**Snowblind X4 and Ibuypower**

The Snowblind X4 is an upcoming case that has been making waves in the PC enthusiast community. Ibuypower, the company behind this project, was keen to share some details about the case and its features with us.

One of the most notable aspects of the Snowblind X4 is its airflow capabilities. According to Ibuypower, they are using liquid cooling to enhance the airflow within the case, which should provide improved ventilation for components. However, it's worth noting that this feature may not be a major selling point, as the airflow is likely to be compensated by other means.

Ibuypower also mentioned that the case will be marketed as a high-airflow case, which could potentially set it apart from other cases on the market. This suggests that the company is trying to position the Snowblind X4 as a premium product with advanced features.

In terms of specifications, the Snowblind X4 has 18.5-inch wide panels with a resolution of 1366 x 768 pixels. These panels are likely to be used for video playback and display applications, such as watching movies or playing games.

However, Ibuypower also pointed out that one of the biggest challenges they faced was dealing with multiple display outputs from modern graphics cards. Specifically, they mentioned that most Nvidia cards have only one HDMI output, which can limit the number of displays that can be connected to a single card. To overcome this issue, Ibuypower uses an MST (Multi-Stream Transport) connection, which allows them to connect multiple displays to a single graphics card.

Moving on to the Revolt 3, we have a smaller case that is currently in prototype stages and is expected to become a shipping product soon. The Revolt 3 has been updated from its predecessor, but it's still a work in progress due to customs and government shutdown issues.

One of the most interesting features of the Revolt 3 is its ability to accommodate mini ITX boards with PCIe bifurcation cards. This allows users to split their graphics card into two separate outputs, which can be useful for applications such as SLI (Scalable Link Interface) or Crossfire. However, this feature requires an Nvidia SLI certification, which can be expensive.

The Revolt 3 also features a unique design with a split-level side panel and a rail system that allows the height to be adjusted while remaining stable and structurally sound. The case has a 200mm fan and a 180 radiator in the bottom, although it's possible that users could opt for larger radiators instead.

The Revolt 3 is expected to have tempered glass on several sides and possibly mesh panels in the bottom for improved ventilation. However, these features are still subject to change as the case goes through finalization stages.

In terms of aesthetics, the Revolt 3 is designed to be visually appealing, with a small form factor that makes it suitable for compact builds. Users may also be able to flip the case on its side, although this would be more of a consequence of physics rather than a deliberate design feature.

Overall, both the Snowblind X4 and the Revolt 3 seem like promising cases that are designed to cater to specific needs and preferences in the PC enthusiast community. However, it's worth noting that the Revolt 3 is still in prototype stages and may not be available for purchase just yet.

**Revolt 3**

The Revolt 3 is a smaller case that is currently in prototype stages and is expected to become a shipping product soon. Due to customs and government shutdown issues, the case has been delayed but Ibuypower is working hard to get it ready for release.

One of the most interesting features of the Revolt 3 is its ability to accommodate mini ITX boards with PCIe bifurcation cards. This allows users to split their graphics card into two separate outputs, which can be useful for applications such as SLI (Scalable Link Interface) or Crossfire.

The Revolt 3 features a unique design with a split-level side panel and a rail system that allows the height to be adjusted while remaining stable and structurally sound. The case has a 200mm fan and a 180 radiator in the bottom, although it's possible that users could opt for larger radiators instead.

The Revolt 3 is expected to have tempered glass on several sides and possibly mesh panels in the bottom for improved ventilation. However, these features are still subject to change as the case goes through finalization stages.

In terms of aesthetics, the Revolt 3 is designed to be visually appealing, with a small form factor that makes it suitable for compact builds. Users may also be able to flip the case on its side, although this would be more of a consequence of physics rather than a deliberate design feature.

Overall, the Revolt 3 seems like a promising case that is designed to cater to specific needs and preferences in the PC enthusiast community.

**Power Supply Considerations**

When it comes to power supplies, Ibuypower mentioned that users may need to consider SLI certification when choosing a graphics card for the Revolt 3. This can be an expensive option, especially for high-end graphics cards.

However, Ibuypower also pointed out that there are other options available for users who don't require SLI certification. These include PCIe bifurcation cards and other specialized power supplies that can handle multiple graphics cards.

Overall, the power supply considerations for the Revolt 3 will depend on the specific needs and preferences of each user.

