's exactly what Be Quiet! answered with the 802. I'm very impressed with this case's airflow performance. The airflow is feeling really good, and I can still feel air a good foot away without any issues whatsoever.

**The Build: A Four-Star Review of the 360**

As we build the system, we'll find out how it performs under load. But for now, let me tell you that I'm not going to review the Be Quiet! 360 as a five-star product just yet. It's not because it sucks; it's just that there's a slight bow in the frame where two screws should be. Other than that, the air bleed is somewhat normal, and the system is moving a lot of air.

**The Be Quiet! Matrix 240: A Perfect Fan System?**

On the other hand, I'll definitely give the Be Quiet! Matrix 240 a five-star rating. There's hardly any air leak whatsoever, just a little bit around one area, but that's it. You can't expect a perfect fan system without some sort of static pressure push.

**The Water Build: Get Involved and Help Name This PC!**

Moving forward, I'll be getting more of my water build done, and I'd love for you to help name this PC. If you've got any suggestions, please comment below or share them with me on social media.

**A Huge Thank You to Be Quiet!**

I also want to thank Be Quiet! for sending the Dark Rock Pro 4 as a giveaway prize. They've been an amazing partner since I was about 200 subscribers. I'm grateful for their support and look forward to working together more in the future.

**The Giveaway: Don't Miss Out on This Opportunity!**

Lastly, don't forget that Be Quiet! will be giving away one of these Dark Rock Pro 4 coolers on my next live stream. To enter, make sure you're subscribed to my channel and have your notifications turned on. The giveaway will take place by the end of this month, so keep an eye out for more information.

**Stay Tuned for More Updates!**

That's it for now. I hope you enjoyed this article, and please stay tuned for more updates from me in the future.

