Hi-Power Nerf Cannon!
# DIY High-Powered Nerf Cannon: A Step-by-Step Guide
by [Your Name]
If you're looking to upgrade your basic Nerf gun into a high-powered weapon, you've come to the right place. In this article, we'll guide you through the process of transforming your ordinary Nerf gun into an impressive Nerf cannon capable of shooting projectiles up to 65-70 feet! This project combines creativity, some DIY skills, and a bit of excitement—so let’s get started.
---
## The Ordinary Nerf Gun: A Fun but Limited Toy
The video begins by introducing the "reactor model" Nerf gun, which is described as underpowered. While it's fun to shoot, its limited range isn't ideal for serious gameplay or backyard battles. The narrator emphasizes that you shouldn’t point the original gun at anyone unless it’s “you” (a playful jab at the viewer). But fear not! With a few modifications, we can turn this basic Nerf gun into something much more powerful.
---
## Step 1: Disassembling the Nerf Gun
The first step is to gather your tools and start taking apart the Nerf gun. Begin by removing the plastic cap and the long spring. Next, remove all the screws to separate the handle assembly from the rest of the gun. The white pressure chamber slides off the barrel easily, so take note of that.
Now comes the part where you have to bust out the orange nozzle, the white ring, and the little rubber gasket. Sand the edges of the hole you just created to make it smooth—this is important for ensuring a good seal later on.
---
## Step 2: Preparing the Pressure Chamber
Next, you’ll need to drill two small holes in the front end of the pressure chamber. The screws should be placed about 1/16th of an inch apart. Sanding the edges here is crucial to avoid any rough spots that might damage your components.
---
## Step 3: Adding the Igniter
This is where things get a bit more exciting. You’ll need an igniter for your Nerf cannon, and the video suggests using a fireplace lighter. Gut the lighter by removing the butane tank, leaving only the electric igniter strip. Strip both ends of the wires to expose the metal, then attach one lead to each screw in the pressure chamber.
Pressing the igniter should create a decent spark between the two screws. This ignition system will be key to propelling your Nerf balls much further than before.
---
## Step 4: Modifying the Handle and Barrel
To access the pressure chamber, which will now serve as your fuel tank, you’ll need to cut a hole in the back of the handle housing and another in the pressure chamber itself. A small cork will be used to close the hole after adding fuel, but you’ll need to add a screw to the cork for easy removal and resealing.
The video mentions epoxying the fuel tank to the barrel and gluing the electric igniter into place. A small cutout in the handle allows access to the ignition system, ensuring everything is securely fastened.
---
## Step 5: Testing Your High-Powered Nerf Cannon
Finally, it’s time to test your creation! Drop a Nerf ball into the gun, add a shot of fuel (the video uses unscented deodorant as fuel), and seal the hole with the cork. When you trigger the igniter, watch as the Nerf ball flies through the air—this cannon packs a punch, capable of shooting up to 65-70 feet! Even the little Nerf balls get scorched with burn spots, adding an extra layer of cool to your shots.
---
## Conclusion: DIY Nerf Cannon Success
Congratulations! You’ve successfully transformed your ordinary Nerf gun into a high-powered Nerf cannon capable of delivering long-range shots and even leaving burn marks on your projectiles. This project is perfect for backyard fun or impressing friends with some serious Nerf warfare.
For more exciting DIY projects, be sure to check out the channel for other cool videos or click here for more explosions and loud things. Thanks for watching, and we’ll see you next time!
---
This article provides a detailed, step-by-step guide to creating your own high-powered Nerf cannon, following the full transcription of the video.