"WEBVTTKind: captionsLanguage: enhere on earth at the iBUYPOWER suite now at CES 2019 there are two products here we're looking at primarily one is the revolt 3 which 3-ball - you might remember from like twenty fifteen or sixteen or something there's one of the first ads we ever did so we've all three here is here but this is far more interesting it's projects that snowblind x4 and project snowblind we've I think shown at CES and packs year after year for a couple of years now it's been more or less perfected on the panel inside and it for a recap if you don't remember it's just the side panel is an LCD and you get a display out on it a quick note here in a roll shots these will not be scaled correctly because I've removed two of the panel's so this is one of the panels but that's minor detail you'll see the correction and b-roll for the proper scaling before that this video is brought to you by the deep cool captain 240 Pro AO cooler the captain 240 Pro uses a bladder within the water tank to expand and contract based on liquid temperature as a leak prevention mechanism this works by birthing air at higher temperatures making for a unique closed-loop liquid cooler design the captain 240 Pro also expands upon the existing captain series by extending tube length for more flexible positioning and updating the LEDs learn more at the link in the description below so the paneling's been more or less perfected this is a very early prototype it was thrown together pretty quickly for the show so things will be cleaned up but the idea is it's four panels from the snowblind on one case and it's a cube so it's symmetrical making things a bit easier to mock up and then advanced upon that is the rotation so here's where it gets a bit difficult because you've clearly got sort of four different compartmentalize chambers or at least three it's about how you how you cut it up and all those have different cables I mean this reservoir over here pump res combo stuff like that they've got cables that are all routing somewhere and in order to hook it all up in a way that they don't get tangled as it spins they are routing through a center chamber and you'll see some b-roll shots we have that the cables feeding into that chamber and that's got a slip ring in it and then there's a bearing in the base that's sort of like the same thing you'd use for a high-end turntable or something like that where you might be rotating a heavy object for display so same type of thing here just the only really difficult part that had to be overcome was making sure the cables don't get all intertwined as it spins so kind of cool this is a halo product it's a CES showcase product far more interesting than some of the real products we've seen the show so we're happy about that if you're wondering about the price the mock-up was about eight grand and maybe plus or minus a little bit there but the production model is TBD so if you're interested in this you have to let them know in the comments because otherwise might not come to market but the original snowblind it was the same type of thing where the case was very much early prototype and there was a lot of interest in it and so I would power eventually started making it they have updated versions here actually have some footage up as well where the insides not really cleaned up and certainly look pretty good so same story there as here where it there has to be interest otherwise it just ends up being a showpiece but very expensive there's no real tooling for yet no dyes anything like that this was done mostly by hand the panels are the easy part here although they probably took the longest to put together because it was a years long process for the snowblind it's just the interior is is multiple bent steel sheets so I think if you know the snowblind you know most of this is just now it's a cube and and it rotates there were a few comments we saw or heard about at least online criticizing airflow which is always a fair critique in this one though it's the way it's set up is the top is is your exhaust in this current system and then the bottom does have a giant mesh hole in it so it does have cutouts for air it's got I think two to four TS right here and you can have two 40s in a case without having air flow it's been done see plenty of I don't know like fantex cases recently for example but in this one there's about an inch gap between the base the proper base and the rotating cube so there is hopefully sufficient room for air we would have to test that to really know but what you see is not what you get it's not like this is the only place the air can come in they can come in through the bottom too so I ultimately you don't spend the money on this type of system if it's going to have a hyper 212 in it so probably not really a huge deal anyway you can compensate remotes the airflow with liquid cooling and it all ultimately would come down to how they market it if it's marketed as a high airflow case and obviously that's a different story but yeah that's the that's the snowblind x4 and if you're interested in it you need to let ibuypower know we can move on to the revolt 3 I think oh one more note on the panels so they're 18 point five inch sixteen by nine and the resolution is 1366 by 768 which is the maximum resolution that our power could source for this panel size and aspect ratio so just to answer that question and the video playback engine is software on the host computer plays back the video you set in software and an abstract design like this will work a bit better because since it's playing across multiple panels you don't have any issues with things lining up properly and then also the biggest challenge I guess was in the top where we have some footage of the cabling dealing with multiple display outputs from a modern Nvidia card we're kind of capped at four outputs you have one HDMI out on most of the r-tx series except for some of the partner models and that's a challenge they all go through an MST and we have shots of how that's wired up AMD with Eyefinity probably a bit easier but working with Nvidia here so let's move on to the revolt 3 that's the next one it's a smaller