WEBVTTKind: captionsLanguage: enwelcome back to an exciting new challenge and what it is before we get into this video please like share subscribe or whatever it is that you need to do that you didn't do because we are also beyond our giveaways you guys already know that we have a team up with mano and we're giving away three different microphones on the 15th of this month okay so 04 15 i should hopefully get the response where the information will be all in at by end of day and within a few days i should have the winners well be quiet we're no stranger to be quiet here on this channel they're one of my beloved products we have the be quiet test bench i'm building in the new 802 that's right so this case is not even out yet for the public we are working on it we're trying to build my new custom system and that is where the custom water loops going and i want to talk about the fans that are going in today but before we do that be quiet has sent the dark rock pro 4 for giveaway which we're going to be doing on a live stream when we get a little nearer to the 3 000 subscriber mark so this is about 130 140 i think 129 dollars somewhere around there canadian cooler that is in my editing machine keeping my machine in the low 40 degree temp area even while compressing my videos this cooler is by far one of the best air coolers i've ever had the opportunity to use and i want to give back and be quiet has generously sent it for me to give to one of you lucky people so guys please like share subscribe and remember to follow because you're going to want to know when that live stream is happening you might be one of the lucky ones to get this cooler now before i start this is not a sponsored video in any which way or form it is me looking for some high flow fans now the matrix 240 and the matrix 360 have arrived boxes are empty because they are here they're already installed i wanted to have them installed so that way i know how i'm going to do this video where i want to see and let you see as the viewer what you get when you take one of these out of the box and what you're going to expect and then what kind of airflow is coming through this radiator so i have this one as a pull in pulling air through my radiator through the front into the system good idea we're going to find out the 360 is pulling air from the system up through the radiator exhausting the heat through the top so what i want to do first we're going to find out what are they like light modes okay so every fan kit comes with this cable you have your sata power i think this is a reset uh button replacement where you can change things off the reset button not 100 there and then you have your controller here with your different modes already on this here so you don't have to plug it into your board but you can and then there's the uh digital argb header right here that plugs into your daisy chain you can daisy chain these so i don't need to use two of these i can use one and it'll control both perfectly fine and if i want i can actually plug in other fans to run in sync with this setup guys let's get to it let's find out do these work well because if not man are they going back because i would be very upset i can't really tell you how they're going to cool right now but i will know pretty much by the airflow as i've tested many water cool radiators whether it be aios or custom i've seen a lot and i'll know by air movement coming through the radiator whether i have pretty much a winner or a loser now in this system i won't get into too hard but there's three radiators three this is going to be a very interesting and very hard build but i'm working on it and in order for me to move forward we gotta get this review done so now we have it lit up we have them running i kind of have to i have to put my fan back there's air coming through already and we are not forcing any power through these fans yet and there's good cold air coming through the top really decent so that that's a good indication because these are supposed to have a static pressure of over two so i'm gonna say 2.1 2.3 somewhere around there that's actually pretty impressive when you actually go around shopping for fans uh this one here is about 55 canadian and i think it's about 63 canadian for the 360. so well priced for a product that doesn't need uh one only four rad screws on both so there's no center screws i'll get to that in a little bit uh what we're going to do now of course we're going to play around with the light mode so the first button here will do oh there we go now i'm matching to be quiet test bench and there's different things that this one button is going to do for this product i think there's even speeds yeah there we go as you can see all kinds of different speeds going on it's really moving and then slows down so there's quite a few speed modes here which is very impressive um of course now you have your different color things going on to uh kind of get where you want and and little coolness like look at this and not only that the lighting's on the sides too so you're getting that overall neat view that you weren't getting before uh with a normal fan just trying to see if there's a mode here i can fall in love with let's see what so we know the center button speed but what does this button do so this button is pretty much going to change our color modes and it looks like tints of the colors as well i just want to try and play around with uh so there's a bunch of different ones going on so it just gives you an idea of some lighting which is actually really nice i mean the argb looks pretty impressive if i'm correct there's about i'm not sure if it's 58 leds in this or not there's quite a few leds in this that's something i would have to look up i could put a little note there if i'm wrong and then we'll figure that out from there but uh well packed well nice what i want to find out now is if i wasted my money because for just over about 130 canadian am i going to cool my system down and that is very important because that is why i bought it so one thing i want to get into before i start that is the sag in the center of the 360 it does bow a little it's kind of expected now what asia horse could have done and if they do watch this video they could have put maybe a staggered screw system in the center where at least screwed into two of the four holes one on each side kind of diagonal and that would have been completely eliminated now what i want to find out is does it affect my airflow because that means air is coming out the side which i do feel right now there is still a lot of air coming up through the front here and we haven't even pushed the fans yet so it may not be a factor but it does kind of bother me because i'm sure that if we did put that up there like that well didn't really feel much different so let's try and push the fans wow now as i'm doing this i'm trying to compare them to the be quiet fans as well because if anybody doesn't know by now the be quiet fans are probably some of the best fans you can ever put on a radiator uh with the right fan and uh be quiet move a lot of air at a slower rpm and a lot less noise right now you're hearing these things these things do have some bite as far as noise go but that doesn't make it a bad thing remember nothing's put together yet it's wide open okay i have to say that i am really impressed here there is a lot of cold air flying through these reds now the air should be cold at this point but i didn't need this much airflow with the three rods and i'll explain why uh not only do i have a cooling pump going through the loop like anybody would with a closed or a custom loop i have three three radiators two fans on this one as you can see here in the block and then there's three on the 360. and then i have a cooler master high flow air or argb down on the bottom which is not active right now because we're not talking about that one we're talking about these asia horses and i gotta say holy cow that's a lot of air that is a lot of air i guess the true test is going to come down to when i put the whole front and everything on how