case and it's been updated a bit but still in prototype stages the revolt 3 is a bit of a different story from the previous one because this one will become a shipping product this is a bit of a prototype so our understanding is that due to customs and the government shutdown it's not fully complete because they were trying to rush things through to make sure it got here in time for CES so some of the stuff like in the bottling bottom is incomplete like the mesh that you see down here clearly it's not going to be just a sheet that you can depress into the case when it's done so work in progress but the most interesting thing here that I wanted to bring up right away is that you can put in a mini ITX board and then use a bifurcation card so this PCIe bifurcation you plug it into the slot and then you can get two cards out and it just split 2 by 16 into 2 by 8 which is pretty interesting the challenge is that you would need an abort with nvidia sli certification for nvidia crossfire doesn't really have as strict requirements on that end it also can run with by 4 if you really want it to sli that requires by 8 and sli certification in about there's like a special switch that gets checked in the motherboard side so if it doesn't have that it won't work and that's not on Iowa power that's gonna be on board vendors but if if Nvidia will certify a board with a single slot as absent like capable then in theory you could insert this plug two cards in you get two by eight coming out of a SLIC certification though costs a whole lot of money it is depending on how you you purchase it it can be in the tens of thousands of dollars for the company so we'll see if that happens that there would be a board partner that would need to be willing to go through that process with NVIDIA and pay the dues in order to work with IRA power on that for for this but some companies have provided special BIOS versions that bypass some of that in the past so you might see that either way though the revolt 3 is the case itself you'll see some kind of split-level stuff in here where there's injustice side leg material there's a split where you can insert more of these and then there's a rail system that screws into it and that allows the height to be somewhat adjustable while remaining theoretically stable and and structurally sound so I mean it's a small case currently has about a 200 millimeter fan like a 180 in there as well or 180 radiator down on the bottom there could be 2 120 s instead if that route makes more sense this is still in finalization stages but the idea is you get tempered glass on a few sides and hopefully some mesh in the bottom I think is somewhat the plan ventilation on the top and then a small mini ITX form factor and obviously a very looks oriented build if you wanted to I guess you could flip it on its side but that's not really a feature as much as it is a a consequence of physics so that's the revote 3 thanks for watching as always subscribe for more go to patreon.com/scishow and exes it's helped us out directly or stored i cameras nexus dotnet i will see you all next timehere on earth at the iBUYPOWER suite now at CES 2019 there are two products here we're looking at primarily one is the revolt 3 which 3-ball - you might remember from like twenty fifteen or sixteen or something there's one of the first ads we ever did so we've all three here is here but this is far more interesting it's projects that snowblind x4 and project snowblind we've I think shown at CES and packs year after year for a couple of years now it's been more or less perfected on the panel inside and it for a recap if you don't remember it's just the side panel is an LCD and you get a display out on it a quick note here in a roll shots these will not be scaled correctly because I've removed two of the panel's so this is one of the panels but that's minor detail you'll see the correction and b-roll for the proper scaling before that this video is brought to you by the deep cool captain 240 Pro AO cooler the captain 240 Pro uses a bladder within the water tank to expand and contract based on liquid temperature as a leak prevention mechanism this works by birthing air at higher temperatures making for a unique closed-loop liquid cooler design the captain 240 Pro also expands upon the existing captain series by extending tube length for more flexible positioning and updating the LEDs learn more at the link in the description below so the paneling's been more or less perfected this is a very early prototype it was thrown together pretty quickly for the show so things will be cleaned up but the idea is it's four panels from the snowblind on one case and it's a cube so it's symmetrical making things a bit easier to mock up and then advanced upon that is the rotation so here's where it gets a bit difficult because you've clearly got sort of four different compartmentalize chambers or at least three it's about how you how you cut it up and all those have different cables I mean this reservoir over here pump res combo stuff like that they've got cables that are all routing somewhere and in order to hook it all up in a way that they don't get tangled as it spins they are routing through a center chamber and you'll see some b-roll shots we have that the cables feeding into that chamber and that's got a slip ring in it and then there's a bearing in the base that's sort of like the same thing you'd use for a high-end turntable or something like that where you might be rotating a heavy object for display so same type of thing here just the only really difficult part that had to be overcome was making sure the cables don't get all intertwined as it spins so kind of cool this is a halo product it's a CES showcase product far more interesting than some of the real products we've seen the show so we're happy about that if you're wondering about the price the mock-up was about eight grand and maybe plus or minus a little bit there but the production model is TBD so if you're interested in this you have to let them know in the comments because otherwise might not come to market but the original snowblind it was the same type of thing where the case was very much early prototype and there was a lot of interest in it and so I would power eventually started making it they have updated versions here actually have some footage up as well where the insides not really cleaned up and certainly look pretty good so same story there as here where it there has to be interest otherwise it just ends up being a showpiece but very expensive there's no real tooling for yet no dyes anything like that this was done mostly by hand the panels are the easy part here although they probably took the longest to put together because it was a years long process for the snowblind it's just the interior is is multiple bent steel sheets so I think if you know the snowblind you know most of this is just now it's a cube and and it rotates there were a few comments we saw or heard about at least online criticizing airflow which is always a fair critique in this one though it's the way it's set up is the top is is your exhaust in this current system and then the bottom does have a giant mesh hole in it so it does have cutouts for air it's got I think two to four TS right here and you can have two 40s in a case without having air flow it's been done see plenty of I don't know like fantex cases recently for example but in this one there's about an inch gap between the base the proper base and the rotating cube so there is hopefully sufficient room for air we would have to test that to really know but what you see is not what you get it's not like this is the only place the air can come in they can come in through the bottom too so I ultimately you don't spend the money on this type of system if it's going to have a hyper 212 in it so probably not really a huge deal anyway you can compensate remotes the airflow with liquid cooling and it all ultimately would come down to how they market it if it's marketed as a high airflow case and obviously that's a different story but yeah that's the that's the snowblind x4 and if you're interested in it you need to let ibuypower know we can move on to the revolt 3 I think oh one more note on the panels so they're 18 point five inch sixteen by nine and the resolution is 1366 by 768 which is the maximum resolution that our power could source for this panel size and aspect ratio so just to answer that question and the video playback engine is software on the host computer plays back the video you set in software and an abstract design like this will work a bit better because since it's playing across multiple panels you don't have any issues with things lining up properly and then also the biggest challenge I guess was in the top where we have some footage of the cabling dealing with multiple display outputs from a modern Nvidia card we're kind of capped at four outputs you have one HDMI out on most of the r-tx series except for some of the partner models and that's a challenge they all go through an MST and we have shots of how that's wired up AMD with Eyefinity probably a bit easier but working with Nvidia here so let's move on to the revolt 3 that's the next one it's a smaller case and it's been updated a bit but still in prototype stages the revolt 3 is a bit of a different story from the previous one because this one will become a shipping product this is a bit of a prototype so our understanding is that due to customs and the government shutdown it's not fully complete because they were trying to rush things through to make sure it got here in time for CES so some of the stuff like in the bottling bottom is incomplete like the mesh that you see down here clearly it's not going to be just a sheet that you can depress into the case when it's done so work in progress but the most interesting thing here that I wanted to bring up right away is that you can put in a mini ITX board and then use a bifurcation card so this PCIe bifurcation you plug it into the slot and then you can get two cards out and it just split 2 by 16 into 2 by 8 which is pretty interesting the challenge is that you would need an abort with nvidia sli certification for nvidia crossfire doesn't really have as strict requirements on that end it also can run with by 4 if you really want it to sli that requires by 8 and sli certification in about there's like a special switch that gets checked in the motherboard side so if it doesn't have that it won't work and that's not on Iowa power that's gonna be on board vendors but if if Nvidia will certify a board with a single slot as absent like capable then in theory you could insert this plug two cards in you get two by eight coming out of a SLIC certification though costs a whole lot of money it is depending on how you you purchase it it can be in the tens of thousands of dollars for the company so we'll see if that happens that there would be a board partner that would need to be willing to go through that process with NVIDIA and pay the dues in order to work with IRA power on that for for this but some companies have provided special BIOS versions that bypass some of that in the past so you might see that either way though the revolt 3 is the case itself you'll see some kind of split-level stuff in here where there's injustice side leg material there's a split where you can insert more of these and then there's a rail system that screws into it and that allows the height to be somewhat adjustable while remaining theoretically stable and and structurally sound so I mean it's a small case currently has about a 200 millimeter fan like a 180 in there as well or 180 radiator down on the bottom there could be 2 120 s instead if that route makes more sense this is still in finalization stages but the idea is you get tempered glass on a few sides and hopefully some mesh in the bottom I think is somewhat the plan ventilation on the top and then a small mini ITX form factor and obviously a very looks oriented build if you wanted to I guess you could flip it on its side but that's not really a feature as much as it is a a consequence of physics so that's the revote 3 thanks for watching as always subscribe for more go to patreon.com/scishow and exes it's helped us out directly or stored i cameras nexus dotnet i will see you all next time\n"