will they perform right now they're performing probably at best that i've ever used as far as yeah they're moving more air than to be quiet right now keep in mind they are also louder but not a lot they're doing very well and how can you not like this design it just looks absolutely gorgeous it's going to give your system a show that you never had before remember a couple things here this case being the 802 is not out yet you've probably seen reviews there's reviews out there that's why i'm doing this differently i'm going to show you this case done as a personal choice and that is building it as if it was my own because it is so instead of putting the dampered front sound panel on because this case comes with options i'm going to be putting the high flow mesh front on that's right so be quiet has listened their ears are open the 700 in my opinion had a bit of a airflow problem it was pretty good but i wished it was better and they answered that with the 802. so guys i am very impressed with this i'm very impressed with the airflow the airflow is feeling really good i feel air a good foot away no issues whatsoever i'm still feeling air so i mean they they're moving air now it's a question of what's going to happen under load as we build the systems we'll find that out i guess i got about 45 days to do that because then i lose my return window but from what i'm feeling i don't think i'm gonna go wrong i'm gonna you know when i do an actual amazon review i'm going to review the 360 as a four star and it's not because it sucks it's just because of the bow that's in the frame because they should have put two screws there other than that it's moving a lot of air the air bleed is still somewhat normal so i'm not going to say it's bad but it's not perfect the 240 will definitely get a 5 star rating for the simple reason there is really hardly any air leak whatsoever a little bit around here but there's no bow to it and that makes it i mean you're not going to get a perfect fan system that doesn't have air bleed that is not going to happen you're going to have some sort of static pressure push it's got to happen in fact it might be because of these fans here that i'm feeling that no it's a little bit here so anyway uh that is the review of the asia horse matrix 240 and matrix 360 and moving forward i get to start getting more of my water build done and introduce maybe you guys should come up with a name for this you guys want to try that comment below if you want to try and name this shoot some names out what should we call this pc i'd also like to thank be quiet for sending the dark rock pro 4 as a giveaway as i near my 3 000 subscriber mark be quiet has been a great help since i was about 200 subscribers they've been behind me and i got to appreciate that huge i didn't even know how good these products were until i started using them myself i would not tell you they're good if they were not that i can promise you i am using this cooler again on my editing computer it's the only non water cooled computer in my office and the reason for that is i'm in the 40 degree temperature between 40 and 50 usually low 40s even while rendering i cannot be upset with that with this cooler so i'm very impressed with it and hopefully one lucky person is going to get to keep this so please make sure you're subscribed and your belt and ring the notifications whatever so that you will know when the live stream happens that this is going to be given away on there's also going to be a few other things and keep in mind you only have till this month oh for 15 21 to go to the links if you uh i'll have a link below for it there is or i'll link the video actually so you can go to the video and in that video there's links keep that in mind in that video there's links down below that mano has given away three different microphones with me three different microphones you have to go to the website that they created for my giveaway register so that i can get that information and find out who the winner is after the 15th so guys thank you for watching game over youwelcome back to an exciting new challenge and what it is before we get into this video please like share subscribe or whatever it is that you need to do that you didn't do because we are also beyond our giveaways you guys already know that we have a team up with mano and we're giving away three different microphones on the 15th of this month okay so 04 15 i should hopefully get the response where the information will be all in at by end of day and within a few days i should have the winners well be quiet we're no stranger to be quiet here on this channel they're one of my beloved products we have the be quiet test bench i'm building in the new 802 that's right so this case is not even out yet for the public we are working on it we're trying to build my new custom system and that is where the custom water loops going and i want to talk about the fans that are going in today but before we do that be quiet has sent the dark rock pro 4 for giveaway which we're going to be doing on a live stream when we get a little nearer to the 3 000 subscriber mark so this is about 130 140 i think 129 dollars somewhere around there canadian cooler that is in my editing machine keeping my machine in the low 40 degree temp area even while compressing my videos this cooler is by far one of the best air coolers i've ever had the opportunity to use and i want to give back and be quiet has generously sent it for me to give to one of you lucky people so guys please like share subscribe and remember to follow because you're going to want to know when that live stream is happening you might be one of the lucky ones to get this cooler now before i start this is not a sponsored video in any which way or form it is me looking for some high flow fans now the matrix 240 and the matrix 360 have arrived boxes are empty because they are here they're already installed i wanted to have them installed so that way i know how i'm going to do this video where i want to see and let you see as the viewer what you get when you take one of these out of the box and what you're going to expect and then what kind of airflow is coming through this radiator so i have this one as a pull in pulling air through my radiator through the front into the system good idea we're going to find out the 360 is pulling air from the system up through the radiator exhausting the heat through the top so what i want to do first we're going to find out what are they like light modes okay so every fan kit comes with this cable you have your sata power i think this is a reset uh button replacement where you can change things off the reset button not 100 there and then you have your controller here with your different modes already on this here so you don't have to plug it into your board but you can and then there's the uh digital argb header right here that plugs into your daisy chain you can daisy chain these so i don't need to use two of these i can use one and it'll control both perfectly fine and if i want i can actually plug in other fans to run in sync with this setup guys let's get to it let's find out do these work well because if not man are they going back because i would be very upset i can't really tell you how they're going to cool right now but i will know pretty much by the airflow as i've tested many water cool radiators whether it be aios or custom i've seen a lot and i'll know by air movement coming through the radiator whether i have pretty much a winner or a loser now in this system i won't get into too hard but there's three radiators three this is going to be a very interesting and very hard build but i'm working on it and in order for me to move forward we gotta get this review done so now we have it lit up we have them running i kind of have to i have to put my fan back there's air coming through already and we are not forcing any power through these fans yet and there's good cold air coming through the top really decent so that that's a good indication because these are supposed to have a static pressure of over two so i'm gonna say 2.1 2.3 somewhere around there that's actually pretty impressive when you actually go around shopping for fans uh this one here is about 55 canadian and i think it's about 63 canadian for the 360. so well priced for a product that doesn't need uh one only four rad screws on both so there's no center screws i'll get to that in a little bit uh what we're going to do now of course we're going to play around with the light mode so the first button here will do oh there we go now i'm matching to be quiet test bench and there's different things that this one button is going to do for this product i think there's even speeds yeah there we go as you can see all kinds of different speeds going on it's really moving and then slows down so there's quite a few speed modes here which is very impressive um of course now you have your different color things going on to uh kind of get where you want and and little coolness like look at this and not only that the lighting's on the sides too so you're getting that overall neat view that you weren't getting before uh with a normal fan just trying to see if there's a mode here i can fall in love with let's see what so we know the center button speed but what does this button do so this button is pretty much going to change our color modes and it looks like tints of the colors as well i just want to try and play around with uh so there's a bunch of different ones going on so it just gives you an idea of some lighting which is actually really nice i mean the argb looks pretty impressive if i'm correct there's about i'm not sure if it's 58 leds in this or not there's quite a few leds in this that's something i would have to look up i could put a little note there if i'm wrong and then we'll figure that out from there but uh well packed well nice what i want to find out now is if i wasted my money because for just over about 130 canadian am i going to cool my system down and that is very important because that is why i bought it so one thing i want to get into before i start that is the sag in the center of the 360 it does bow a little it's kind of expected now what asia horse could have done and if they do watch this video they could have put maybe a staggered screw system in the center where at least screwed into two of the four holes one on each side kind of diagonal and that would have been completely eliminated now what i want to find out is does it affect my airflow because that means air is coming out the side which i do feel right now there is still a lot of air coming up through the front here and we haven't even pushed the fans yet so it may not be a factor but it does kind of bother me because i'm sure that if we did put that up there like that well didn't really feel much different so let's try and push the fans wow now as i'm doing this i'm trying to compare them to the be quiet fans as well because if anybody doesn't know by now the be quiet fans are probably some of the best fans you can ever put on a radiator uh with the right fan and uh be quiet move a lot of air at a slower rpm and a lot less noise right now you're hearing these things these things do have some bite as far as noise go but that doesn't make it a bad thing remember nothing's put together yet it's wide open okay i have to say that i am really impressed here there is a lot of cold air flying through these reds now the air should be cold at this point but i didn't need this much airflow with the three rods and i'll explain why uh not only do i have a cooling pump going through the loop like anybody would with a closed or a custom loop i have three three radiators two fans on this one as you can see here in the block and then there's three on the 360. and then i have a cooler master high flow air or argb down on the bottom which is not active right now because we're not talking about that one we're talking about these asia horses and i gotta say holy cow that's a lot of air that is a lot of air i guess the true test is going to come down to when i put the whole front and everything on how will they perform right now they're performing probably at best that i've ever used as far as yeah they're moving more air than to be quiet right now keep in mind they are also louder but not a lot they're doing very well and how can you not like this design it just looks absolutely gorgeous it's going to give your system a show that you never had before remember a couple things here this case being the 802 is not out yet you've probably seen reviews there's reviews out there that's why i'm doing this differently i'm going to show you this case done as a personal choice and that is building it as if it was my own because it is so instead of putting the dampered front sound panel on because this case comes with options i'm going to be putting the high flow mesh front on that's right so be quiet has listened their ears are open the 700 in my opinion had a bit of a airflow problem it was pretty good but i wished it was better and they answered that with the 802. so guys i am very impressed with this i'm very impressed with the airflow the airflow is feeling really good i feel air a good foot away no issues whatsoever i'm still feeling air so i mean they they're moving air now it's a question of what's going to happen under load as we build the systems we'll find that out i guess i got about 45 days to do that because then i lose my return window but from what i'm feeling i don't think i'm gonna go wrong i'm gonna you know when i do an actual amazon review i'm going to review the 360 as a four star and it's not because it sucks it's just because of the bow that's in the frame because they should have put two screws there other than that it's moving a lot of air the air bleed is still somewhat normal so i'm not going to say it's bad but it's not perfect the 240 will definitely get a 5 star rating for the simple reason there is really hardly any air leak whatsoever a little bit around here but there's no bow to it and that makes it i mean you're not going to get a perfect fan system that doesn't have air bleed that is not going to happen you're going to have some sort of static pressure push it's got to happen in fact it might be because of these fans here that i'm feeling that no it's a little bit here so anyway uh that is the review of the asia horse matrix 240 and matrix 360 and moving forward i get to start getting more of my water build done and introduce maybe you guys should come up with a name for this you guys want to try that comment below if you want to try and name this shoot some names out what should we call this pc i'd also like to thank be quiet for sending the dark rock pro 4 as a giveaway as i near my 3 000 subscriber mark be quiet has been a great help since i was about 200 subscribers they've been behind me and i got to appreciate that huge i didn't even know how good these products were until i started using them myself i would not tell you they're good if they were not that i can promise you i am using this cooler again on my editing computer it's the only non water cooled computer in my office and the reason for that is i'm in the 40 degree temperature between 40 and 50 usually low 40s even while rendering i cannot be upset with that with this cooler so i'm very impressed with it and hopefully one lucky person is going to get to keep this so please make sure you're subscribed and your belt and ring the notifications whatever so that you will know when the live stream happens that this is going to be given away on there's also going to be a few other things and keep in mind you only have till this month oh for 15 21 to go to the links if you uh i'll have a link below for it there is or i'll link the video actually so you can go to the video and in that video there's links keep that in mind in that video there's links down below that mano has given away three different microphones with me three different microphones you have to go to the website that they created for my giveaway register so that i can get that information and find out who the winner is after the 15th so guys thank you for watching game over you